#96: the sim TIME MODEL closed from bytes -- myomer kinetic term restored to the faithful 28 Hz

The open question under every heat bracket was what the 1995 sim does with
time. Answered at the byte level:

* FUN_0041c018 IS the arcade Simulation::PerformAndWatch: slice =
  (till.ticks - last.ticks) / DAT_0052140c, stored, Perform(slice) --
  VARIABLE-STEP in real SECONDS, line-for-line the WinTesla SIMULATE.cpp
  body. Every dt-carrying reconstruction is unit-faithful; no tick/second
  gap exists anywhere.
* The myomer heat term's ONE caller is the unexported MyomersSimulation
  body @0x4b8b9a (E8-scan + raw disasm; export gap): once per Perform, raw
  slice, gated measuredVoltage>0 only. The dt-less kinetic pulse therefore
  fires at the FRAME cadence -- 28 Hz nominal, sagging under load
  (emergent hardware, not a code constant).
* Mover velocity is u/s (dead-reckoner @0x421f7c: pos += vel x ticksD/28),
  so the v operand is unit-faithful too.

The 0.5 "loaded-rate" witness bracket is RETIRED -- it modeled the sag as
a constant, wrong in exactly the reported scenario (open-field cruising is
a light scene; the pod held ~28 there). kSeekHeatCalib = 1.0.

Measured at the faithful rate (madcat cruise benches): recommended gear
equilibrates ~1450 -- inside the authored degradation band as a SOFT 20%
output governor (heatFactor = 1 - d^2/range^2), weapons untouched at
~110-150, ZERO jams, zero bay fires from movement alone; supercharge
~1770 (deep governor -- the manual's own expert-mode warning). That is
the authored system: degradeT=1000 is governor onset, failT=2000 the
cliff, and the coolant-loop controls are the player's lever.

New leads filed in open-questions: the climb term's gravity operand
samples 0 (bridge points at a dead cell); the engine Mover's own gravity
subtraction is per-frame dt-less (port impact unread); gait-noise phantom
acceleration feeds the accel term.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

context/decomp-reference.md

@@ -319,6 +319,22 @@ From the weapon `.SUB` records + the charge-curve `.data` constants (PE-parsed a
   Loaded ("full == the gear's seek voltage" is the arcade's own discharge algebra).  Repro +
   verify: BT_SEEKTEST seek-abuse -- pre-fix deadlocks at pct=0/alarm=3; post-fix 38 rescues,
   ends Loaded/pct=1.  `[seek]` log prints the per-gear table + rescue events.
+- **THE SIM TIME MODEL — CLOSED 2026-08-02 (issue #96) [T1]:** the arcade
+  `Simulation::PerformAndWatch` is **`FUN_0041c018`** (part_002.c:5101):
+  `slice = (till.ticks − this[4].ticks) / DAT_0052140c; this[4] = till;
+  (*this[7])(this, slice)` then watchers (`FUN_0041c08c`) + WriteSimulationUpdate
+  (`FUN_0041bd98`) — **VARIABLE-STEP, slice in real SECONDS**, line-for-line the
+  WinTesla SIMULATE.cpp body. Corollaries: every Performance's `time_slice` is
+  seconds in BOTH binary and port (no hidden tick/second unit gap); a dt-LESS
+  per-frame term (myomer kinetic @4b8d18's middle term; the Mover gravity
+  `-= **(mover+0x250)` @0x421e77) fires at the FRAME cadence = the tick rate,
+  28 Hz nominal, sagging under load. Mover velocity is u/s (the replicant
+  dead-reckoner @0x421f7c does `pos += vel × ticksΔ/DAT_0052140c`). The myomer
+  heat term's ONE caller is the **unexported MyomersSimulation body
+  @0x4b8b9a-0x4b8d0d** (E8-scan + raw disasm; the export gap hid it): calls
+  @4b8d18 once per Perform, raw slice, gated `measuredVoltage > 0` only — plus
+  a −0.011/Perform repair trickle at alarm 1 and `speedEffect(+0x31c) =
+  AvailableOutput(min(measuredV, seek gear, cap)) / owner->runSpeedBase(+0x34c)`.
 - **AMMO COOK-OFF cluster DECODED 2026-07-25 (issue #46, raw disasm `scratchpad/disammo.py`) [T1]:**
   `@004bd394` AmmoBinSimulation (arm on heatAlarm FAILURE / detonate / cancel-on-Empty);
   `@004bdb94` HandleMessage(1) = crit-induced arm; the FUSE = `Now().ticks +