The port had FUN_004a5bf8/71f4 fully reconstructed as AdvanceBody/Leg-
AnimationAirborne, gated on (MovementMode()==3||4) && jumpCapable@0x580 and
believed dead ("the test mech never jumps"). The binary says otherwise:
mech+0x40 in that gate is the graphicAlarm LEVEL (3=left-leg gimp, 4=right)
and +0x580 is hasGimpClips, set by the conditional loader block that probes
'wgl' and fills clip slots 22-27 (wgl/wgr/ggr/ggl/gsl/gsr) plus the four
measurements at 0x53c-0x548 (wg entry strides = speed caps, gg cycle strides).
Renamed the five jump* members + both drivers accordingly.
New: GimpBodyClipFinished @004a6344 / GimpLegClipFinished @004a7970 -- the
gimp transition machines, branched from the normal finished-callbacks. Phase-
correct limp entry (left-gimp enters 0x16/wgl only from a RIGHT step, right-
gimp 0x17/wgr from a LEFT step), gg cycles at gimp cadence, gs exits, and the
demand clamp to the gimped side's speed cap (leg cb writes it back into the
mapper -- the binary's authentic slowdown; the T3 x0.5 stand-in in mechmppr is
retired, BT_GIMP_SPEED now defaults 1.0). The binary's gimp machines have no
reverse entry -- the "reverse disabled" behavior is now binary-proven.
Reviving the dead drivers replayed two port-glue bugs (gotcha #24): the raw
*(controlSource) mapper read (null -> crash at first engagement) and the
missing alarm->member state re-sync (machine pinned in one run state). Both
fixed; bench harness gained BT_SELF_DAMAGE_TICKS=<n> to hold a zone past
LegHalfStructure without destroying it.
Bench-verified (madcat, novice, zone 16): crossing -> alarm 4 -> wgr entry
from a left step -> 8k+ frames stable in the ggl limp cycle at cadence 14.77
(vs 18.5 walk / 22+ run) with raw demand still 50. [T2]
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
User-reported recurrence of "legs stutter and lose sync". Live [sync] showed
advSum/legSum drifting 5->92 during walk-up churn, then locking. Reproduced
headlessly (BT_FORCE_OSC throttle feathering + BT_FORCE_TURN + the new
per-frame BT_SYNC_LOG probe) and root-caused in two parts:
- SEED: the bring-up turn-in-place trigger arms only the LEG channel, so the
walk re-entry lands one frame apart -> a persistent clip phase offset.
- AMPLIFIER: with offset clips the two end-of-clip callbacks fire on different
frames; a demand change landing between them picks DIFFERENT next states
(one channel winds down, the other keeps walking) -> opposite-phase churn
(observed bs=6 ls=7 -- body on walk-R, leg on walk-L).
Under v4 (display+travel = BODY) the out-of-phase LEG pose showed through on
every frame the body didn't write joints (Standing/wind-down) = the visible
stutter/pop.
DISASM GROUND TRUTH (neither Advance fn has a static decomp caller; found by
byte-scanning the CODE section for e8 calls):
- master perf (0x4a9b5c gap) -> AdvanceLegAnimation @0x4aa399 (air @0x4aa388)
-> -dist/dt into localVelocity (+0x1cc): the LEG drives LOCAL travel and
(writing last) the displayed pose;
- IntegrateMotion (0x4ab1c8, body advance @0x4ab312, caller FUN_004ab430 =
the projected-origin updater) -> -dist/dt into projectedVelocity (+0x2a0):
the BODY is the dead-reckoning PROJECTOR -- locally invisible.
v4's reading of FUN_004ab430 as the travel source was wrong.
FIX: advance body FIRST (projection; its writes get overwritten), leg LAST
(displayed pose); travel = legAdv under the two-channel split. Display ==
travel through the LEG by construction -- body-channel drift can no longer
become visible, structurally (not by input-symmetry luck).
Verified: trn+feathering repro clean; straight drive locked (adv==proj);
solo goto=enemy kill chain intact; MP 2-node drive-to-range cross-pod kill
intact (241 hits, DESTROYED); no crashes. KB corrected (locomotion.md roles
+ P3_LOCOMOTION.md v5 entry). New gated instruments: BT_SYNC_LOG,
BT_FORCE_OSC.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Clean, self-contained extraction of the BattleTech-specific work from the
reverse-engineering workspace -- engine + game + content + build, with nothing
from Red Planet or the raw archive dumps. Builds green (Win32) and runs the
single-player drive->animate->target->fire->damage->destroy loop out of the box.
Layout:
engine/ MUNGA + MUNGA_L4 shared 2007 engine, carrying our BT render/loader
work (bgfload/L4D3D/L4VIDEO: BSL bit-slice decode, LOD/ground/shadow
models) + image codec; the minimal rp/ headers the audio HAL needs
game/ reconstructed BT logic + surviving-original BT source + fwd shims
+ WinMain launcher
content/ full runtime tree (BTL4.RES, VIDEO/, GAUGE/, AUDIO/, eggs, BTDPL.INI)
docs/ format specs + reconstruction ledgers
reference/ raw Ghidra pseudocode (recon source-of-truth) + decomp exporter
tools/ MP console emulator + map/resource scanners
One top-level CMake builds munga_engine lib + bt410_l4 game lib + btl4.exe.
All paths relativized (186 fwd shims + ~437 CMake abs paths -> repo-relative);
DXSDK is the one external, overridable via -DDXSDK. Verified: builds to a
byte-identical 2.27MB exe and runs combat (TARGET DESTROYED, 0 crashes) against
the bundled content.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
