39144813a4bfd5ab42bf101cfe8205a66591572e
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
654277bb7b |
pod: freeze the ALPHA-MR rig in environ.ini (BT_FIT, L4PLASMA=NONE)
The cart's display config was carried by a launcher .bat, so it only came up
right if the game was started one particular way. Move it into the file the
engine already reads before anything touches the environment.
content/environ.ini <- scratchpad/pod/podprofile.ini, merged idempotently
between markers by scratchpad/pod/mergeprofile.ps1
Two gates were missing for that to be enough:
BT_FIT=1 the env spelling of -fit, so the borderless main view does not
depend on one launcher's command line (shortcut, scheduled
task and autostart all have to produce the same rig)
L4PLASMA= NONE / OFF / 0 -> no marquee at all. Leaving it unset does
NOT work: the GLASS profile force-defaults it to SCREEN, which
drops a desktop plasma window on the cab's glass. The boot
banner now reports the live state instead of always claiming
"plasma window".
Also lands the bring-up engine work this depended on: monitor:<name|index>
layout binding (device-bound, not pixel-bound -- desktop rects move when a
display re-enumerates), ",bare" implying frameless, rotation-aware radar
surface sizing, BT_GAUGE_SEC_ROT accepting 0-3 (it silently forced 3 for
anything but 1), 180-degree ExpandPlaneToBGRA, and the BT_POD_CHANMAP /
BT_POD_IDENT / BT_POD_CHANTEST identification gates.
Verified on the cart, build 4.11.813, launcher carrying none of it:
[boot] environ.ini: 9 setting(s) applied
[boot] platform profile: GLASS (PadRIO; plasma off [L4PLASMA])
[cockpit] -fit: borderless 800x600
[glasswin] radar rotation 0 (none)
... all three surfaces on their intended \.\DISPLAYn
No [plasmawin] line in an otherwise-logging run = the ctor never ran.
KB: pod-hardware.md gains the ALPHA-MR section (mapping, the two wiring
deviations, the frozen profile, the session-0 remote-work traps) and its RGB
SPLIT "OPEN: which way is the cart wired" is now SETTLED -- it is splitter
wired, the composite is what lit it. glass-cockpit.md documents monitor:
binding, BT_FIT and L4PLASMA=NONE.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Rw7No5wLTpkaUgA3ANbtZZ
|
||
|
|
db9ac947f7 |
Displays: on-screen cockpit buttons + desktop plasma + the glass preset (steps 2d/2e)
NEW gated TUs: L4PADPANEL (GDI top-level window, all-W APIs: the pod button banks -- upper/lower aux, 12 secondary, specials/hat/handle, 63 buttons -- clickable via PadRIO::SetScreenButton with lamp-lit faces from GetLampState, 10 Hz repaint; created by the PadRIO ctor on BT_PAD_PANEL=1) and L4PLASMAWIN (PlasmaWindow : Video8BitBuffered -- the gauge renderer draws the 128x32 plasma into its pixelBuffer through the SAME code path as the serial device; Update() blits orange-on-black at L4PLASMASCALE, default x4). Gated seams: L4GREND.cpp L4PLASMA=SCREEN branch; btl4main.cpp -platform glass preset (PAD,KEYBOARD + BT_DEV_GAUGES + SCREEN plasma + panel; env always overrides; non-glass builds log+fall back to DEV); run.cmd glass token. MFD surfaces need NO new code: the existing dock-bottom / BT_DEV_GAUGES_WINDOW=1 / BT_DEV_GAUGES_DOCK=1 modes are the display story. Verified live: -platform glass boots GLASS profile, panel + plasma windows up, pad detected, dev gauges awake, mission loop clean. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
dd27238ceb |
Gauges: the CLOSEOUT wave -- radar pips, Myomers dedup, attribute parity, ledger sweep (tasks #14-#17)
TASK #17 -- AUTHENTIC RADAR SYMBOLOGY (the cross-blip stand-in retired). The recon proved the 'missing pip raster set' never existed as BT game code: pips are the ENGINE's L4GaugeImage vector-stroke system (T0 source in tree, L4GAUIMA.cpp == FUN_0046f0c0 line-for-line), the 'pip table' is L4Warehouse:: gaugeImageBin keyed by Entity::resourceID, and BTL4.RES ships 110 type-0x12 shapes (every mech/vehicle/building/tree). The six btl4rdr stubs are wired to the real facilities: contacts draw their authentic model silhouettes with LOD selection, the target gets the binary's 4px-inflated box highlight, and player-name labels resolve via Mission::GetSmallNameBitmap (the prebuilt 64x16 egg rasters keyed by the player's bitmapindex). DECODED: the invented 'VideoObject' was Entity::owningPlayer all along (+0x190; nameID = playerBitmapIndex@0x1E0, target = BTPlayer::objectiveMech@0x284 -- new bridge BTPlayerObjectiveMechOf); the 'LabelledEntity' class is Landmark (cultural.h; label path dormant -- no landmark content ships, no runtime landmarkID writer). The L4GREND BT_DEV_GAUGES warehouse guard is removed (its AV had a different culprit, below); resource type 18 corrected to GaugeImageStream in decomp-reference (was mislabeled 'ModelList'). TASK #14 -- the Myomers ODR duplicate ELIMINATED: the powersub.cpp/hpp 'Myomers' (classID 0xBC3 -- actually Sensor) is retired whole; it duplicated ?DefaultData@Myomers@@ against the real class (dumpbin-verified) and /FORCE picked the winner by link order. The real Myomers (0xBC6) now chains PoweredSubsystem's handler set (ids 4-8) and publishes its SEVEN binary attributes (@00511588: SpeedEffect/Current/Recommended/Min/MaxSeekVoltage- Index/SeekVoltage/OutputVoltage) -- the old empty unchained index starved the Myomer engineering panel of every resolve. TASK #16 -- attribute parity: MechWeapon publishes the FULL binary table @0x511890 (11 entries; ids renumbered to binary truth -- the port aliases had squatted the binary's DistanceToTarget/TargetWithinRange ids; the streamed TriggerState 0x13 binding unchanged). Binary names resolved two TODO members: pipState -> estimatedReadyTime (attr 0x1A), and the EXT-model flag is the binary's RearFiring (0x1B). ThermalSight LightState published. HUD (offset conflicts) + missile-side tables (id encoding suspect) documented for a re-dump instead of publishing blind. THE CRASH THIS EXPOSED [T2, cdb-verified]: gotcha #11's dense-table gap is a LATENT AV, not a guaranteed one -- the old table's 0x0D..0x12 gap (task #5) survived on heap luck; the renumber reshuffled allocations and Find() AV'd on a garbage entryName in WeaponCluster's PercentDone resolve. Fixed with five named PAD entries (the mech.cpp attrPad idiom) + a static_assert locking the pad base to PoweredSubsystem::NextAttributeID. Gotcha #11 amended with the proof. TASK #15 -- stale-ledger sweep: GAUGE_COMPOSITE ('composite not yet built', Reservoir shadow, PlayerStatus/vehicleSubSystems 'remaining', valve-dormant- until-0xBD3, sensor guard, the superseded 'Heat MFD near-static' reframe -- all banner-corrected), gauges-hud frontmatter, L4VB16 + powersub comments. Verified live: 50/50 config attribute bindings resolve, 0 NULLs, 0 parse skips, mech spawns and simulates 31/31 subsystems, no cross-blip fallbacks, the pip cache fills through entity registration without the old guard. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
c13e72d0ba |
platform profile + gauge dev-composite (Milestone A: gauge renderer woken)
PLATFORM PROFILE (-platform pod|dev / BT_PLATFORM / run.cmd pod; default dev): an env-preset selector, NOT a code fork -- it picks which environment the existing video/gauge/input code reads. dev = single 800x600 window + keyboard (the working build); pod = RIO input + (on real hardware) the multi-surface gauges/MFDs, mirroring content/SETENV.BAT (the pod path -- FindBestAdapterIndices / SVGA16 -- is left untouched). The multi-surface needs the pod's 2 video cards, so -platform pod does NOT auto-enable L4GAUGE on a dev box (stays bootable, single-window). Also fixes a real engine bug: SVGA16::BuildWindows PostQuitMessage'd on a CreateDevice failure but fell through to a null-device deref (segfault) -- now breaks (inert on the pod). GAUGE DEV-COMPOSITE, Milestone A (option B; opt-in BT_DEV_GAUGES, default OFF): wake the (dormant) gauge renderer so its CPU-rastered pixelBuffer can later be composited into the dev window, WITHOUT touching the pod SVGA16 output path. SVGA16 does no per-surface D3D in this mode (a DevGaugeComposite() gate forces the no-surface path + short-circuits Update/Refresh). Waking the never-exercised gauge subsystem exposed 4 latent reconstruction bugs, each guarded: SVGA16::Update / Refresh (empty mSurfaces[]), LBE4ControlsManager::MakeLinkedLamp (NULL lamp manager), L4GaugeRenderer::NotifyOfNewInterestingEntity (garbage warehouse chain). It now boots STABLY; the gauge reconstruction is incomplete (shadowed lamp-manager + warehouse members) -- Milestone B (the composite pass) will reveal whether the content is real. See docs/GAUGE_COMPOSITE.md. Verified: default DEV un-regressed (combat DESTROYED, 0 crashes); pod path untouched; BT_DEV_GAUGES boots stable. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
7b7d465e5e |
Initial commit: bt411 -- standalone Windows BattleTech (Tesla 4.10 port)
Clean, self-contained extraction of the BattleTech-specific work from the
reverse-engineering workspace -- engine + game + content + build, with nothing
from Red Planet or the raw archive dumps. Builds green (Win32) and runs the
single-player drive->animate->target->fire->damage->destroy loop out of the box.
Layout:
engine/ MUNGA + MUNGA_L4 shared 2007 engine, carrying our BT render/loader
work (bgfload/L4D3D/L4VIDEO: BSL bit-slice decode, LOD/ground/shadow
models) + image codec; the minimal rp/ headers the audio HAL needs
game/ reconstructed BT logic + surviving-original BT source + fwd shims
+ WinMain launcher
content/ full runtime tree (BTL4.RES, VIDEO/, GAUGE/, AUDIO/, eggs, BTDPL.INI)
docs/ format specs + reconstruction ledgers
reference/ raw Ghidra pseudocode (recon source-of-truth) + decomp exporter
tools/ MP console emulator + map/resource scanners
One top-level CMake builds munga_engine lib + bt410_l4 game lib + btl4.exe.
All paths relativized (186 fwd shims + ~437 CMake abs paths -> repo-relative);
DXSDK is the one external, overridable via -DDXSDK. Verified: builds to a
byte-identical 2.27MB exe and runs combat (TARGET DESTROYED, 0 crashes) against
the bundled content.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|