- manifest410.py: monotone-DP TU labeling (data-cluster affinity + CLASSMAP
seeds + recon @addr soft votes) replaces naive fill; BT region = 917 fn /
~230 KB, extents match every independently-known TU boundary.
- source-completeness: ROUTE A CLOSED (Nick holds no further assets);
toolchain = BC++ 4.52 PROVEN by CW32.LIB byte-match, archived at
TeslaRel410/BORLAND; OPT.MAK = the shipped binary's exact recipe; extender
corrected to Borland PowerPack DPMI32 (was "Phar Lap TNT"); "all BT headers
survive" corrected (17/36 bt-side; mech.hpp etc. reconstruction-only);
engine gaps enumerated (vdata.hpp first, back-dated from BT412).
- phases/phase-03: rounds 1-3 of the source410 campaign - 6/10 surviving
originals compile clean under BC4.52; console wire IDs recovered from the
binary ctors (Killed=9 Damaged=10 ScoreUpdate=13 DWH=15 [T1], TeamScore
guessed 12 [T4] - answers the TeslaSuite console-port spec's open item);
round-3 finding: MECH.HPP is the capstone grown with the mech TU
reconstructions, BTREG.CPP green = the header-family milestone.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The MadCat torso twists, the view turns with it, and targeting follows.
Three reconstruction fronts closed:
THE ELECTRICAL WATCHDOG CHAIN (why the torso never powered up):
- PowerWatcher::UpdateWatch reconstructed (@004b181c, the REAL registered
Performance -- PTR @0050f5fc; Ghidra missed the fn start): the watchdog
MIRRORS the watched subsystem's electrical level (+0x278), brownout
downgrade when gen output <= minVoltage% x rated. @004b1804 relabeled
ResetToInitialState (slot 10) -- the old "Simulation" tag was wrong.
- The factory watcher-CONNECT pass reconstructed (vtable slot +0x38,
@004aee2c/@004b1a40 byte-identical, recovered from raw exe bytes):
watchedLink.Add(roster[watchedSubsystem]) on the master node. Was the
SubProxy::Start() no-op -- every watchdog sat at 0 forever.
- MinVoltageScale = 0.01 (a 10-byte x87 literal @0x4b1924; was 1.0f =
permanent brownout) and PowerWatcher's Derivation chains its REAL base
HeatWatcher (the HeatableSubsystem stand-in broke IsDerivedFrom for the
whole Torso/Searchlight/ThermalSight family).
- KB correction swept: derivation tag 0x50e604 = HEATWATCHER (not
"HeatSink"); the btl4gaug heat-widget gate now tests it via the
BTIsHeatWatcher bridge.
THE CROSSHAIR (task #58 forensics, 6-agent workflow + live probes):
- The VIEW is TORSO-MOUNTED: jointtorso -> jointeye -> siteeyepoint in
every twist-capable .SKL; the camera + canopy ride the same hinge
subtree through HingeRenderable's live matrix-stack compose -- ALREADY
WORKING in the port. The crosshair stays screen-centered (center IS
the boresight); the twist reads on the tape carets/compass/radar.
- The real bug was the port's gBTAimX = tan(twist) slew (the falsified
"body-mounted view" model): the camera already carried the twist, so
the crosshair counter-slid to hull-forward and the fire ray with it.
Deleted; the pick ray inherits the twist from the yawing eye basis.
- Two instrumentation traps documented (chase-eye-as-default-camera,
BT_FORCE_TORSO clobbering real joints -> the hook now only fills
unresolved ones); an over-correcting explicit eye compose was added on
those false readings and retired the same day.
CONTROLS + REPLICATION:
- Q/E spring-center on release (the axis is a twist-RATE demand; the old
hold-deflection model drifted forever); X also zeroes the axis and
pulses the authentic torso Recenter (@004b6918). M cycles control
mode via the real CycleControlMode body.
- Torso update-record DIRECTION fixed: engine truth is Write=serialize /
Read=apply; @004b6a78 is the READ (was mislabeled Write) and the
missing WRITE @004b6a1c recovered from raw disasm (recordLength 0x1C,
twist/vel/rate at +0x10/14/18) -- kills the replicant's 0xCDCDCDCD
-140-degree ghost twist.
- Marching-ghost desync: 4 Standing-case guards zero stale reverse
cycleSpeed (negative cadence passed the <= ZeroSpeed stop gate).
- Kill credit rerouted to the OBSERVED killer (lastInflictingID ->
killer's player link) -- kills count, target K/D populates.
KB: subsystems.md (watcher chain), multiplayer.md (record direction),
combat-damage.md + gauges-hud.md + cockpit-view.md (torso-mounted view
re-correction), decomp-reference.md (new addresses + tag fix),
open-questions.md (dead capability-roster loops 2-4, snapshot CD read).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- dpl2d API fully recovered from the binary recorders (@487f34-488630):
opcode model (points/lines/polyline/circle/color/width/matrix/push-pop),
CallList = INLINE include (state persists to caller), centered coordinate
frame (unit = half viewport height). game/reconstructed/dpl2d.cpp rework.
- BTReticleRenderable ctor @004cc40c transcribed with the authentic
calibration (originX .35, originY .25, scaleY .5, 0..1200m right range
ladder, bottom heading tape, FUN_004cd938 tick ladders, lock rings,
turn arrows); range caret slides from the live target range fed by the
mech4 targeting step (BTSetHudTargetRange).
- Weapon pips: the binary gate is IsDerivedFrom(0x511830 =
MechWeapon::ClassDerivations) [T1: part_014.c:5386 hard-aborts on missing
weapon attrs; part_012 counts + roster ORs capabilityFlags@+0x334] so ALL
7 BLH weapons register (3 lasers + 2 PPCs + 2 MissileLaunchers). Pip A
(lit, authored PipColor) on TargetWithinRange, else dark ring B.
- AddWeapon @004cdac0 store map corrected to the verified order
(part_014.c:4827-4837); both state attrs are literally named
"SimulationState" (strings @51d526/51d577) -> weapon simulationState.
- Mech roster this[0x1ef] renamed poweredSubsystems -> weaponRoster
(0x511830 is MechWeapon, not PoweredSubsystem=0x50f4bc); derivation-tag
table added to context/decomp-reference.md.
- Draw hook BTDrawReticle after the 3D scene, cockpit view only. Binary
Execute @004cdcf0 is an un-exported gap -> Draw dynamics [T3], tracked
in context/open-questions.md with the blx_cop canopy + PNAME pip meshes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every dpl2d_ recorder in the binary self-identifies via its debug-name string
(part_010.c 0x487f34..0x4888c0) -- the complete API + opcode map is recorded
in phases/phase-02-dpl2d-reticle.md: point sets (2/3), closed polylines (4/5),
open line strips (6/7), AddPoint (8), AddCircle (9), SetColor (0xF),
Set/ConcatMatrix (0x10/0x11, 2x3 affine), Push/PopState (0x12/0x13),
SetLineWidth (0x15), CallDisplayList (nested glyphs), FullScreenClipRegion.
dpl2d.cpp reworked to that model: command-stream recorder (open-primitive
vertex runs, state commands, nested list calls) + a recursive ExecuteList
rasteriser (XYZRHW points/strips/loops/circles, 2x3 transform + state stacks,
save/restore). CORRECTION: the old "PushMatrix/MoveTo/PopMatrix" trio was a
misreading of OpenPolypoint/AddPoint/ClosePolypoint ("draw a point") -- kept
as aliases mapping to the true semantics.
Reticle findings recorded: the ctor (@004cc40c) builds ~15 display lists (the
dotted-cross reticle, tick ladders via FUN_004cd938, side arrows, arcs) plus a
3D marker chain and the PNAME1-8.bgf pip meshes (all ship). Next: transcribe
ctor+Execute, wire the 1996 caller's AddWeapon arguments, hook the draw.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
CydandClaude Fable 5