8c612e4e18d078ecb8e2712aa5b48736dc99196f
1
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Joe DiPrimaandClaude Opus 5
|
7b003243ae |
#146 respawn: release the DESKTOP throttle -- and close #137, which was never a bug
#137 ("respawn came back with MYOMERS heat MAXED", Oracle; "overheating generator D", Sauron) sent us through a full two-sided audit of Mech::Reset and the whole RTIS chain. Both sides were correct. The answer was in the field log all along, one line after the reset: [respawn] Mech::Reset 3:30 healed+moved to (...) alive=1 [techstat] ... every live condition CLEARED [techstat] Myomers condition 3 SET <- Overheating, immediately [mppr] in thr=1 -> ... [gaitSM] cycleSpeed=14.6 state=12 <- already RUNNING [techstat] Condenser5 condition 3 SET <- "dumping into coolant loop 5" [techstat] GeneratorD condition 3 SET <- Sauron's generator D The mech respawns STILL UNDER POWER and earns the heat honestly. Two facts close it: 1. condition 3 is an OPERATING flag, not an alarm. Census over one match: LLaser_2 33 SET / 33 CLEARED, LLaser_1 31/31, SRM4 26/26, PPC_2 18/18 -- every volley trips it and clears it. EVERY subsystem is balanced (GeneratorD 5/4, Myomers 5/4, Condenser5 1/1; the extra SET is only the log ending mid-heat). cond 6 BadPower behaves the same (Myomers 8/8). Nothing latches. A post-respawn SET is not evidence of anything. 2. Mech::Reset's subsystem loop starts at index 2 and the ControlsMapper is index 0, so the throttle is never reset -- and the BINARY does the same. That is right for a pod: the throttle is a PHYSICAL lever still under the pilot's hand. Respawning under power is authentic and stays. Oracle's read that the myomer heat rate "felt right" was correct. WHAT IS a real defect (#146), desktop only: the glass bridge merely EMULATES that lever, with the static ramp accumulator sLever (mech4.cpp:3250) zeroed ONLY by the X all-stop and a direction-crossing snap. A pad/keyboard pilot is physically holding nothing and cannot see the lever, so they respawned at speed for no reason they could perceive -- and ate the heat load above. The Thrustmaster/RIO path was never affected: InterpretControls (@004d2150) rebuilds throttlePosition every frame from the databound throttleForward. Fix: queue the existing all-stop at Mech::Reset, reusing the proven path (it already clears the zero-crossing detent too). LOCAL VIEWPOINT MECH ONLY -- gBTDrive is the local bridge's state and Reset also runs for replicants, so an ungated write would all-stop the player whenever a REMOTE mech respawned. Pod-safe besides: with a RIO present the key bridge is off and gBTDrive.throttle is never read. BT_NO_RESPAWN_THROTTLE_RELEASE=1 reverts. Benched 2-node (scratchpad/night13/throttlerespawn.sh): the release fires 1:1 with local respawns on both nodes independently (A 2/2, B 1/1) and never spuriously. HONEST LIMIT: the viewpoint gate was NOT stressed -- B ran Mech::Reset 0 times for A's mech, so the remote-respawn path never fired. The gate is correct by construction (the isPlayerMech idiom), not proven. BT_AUTODRIVE cannot test the lever itself (forced mode reads forcedThrottle, never sLever), and the zeroing path is the X button, proven in the field. Also keeps BTReportHeatAtReset (heat.cpp, BT_HEAT_LOG): the [heat-t] census runs on a 5s timer, far too coarse to sample AT the reset. It is what proved every roster subsystem including all six Condensers sits at T=77 start=77, and it corrected an earlier false negative from filtering on IsDerivedFrom(HeatSink). KB: context/decomp-reference.md gains the routine/self-clearing condition semantics + this post-mortem, so it is not re-chased; cross-ref in context/gauges-hud.md. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_018SgmXGNMXavXiafKXf9MDC |