Ported RP412's bindings design and made it the DEFAULT: the letter and number
rows are the MFD button banks laid out WHERE THEY SIT ON THE PANEL, flight
moves to the numpad so the board stays free, F1-F12 are the map's two columns,
and G/B stay unbound as the physical gap between the lower clusters. Expressed
in BT's OWN grammar (slew/deflect/set, the Turn channel) -- bindings.txt is a
documented compatibility surface and was not touched.
Coverage: 61 of 72 addresses on the keyboard, and the 11 absent ones are
exactly those the pod never wired (0x16/0x17/0x1E/0x1F column gaps, 0x38-0x3E
intercom/door). All 72 stay clickable on the panel.
It lands on BT's addresses unreasonably well: 1-4 + QWER are the ENTIRE coolant
system (Condensers 1-6, flush, balance), F6/F7 the display and control-mode
cycles, F9-F12 Generators A-D, F4 the crouch button reconstructed earlier
today.
THE DELIBERATE COST. A bound key is removed from the authentic 1995
typed-hotkey channel so it cannot double-dispatch, and this board binds nearly
everything -- so 5 (Quad page), z (Eng1), t/y/u/i/o (pilot select) and +/-
(target zoom) are given up. Unbind a key to get its 1995 meaning back.
Documented in the file header, the markdown and the page.
NEW RULE: A BINDINGS ROW WINS OVER A BUILT-IN CONVENIENCE KEY
(PadRIO::KeyHasBinding). V and J/K/L are board buttons now, and those polls
read GetAsyncKeyState directly -- without this they would have fired BOTH the
button and the built-in. View toggle lives on BACKTICK alone.
CONTROLS.MAP rewritten to mirror the board so glass/pod/dev still feel
identical (the 2026-07-21 settlement): 90 bindings, 0 parse complaints.
HAT LABELS CORRECTED [T1]. INPUT_PATH_AUDIT flagged 0x41-0x44 and was right.
Settled from the streamed mapping (BT_CTRLMAP_LOG): elem 66 -> subsys 17
attrID 14, i.e. 0x42 is the TORSO subsystem, not a look; 0x44/0x43/0x41 are the
mapper's LookLeft/LookRight/LookBehind (attrID 10/11/12). The .RES has no
"TORSO CENTER" string -- its names are LookBehind/Down/Forward/Left/Right -- so
the audit's wording was loose but its substance correct. Swept L4GLASSWIN,
L4PADPANEL and L4VB16.
docs/CONTROLS.html: interactive keyboard (hover a key for its address and
meaning, MFD clusters outlined), pad diagram, panel map, the under-glass
press-target figure, radar placement thumbnails and the environ.ini table --
modelled on RP412's page, rewritten for BT's addresses and hazards. mkdist
wraps the fragment in a doctype/charset shell and ships it beside CONTROLS.txt.
Verified: bindings.txt regenerates and loads (74 keys, 0 errors); CONTROLS.MAP
90 bindings, 0 errors; 72/72 panel addresses still dispatch; surround /
exploded / dock / pod / dev boot and simulate with zero faults.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Replicates the RP412 cockpit line into BT411's own architecture -- porting the
geometry and keeping our renderers, so BT_SHOT single-frame verification stays
intact.
MODE RESOLVER. Where the secondary displays go was decided in TWO places with
duplicated precedence, and the boot banner read NEITHER -- it announced
"per-display cockpit windows" for every glass boot, surround included. The
split had also broken BT_COCKPIT=0: documented as the dock-bottom opt-out, the
profile block converted it to BT_GLASS_PANELS=1, so the docked strip was
UNREACHABLE under the glass profile. One resolver now, consumed by the banner,
the pad-panel decision and the window sizing; BT_GLASS_PANELS is explicit-only;
dock/window modes auto-raise BT_PAD_PANEL so the button field always has a home.
L4RIOBANK -- one button geometry. Both renderers carried their own copy and had
drifted: an MFD button was 156x138 reaching under the glass in the exploded
window and a 76x24 sliver entirely OUTSIDE the glass in the surround. One
module owns it now, both are consumers, placement stays per-renderer. The pod's
under-glass rule (RP412 L4MFDVIEW): reach half the glass in behind the display,
leave a lamp strip clearing the edge, paint buttons first and imagery over --
so the lamp reads as a bar and practically the whole display is the press
target. The strip scales off the display's SHORT axis (the map is portrait)
with a readable floor. Retired L4GLASSWIN's three local placers and seven
layout constants.
LAMP FLASH DECODE was wrong [T1]. BTLampBrightnessOf returned max(state1,
state2) and blanked on the alternate phase; RIO::LampState (L4RIO.h [T0]) says
solid shows state 1 and flashing ALTERNATES the two. Agrees only when one state
is Off -- true for the Panic lamp, which is why it survived -- but L4LAMP.cpp:252
commands flashFast + state1Dim + state2Bright, a dim->bright pulse that rendered
as a hard bright->off blink. Three copies existed (l4vb16.h, L4GLASSWIN,
L4PADPANEL), all three wrong; the two locals now forward to the one fixed inline.
THE COCKPIT SCALES. The fixed canvas was stretched into whatever the client
area was, so a window dragged to a different shape squashed the instruments (the
projection was aspect-corrected in task #20; the panels never were). Now one
uniform scale, centred, leftover black. D3D9 applies it as a Present
destination rect, which DISCARD forbids -- so the WINDOWED swap effect becomes
COPY when the surround is up and multisampling is off. The click mapping had to
follow (mapping against the full client drifts the hit test off every button by
the bar width), as did the world aspect (under a uniform scale it is the view
rect's own). -fit / -windowed-fullscreen: borderless over the monitor.
- ordering trap: the first WM_SIZE beats the device, so a -fit boot logged
aspect=3.14 and applied it on frame 1. The letterbox INTENT is decided in
btl4main; L4VIDEO only confirms or withdraws it.
PLAYER-TUNABLE DISPLAYS. BT_MFD_SCALE (+ _UL/_UC/_UR/_LL/_LR), BT_RADAR_SCALE,
BT_RADAR_POS (CENTER/LEFT/RIGHT/MIDLEFT/MIDRIGHT). The surround BANDS derive
from the resolved sizes -- that is why the sizes could not stay constants: the
band a display hangs in has to grow with it or the canvas clips it. 100%
reproduces the historical L276 R276 T223 B336 exactly. A corner map goes flush
to the CANVAS edge and the lower MFD slides beside it (measuring off the view
edge overlapped them by 232px).
MAP LEGEND GRID -- measured, not inherited. scratchpad/measurelegend.py over a
native capture: top 3, cell 102, pitch 107 of 640. RP412's map is 13 + 6x102 @
105 -- same cell height, different top and pitch, so its numbers do NOT
transfer. Our old even division had the pitch right by luck and sat 3px high of
the labels.
environ.ini. It was read ~300 lines into WinMain, AFTER the platform-profile
block had run its getenv()s -- so every setting the profile reads was silently
ignored FROM THE FILE and only worked as a real env var. It also putenv()'d
comments verbatim. Now loaded immediately after the first-breath line, comments
skipped, the real environment WINS over the file, and a fully documented default
is written on first run (the bindings.txt convention: untracked, so
extract-over-top never clobbers a player's settings).
VERIFICATION HARNESS (new, reusable): BT_RIOBANK_LOG=1 dumps every bank;
checkbank.py proves no address is SHADOWED (an address whose rect is covered by
earlier buttons is dead however big it looks -- the overlapping under-glass banks
make that a live hazard); clickbank.py posts a real click at every button centre.
Verified: 72/72 placed, 0 shadowed, 72/72 dispatched in BOTH modes, after a
resize, at 150%/135%, and at 75%+BOTTOMRIGHT; wide/tall drags and -fit
undistorted on a 3440x1440; exploded/dock/pod/dev un-regressed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Human-verified (epilectrik, live): the panel is steady on the SAME monitor
as the game. Two root causes, both cured:
1. D3D-vs-GDI presentation contention -- the game's ~60Hz presents fought
the panel's GDI redraws on a shared display (single-monitor users had
no escape; moving the panel to another monitor cleaned it, the tell).
WS_EX_LAYERED + opaque SetLayeredWindowAttributes: DWM now composites
the panel independently of the D3D swap chain.
2. Sampling beat -- the 100ms repaint timer sampled the authentic RIO lamp
flash half-periods (125/250/500ms) into an irregular 'broken lamp'
strobe. Timer -> 62ms (~half the fastest half-period): flashing lamps
now blink at their even, authored tempo.
(Stacked on the earlier double-buffer/erase-suppression cleanup.)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The panel repainted control-by-control straight onto the window DC on a
100ms timer. Compose to a memory bitmap + single BitBlt; erase suppressed.
NOT the whole fix: the reporter's flicker is monitor-dependent (clean on a
display without the game window) = D3D-vs-GDI presentation contention, plus
a 100ms-timer-vs-125ms-lamp-flash sampling beat -- directions filed on #13.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
First dist feedback ('there is no glass panel'): both windows opened at the
top-left with no-activate and the game window then covered them. The pod's
physical panel is always visible -- so is the glass one now: the button
panel parks at the screen's right edge, the plasma bottom-right, both
WS_EX_TOPMOST. Verified live: panel left=2616 top=12 topmost, plasma
bottom-right topmost, game window below.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Per Cyd: the two 4x4 hex keypads leave the glass panel (engine keypad units
stay reachable via bindings.txt); the four board columns (Thr/Sec/Scr/Joy)
move to the center between the lower MFD stacks and rise into the vacated
internal-keypad space -- 72 controls, ~5 rows shorter.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Per Cyd: the on-screen panel now mirrors vRIO (C:\VWE\vrio -- CockpitLayout.cs
+ PanelCanvas.cs, itself the RIOJoy profile-editor layout from the original
Win32 RIO mockup): five 4x2 MFD clusters (addresses descending), four 1x8
board columns (Throttle/Secondary/Screen/Joystick), the two 4x4 hex keypads
(0x50/0x60 -- cells emit real keypad KeyEvents: internal=pilot unit, external=
operator unit), physical names (Panic/Main/Hat*/Pinky...), vRIO colors: red
lamp cells + yellow Secondary/Screen + neutral-blue keypads, flash half-
periods 500/250/125ms, right-click latch (gold outline). 104 controls.
PlasmaWindow: the gauge renderer writes the 128x32 buffer TOP-DOWN -- the
bottom-up flip rendered the marquee upside down (user-reported); copy straight.
Button-trap guard (the e2c21c4 pattern): the authentic base
ConfigureMappableMessageHandler FAIL trap is abort() under DEBUGOFF -- any
aux/zoom button without its L4 override reconstructed KILLED the game on
press. Default now: loud [FAIL] log + ignore; BT_BUTTON_TRAP=1 restores the
hard trap. Verified live: synthetic click on a Secondary cell -> 2 [FAIL]
lines (press+release through panel->PadRIO->ProcessRIOEvent->streamed
mapping), game survives and keeps ticking.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
NEW gated TUs: L4PADPANEL (GDI top-level window, all-W APIs: the pod button
banks -- upper/lower aux, 12 secondary, specials/hat/handle, 63 buttons --
clickable via PadRIO::SetScreenButton with lamp-lit faces from GetLampState,
10 Hz repaint; created by the PadRIO ctor on BT_PAD_PANEL=1) and L4PLASMAWIN
(PlasmaWindow : Video8BitBuffered -- the gauge renderer draws the 128x32
plasma into its pixelBuffer through the SAME code path as the serial device;
Update() blits orange-on-black at L4PLASMASCALE, default x4). Gated seams:
L4GREND.cpp L4PLASMA=SCREEN branch; btl4main.cpp -platform glass preset
(PAD,KEYBOARD + BT_DEV_GAUGES + SCREEN plasma + panel; env always overrides;
non-glass builds log+fall back to DEV); run.cmd glass token. MFD surfaces
need NO new code: the existing dock-bottom / BT_DEV_GAUGES_WINDOW=1 /
BT_DEV_GAUGES_DOCK=1 modes are the display story.
Verified live: -platform glass boots GLASS profile, panel + plasma windows
up, pad detected, dev gauges awake, mission loop clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
CydandClaude Opus 5