f5e0ffcd1476ce4fdff0cd9355302b531b7da62d
20
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 arcattackandClaude Opus 4.8
|
21b2bfc1c9 |
Issue #21: overcharge-bricked weapons -- latent ARCADE bug, deliberate divergence
The tester's ER small laser died permanently (recharge arc + ready dot dark, no fire) after idle seek-gear clicking. Root cause, byte-verified + headless- reproduced -- a latent bug in the SHIPPED ARCADE BINARY: - The charge integrates toward the GENERATOR voltage (@004ba838), not the gear target; "full" is only detected inside the +-1% snap window around seekVoltage[idx] (@004ba738), and overcharge reads ZERO (the byte-verified _DAT_004ba830 = 0.0 clamp). - Toggle seek while a charge is in flight and the level can land ABOVE the new gear's window: rechargeLevel pins to 0, the ==1.0 Loaded test can never fire, and charging continues to the generator ceiling where EVERY gear reads overcharged. Permanent brick; generator reselect cannot help. - The arcade dodged it by circumstance (locked 60 fps, rare seek use); the port's clickable seek button hits it in seconds of casual clicking. Fix (marked divergence in the Loading tick): overcharge counts as fully charged -> Loaded. The arcade's own discharge algebra says full == the gear's seek voltage, so an overcharged weapon IS full. Verified: the same 2.5-min BT_SEEKTEST abuse that bricked the laser pre-fix now fires 38 overcharge rescues and ends Loaded/pct=1. [seek] log now also prints the per-gear voltage table + gen voltages (diagnosis instrumentation). Ruled out on the way (documented in #21): overheat fuse (no firing occurred; a 4-min autofire+coolant-abuse run wouldn't fuse), generator detach (gen cycling + healthy siblings), seek-table corruption (table {6000,7000,8000, 9900} healthy). KB: decomp-reference.md records the arcade-latent-bug analysis. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
4aab10ba89 |
Issue #19: wire ToggleSeekVoltage (Myomers id 9 + energy weapons id 0xb)
Root cause -- NOT issue #2 (the experience mis-seed pins everyone to VETERAN, which PASSES the novice lockout; the gates were never the blocker). Two unwired handlers, the same silent-swallow pattern ToggleCooling had (Receiver::Receive -> NullHandler for an unregistered id): - Myomers (handler table @0x51158C {9,"ToggleSeekVoltage"@004b8a48}): the reconstruction had an EMPTY stub (the address falls in the untagged decomp gap 0x4b8837..0x4b8a8c) and never registered the id. Body reconstructed faithfully from the raw disassembly (tools/disas2.py 0x4b8a48): novice lockout (@4ac9c8) -> heat-model gate (@4ad7d4) -> press-only (msg+0xc>0) -> currentSeekVoltageIndex@0x320 = (idx+1) % (maxSeekVoltageIndex@0x32C + 1). Modulo from zero, min index not consulted, no ResetFiringState. - Emitter (energy-weapon table @0x511DB8 {0xb,"ToggleSeekVoltage"@004ba478}): the faithful body already existed as the orphaned "AdvanceSeekVoltage" (ZERO callers) -- converted to the registered message handler (same guards; cycle + ResetFiringState when not wrapping, disasm re-verified). PPC and GaussRifle copy-inherit the set; the ammo branch keeps its own id 0xb == EjectAmmo (still unwired, tracked separately). Both registered via MESSAGE_ENTRY on top of the inherited chains. Permanent diagnostics: [seek] gear log (BT_SEEK_LOG) + BT_SEEKTEST scripted dispatch harness (mech4.cpp, the cooltoggle pattern). VERIFIED headless: [seek] Myomers -> 3,0,1,2,3... and [seek] PPC_1 -> 3,0,1,2,3... (modulo-4 wrap, matching the binary's arithmetic). Awaiting the tester's live ADV-mode confirmation for the real MFD button route (the routing layer is the same streamed-EventMapping path ToggleCooling verified). KB: decomp-reference.md message-table rows marked wired. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
d7158f1f82 |
Experience levels WIRED: the egg field drives the simulation tier (Gitea #2)
BTPlayer's master ctor now seeds the flag block from btMission->ExperienceLevel() + AdvancedDamageOn() (accessors from the SURVIVED 1995 BTMSSN.HPP [T0]) instead of the NULL-stubbed scenario role -- the egg experience knob works for the first time. Both switch slot errors fixed vs the binary @4c0bc8; phantom btMission duplicate member removed (+0x1f8 IS Player::playerMission). SEVEN gate stubs unified onto the real flags (two found empirically): HeatModelActive, OwnerAdvancedDamage, LiveFireEnabled, ControlsAllowLights, powersub @4b0efc, emitter's file-local FUN_004ad7d4 + FUN_004ac9c8 stubs. FUN_004ac9c8 family swept (incl. a live raw-offset databinding trap in MechSubsystem::IsDamaged). Flag block renamed to its true semantics (simLive/heatModelOn/...), scoring-era names kept as comments. Includes the #5 [aud-tail] diag in emitter.cpp. ALL 19 shipped eggs say experience=expert -> default behavior UNCHANGED (per-tier verified: novice/standard = no heat/jams, authentic; veteran/ expert = today's exact behavior). Real delta: egg advancedDamage=1 now reaches player+0x264/0x268 (was hardwired 0). Follow-up flagged: the glass FE defaults empty experience to veteran (one tier below shipped). Awaiting human verification. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
2edde29671 |
Fix 1 (Gitea #12): disasm-exact ProjectileWeaponSimulation @004bbd04 + the dirty-bit sweep
Replace the RivetGun-modeled ProjectileWeaponSimulation body with the fully recovered binary machine (capstone disasm, every branch address-cited): - gate 1 @4bbd36: simulationState@0x40==1 (destroyed) || heatAlarm==FailureHeat || owner disabled -> recoil=rechargeRate + alarm 7 (was: simulationFlags==1) - gate 2 @4bbd71: bin alarm 2/3 or bin destroyed -> alarm 7 re-pinned per frame - Loaded @4bbec2: DENIED shots (viewFireEnable off / no owner target) blip SetLevel(4);SetLevel(2) and STAY LOADED, no ammo pull (the old FireWeapon early-returns under an unconditionally-cycling caller faked a full firing pip cycle -- the "missiles cycle but never launch" incident mechanic); the ammo pull is bin->FeedAmmo @4bbee6 in the CALLER; both updateModel|=1 marks (@4bbf05/@4bbf4c = ForceUpdate) bracket FireWeapon; recoil set @4bbf51 - Loading @4bbdd2: recoil bleeds ONLY here at electrical Ready and CLAMPS at 0 (it ran to -114 before); bin Loaded -> weapon Loaded - 7 @4bbe4d: binary-faithful roach motel (re-asserted unconditionally; recovery = ResetToInitialState only) - slot 17 @004b9c9c reconstructed as MechWeapon::ComputeOutputVoltage (rechargeLevel=(rechargeRate-recoil)/rechargeRate, Emitter overrides with @4ba738) and called from Loading/7 -- the launcher recharge dial ANIMATES (the old "authentically static" claim was wrong) FireWeapon bodies stripped to heat+spawn only per @004bcc60 (no view gate, no ConsumeRound, no recoil); ConsumeRound retired (not a binary method). Gotcha #20 sweep (all sites disasm-verified): simulationFlags|=0x1 == engine DelayWatchersFlag (audio watchers muted forever) removed everywhere -- projweap/mislanch fire marks, ProjectileWeapon::ResetToInitialState (@4bbb47 = updateModel|=1); Emitter::SetDirty retired and split per binary site into ForceUpdate() (@4bafaa/@4ba55d) vs ExecuteOnUpdate() (@4ba99a/@4ba943); Emitter fault gate GetFlags()==1 -> simulationState==1 (@4baab9). AmmoBin::GetAmmoState() accessor added (named-member read of ammoAlarm@0x1A8). BT_LOOK_TEST=<frame> scripted verify added (mech4.cpp): holds the rear-view button 300f on/300f off to drive viewFireEnable headlessly. Verified solo ARENA1 (bhk1, autofire): 54-60 [projectile] PUSH + impact smoke; look-back denial window = trigger pulses, state stays 2, zero launches, resumes on release; enemy (disabled) mech launchers pinned 7 + full recoil; STREAK-6 recharge dial sweeps across BT_SHOT frames; lasers fire throughout; zero gauge faults. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
63b168cb92 |
SeekVoltageGraph: full reconstruction -- the eng-page POWER graph + top-box eraser (Gitea #11)
The #10 audit's one WRONG: the port Execute was a bring-up no-op, so the emitter/myomer engineering pages never erased their top data box -> stale sibling-page ghosts on the shared Eng bit-plane (SYSTEM 10 PPC showing the Streak ammo box, etc). Full faithful widget landed: - btl4gau2: ctor/BecameActive/Execute/clear/ticks/cursor recovered from the capstone disasm of @004c6798/@004c6920/@004c6934/@004c6be4/@004c6c30/ @004c6c6c (Ghidra dropped every x87 arg). Plot: v=0..12000 step 1200, x=Round(response(v)*230), y=Round(v*(1/12000)*187) (ld80 @004c6bd0/@004c6d74 = exactly 1/12000); change-test samples the response at 12000V vs the 9999 activation sentinel; XOR op for tick/cursor move-by-redraw; destroyed branch centres edestryd.pcc and revives via own vtbl+0xC (BecameActive, slot 3 of PTR_0051a1fc -- vtable-dump verified). - The vtbl+0x3C sampler identified from the binary vtables: Emitter slot 15 @004bb42c = sqrt(P(v)/2.0e8), P @004bb3f4 = damageFraction*v^2*0.5* energyCoefficient; Myomers slot 15 @004b8f94 = sqrt(AvailableOutput(v)*3.6/ 350). FUN_004dd138 == sqrt (part_015.c:4026): myomers' fabs reading corrected, GetSpeedReading renamed SeekVoltageResponse. Port dispatch via complete-type bridges BTSeekVoltageSample/BTMyomersSeekSample + BTSubsystemDestroyed (databinding rule). - Emitter's AUTHENTIC attribute table recovered (binary @0x511dd4, ids 0x1D-0x25) and published: Laser*/Seek*/OutputVoltage@0x414 (currentLevel, RAW volts -- the live-cursor feed). Field renames per the table: 0x3F8 minSeekVoltageIndex / 0x3FC maxSeekVoltageIndex (static_assert-locked). The MechWeapon 0x1D OutputVoltage PORT ALIAS retired (binary table ends 0x1C; Find walks lowest-id-first, the alias shadowed the authentic row). PPC::DefaultData -> Emitter::GetAttributeIndex(). - mech4: BT_PRESET_HOLD=<n> (freeze the #9 preset cycler after n pulses) for steady-state pixel verification; BT_SEEK_LOG diag. Verified live (BLH, autofire): both #10 repro pairs held ghost-free for minutes (SYS09->SYS10 PPC, SYS02->SYS04 ERMed, SYS05->SYS06 Myomers); curves draw with live cursors; one replot per activation; quad panels/J-K-L/sec panel un-regressed. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
38febae36b |
Rear-fire + look views (task #68): the pod's rear arsenal reconstructed
The user's tip ("some mechs actually do fire backward") checks out end to
end. Binary ground truth [T1]:
- weapon+0x334 (attr 0x1B "RearFiring"): the ctor tests the MOUNT SEGMENT's
page name for the marker 'b' (@0x511aa2, part_013.c:6913-6930) -- the back
gun ports sitelbgunport/siterbgunport. The old reading ("EXT in the
weapon model name") was a double misread (wrong string, wrong name).
- mech+0x410 (attr id 50 "RearFiring"; the old `stateFlags` label): the ctor
ORs every weapon's flag (part_012.c:10220) -- "carries a rear arsenal".
- The mapper's five-state LOOK machine (part_013.c:396-459): on a state
change it re-aims the eyepoint (mech+0x360 = EyepointRotation -- consumed
by DPLEyeRenderable, already live in the port) and re-arms each weapon's
viewFireEnable(+0x3E0): FORWARD view = the non-rear weapons, LOOK-BACK
(yaw pi + lookBackAngle pitch) = the REAR-mounted ones, side/down = none.
+0x3E0 is the same flag the emitter's Loaded->Firing gate reads (the old
`useConfiguredPip` label) -- pips and fire permission both follow the view.
Port: rearFiring derived from the mount segment name (BTWeaponMountIsRear);
mech rearFiring ORed in the roster pass (the old SubProxy::IsDerivedFrom
stub returned 0 -- that loop never ran; now bridged through
BTWeaponIsRearFiring, which also fixes the weaponRoster fill); the look
commit is LIVE (BTCommitLookState: eyepoint EulerAngles from the authored
per-mech look angles -- now real members, were Wword scratch parks -- +
per-weapon view enables); MissileLauncher/ProjectileWeapon FireWeapon gate
on viewFireEnable like the emitter; RearFiring attrs (mech + weapon) bind
real members. Keyboard: HOLD 'V' = the pod's rear-view button.
Live-verified on the default blackhawk: ERMLaser_2 -> siterbgunport rear=1,
ERMLaser_3 -> sitelbgunport rear=1, PPCs/SRMs/torso mounts forward -- the
blackhawk authors TWO REAR LASERS (owens also has back ports). [rearfire]
trace under BT_PROJ_LOG.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 4.8
|
aab7a8a137 |
Combat: FIX weapon effectiveRange -- it degraded with heatLoad, not host-zone damage (task #50)
MechWeapon::UpdateTargeting computed effectiveRange = (1 - heatLoad) * weaponRange, reading the weapon's own inherited HeatableSubsystem heatLoad. The authentic decomp (@004b9bdc:6983) reads *(weapon+0xE0)+0x158 = Subsystem::damageZone->damageLevel -- i.e. effectiveRange = (1 - HOST-ZONE DAMAGE) * weaponRange. Same @0xE0-DamageZone-vs- heat misattribution already corrected in HeatSink::UpdateCoolant (heat.cpp:803). Impact: for a charge/discharge weapon (ER laser) the weapon's OWN heatLoad swings 0..1 every fire cycle, so effectiveRange collapsed toward 0 and the weapon was perpetually "out of range" -> Emitter::FireWeapon's `if (dist <= effectiveRange)` gate skipped SendDamageMessage -> NO damage submission and hence NO impact explosion. The beam still rendered (beamFlag/beamEndpoint set before the gate), so the shot LOOKED like a hit but did nothing -- the user-reported "lackluster/absent laser hits, esp. the ER medium, on mechs AND buildings". PPCs mostly worked only because their heatLoad happened to sit low/stable. Fix: read the QUALIFIED this->Subsystem::damageZone->damageLevel (the MechSubsystem shadow is a shim -- heat.cpp:812) so an UNDAMAGED weapon holds its full, STABLE weaponRange, and range shortens only as the weapon's host zone takes battle damage. Verified (parked in range of a building, autofire): laser effRange 500 STABLE (was fluctuating 0/59/340/424 -> mostly out of range); impact explosions 13 in 22s (11 laser id=16 + 2 PPC), up from ~2. Lasers now consistently damage + spawn FX. Also adds env-gated diagnostics used to root-cause this: [fireW] range trace + per-weapon explID (emitter.cpp), and BT_FIRE_AT_STRUCT (mech4.cpp) which designates the nearest world structure so weapon-vs-structure fire can be tested without the screen aim ray. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
bb795e2805 |
MP live-play wave: collision economy, missiles, radar transform, panel polarity, comm ticker
The interactive 2-node playtest wave -- every fix decomp-grounded and live-verified: COLLISION ECONOMY (the ram one-shot): StaticBounce mutates worldLinearVelocity per contact and ProcessCollisionList walks EVERY touched solid per frame; with 2007 terrain-as-solids the reflections compounded x4-x40 within one frame and a walking bump one-shot a pristine mech for 112,375 pts (62-pt authentic economy). Fix: frameEntryWorldVelocity restore per contact (damage always priced at the real approach speed -- all the binary's physics ever saw); Mech::Reset zeroes the mover motion (respawn = teleport); [collide-tx]/[mp-hdlr] telemetry. Gotcha #16 (engine-facility drift class). MISSILES: peer-visible salvos (the launcher record extension carries a salvo counter + aim point; ForceUpdate actually enqueues it -- the dirty flag alone never serialized), the authentic arc (authored MuzzleVelocity vector + the Seeker's 200m/0.1/300 loft + gain-4 steering, decoded from @004beae4/@004bef78), world-impact bursts (rounds detonate on cave geometry instead of phasing through), contact-only damage (flight-cap expiry = fizzle, no more teleport damage), live re-lead, and ballistic (unguided) shells for autocannons. projweap's stale BTPushProjectile extern (the /FORCE signature trap, gotcha #6 corollary) crashed the Avatar's first AFC100 shot -- fixed + sweep rule recorded. RADAR: two transcription bugs made the scope permanently empty -- FUN_0040b244 is the affine INVERSE (not a copy) and FUN_0040adec writes ONLY the 3x3 rotation (never the translation); worldToView now Invert(view) built rotation-first. CulturalIcons sorted out of the moving grid (the phantom red pips were map props), visible-radius culls on all three draw passes, live pip verified at |delta| x ppm px. Gotcha #17 (verify the FUN_ body, not its call shape). WEAPON PANELS (the frozen-dial hunt): the binary's *(subsystem+0x40) means FAILED -- the recon's 'operating' name was backwards, inverting the destroyed-X lamps, the panel look, the children enable and the ready-lamp gate (which had NEVER executed). Polarity chain corrected end-to-end (failedState, fed by real damage saturation). Root cause of the freezes: MFD page-mode gating -- the dev composite shows ALL pages at once, so off-page dials legitimately stopped; under BT_DEV_GAUGES the 15 page-plane bits stay active (the exclusive secondary trio untouched). The SEH gauge guard now names its kills; repaint-heal resets the incremental arc after panel repaints; [panel]/[arc] probes added. COMM/SCORE: MessageBoard LIVE (the engine already shipped the whole Player__StatusMessage queue; wired the binary's one producer -- the kill branch, victim's name, 6s -- plus the consumer bridge and a lazy source bind); MP DEATHS counted via the observed-death tally (each node scores every pilot from locally observed events, the same model as the KILLS credit) and the -2/-1 engine seed clamped for display. DEV UX: node-tagged window titles (-net port), gauge panel reworked (1320x480, true 4:3 MFD cells, the portrait secondary UNROTATED upright, linear filtering, BT_GAUGE_SCALE), fixed close spawns via BT_SPAWN_XZ, Boreas flies an Avatar (first second-chassis live outing). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
092408041c |
Cockpit: the CONFIG-MODE weapon-regrouping session + the live-play fire fixes (tasks #6+#11)
TASK #6 -- the pod's in-cockpit weapon regrouping, fully reconstructed and live-verified (hold-configure -> tap fire button -> toggle membership -> release-commit): - MechWeapon handlers id 9 ConfigureMappables @004b9550 / id 10 ChooseButton @004b95b8 (binary table @0x511860; the old "Myomers fns" mislabel swept) + the GetMessageHandlers() accessor chain through Emitter/ProjectileWeapon/ MissileLauncher/GAUSS/PPC (empty per-class sets swallowed dispatch). - Mapper vtable truth: +0x38 EnterConfiguration / +0x3C ExitConfiguration / +0x40,+0x44 AddOrErase evt/dir. No "secondary vtable @0050f498", no "CreateTemporaryEventMappings" virtual (RP-name drift; swept incl CLASSMAP). L4 Enter/Exit rebuilt complete: StartMappableButtonsConfigure (the NonMapping 0x10000 <-> Mapping 0x8000 mode flip + the gauge's active-weapon latch) + the held-button re-arm + the 4 fire-button temp maps; only the RIO mapper implements the toggle (Thrustmaster no-ops = can't regroup). - MechSubsystem +0xE8/+0xEC corrected to controlDestination/controlMessageID (ex hostEntity/subsystemId2 mislabel); MechWeapon ctor defaults the destination to &fireImpulse (@004b99a8). - ConfigMapGauge state loop reconstructed (PE-recovered DAT_00518eb4 table; buttonGroup GetMapState sampler -- the "needs ModeManager" guard rationale was wrong). Finding [T1]: the shipped binary NEVER enables this gauge (no SetColor caller) -- authentically dormant; BT_CONFIGMAP=1 is the dev enable. - Dev harness: HOLD 'G' opens the session (BT_CONFIG_SLOT picks the weapon); BT_CONFIG_TEST scripts a headless verify. @004afbc4 corrected to its real Fail-trap body (the guessed AddOrErase(NULL) body would corrupt groups). - Bonus [T1]: the binary MechWeapon ATTRIBUTE table has ELEVEN entries (PercentDone..WeaponState) -- "TriggerState is the only one" was wrong. TASK #11 -- the user-reported live-play regressions (both real bugs): - PHANTOM FIRE: the mech4 bring-up shot block painted an explosion at the victim on its OWN 0.3s cadence whenever fire was held -- desynced once the authentic recharges landed. Retired (the real impact visual flows from each discharge via the messmgr SubmitExplosion). - WEAPON BRICKING (the "cuts out" bug): the Loading->Loaded snap window (+-0.01 around seekV) assumes the pod's LOCKED 60 fps; one port dt-spike jumps it, the byte-verified >1.0 clamp (_DAT_004ba830=0) zeroes readiness, and the weapon sticks in Loading at level ~10000 forever (observed live). Fixed with pod-frame (1/60s) sub-stepping of the binary's own Loading tick -- also fixes the I^2R integral over-heating generators on big steps. NEW GOTCHA CLASS recorded: reconstruction-gotchas #12 (frame-pacing trap). - Duty-cycle measured (max-rate autofire): generators equilibrate in the degradation band (recharge stretch ~3.5-4.4x), the FailureHeat breaker never trips solo, PPCs sustain ~11.8-damage full-charge fire. The slow kill pacing and recharge gaps are the AUTHENTIC heat economy; the pilot's counters (this regrouping UI, generator reassignment, coolant valves) are the reconstruction queue. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
4e63a7b6c3 |
Heat: THE AUTHENTIC ELECTRICAL MODEL -- weapons recharge from generators (task #10)
Task #10 set out to fix "scrambled linked-sink routing"; a [heat-link] attach log proved the routing was NEVER scrambled (every subsystem links its authored condenser exactly; the "pools in Condenser1" read was the diagnostic-sampler aliasing trap). The real defect: emitter.cpp's local FUN_00417ab4 stub returned NULL, so the whole electrical model was inert and the E7 force-charge recharged every emitter in ONE frame (~0.3s cycle, 1501 fires/90s, ~1.7e9 heat/s -- the "runaway"). Landed authentically [T1: disasm + byte-verified constants]: - Emitter ctor @004bb120: seekVoltage = authored fraction x generator ratedVoltage (10000); EC = energyTotal/(seekV^2 x 0.5); voltageScale@0x310 = (RechargeRate / -ln(1 - 1e-4 x seekV)) / EC -- charge reaches seekV[rec] in EXACTLY the authored RechargeRate (PPC 5s, ERL 4s, SRM 3s, ERM 2s) cold. Owner-flags ctor gate (the usual gotcha; the this-flags read never armed). - PoweredSubsystem::ChargeTimeScale (@004b0d50, was a =1.0 stub): voltageScale x (1 + thermalResistivity x srcTempRise) -- hot generators charge slower. ("voltageScale is never read back" was wrong; corrected + swept.) - TrackSeekVoltage @004ba838: charging I^2R -> the GENERATOR's pendingHeat (~3.5e8/full PPC charge) -- generators self-heat, conduct to their authored condensers, and throttle further charging. The feedback economy closes. - FailureHeat consumers found: this+0x184 == 2 gates BOTH weapon families (@004baa88 emitter: reset firing + hold charge 0; @004bbd36 ballistic: recoil=rechargeRate + alarm 7). Emitter::GetFaultState un-stubbed. - ProjectileWeaponSimulation @004bbd04 opens with call 0x4b0bd0 (disasm) -- launchers now run the powered/heat step (their firing heat previously accumulated in pendingHeat forever). - heat.cpp: per-instance BT_HEAT_LOG census (the old shared-static 1-Hz sampler aliased); [heat-link] attach log; the stolen-else Verify restored. Verified live (120s max-rate autofire): PPC ~470-500 (was 55,000), bank plateaus ~600 and sheds to ambient, generators 1100-1400, ERMLaser self-regulates at the authored 2000 failure threshold (shutdown-cool-resume). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
4ed2bbc293 |
Heat: authentic 1e7-unit heat + the ambient radiator land (task #9)
- Emitters: heatPortion closed form = heatCostToFire x 1e7 x (charge/seekV)^2 (PPC 1.1e8 -> +632K on its own sink); the missing projectile/missile heat adds (raw -- resources author pre-scaled 1e7 units). - The bank's AMBIENT RADIATOR @4ae73c reconstructed (the system's ONLY heat exit; conductance x 0.1 x HeatSinkCount -- _DAT_004ae974 float80 = 0.1) + the link-attach guard corrected (skip = the 0xBBE bank, not Condenser; the inversion blocked condenser->bank links and closed the system). - Constant corrections (all byte-verified float80s): coolant epsilons 0.0025/0.003/1e-4 (was a single 1e-4 serving three sites); CoolantCapacityScale 0.05 (was 1.738). - Verified: heat flows + exits; max-rate autofire overheats weapons into the authentic heatLoad range-cutout (thermal spam unsustainable by design). - KNOWN REMAINING: linked-sink routing scrambled (heat pools in Condenser1; authored map says PPC->C4/C6) -- the heat-stream offset audit, filed. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
fd055281a8 |
Combat: THE AUTHENTIC DAMAGE ECONOMY -- authored per-weapon amounts through the real fire chain (task #8)
Three root causes, all fixed: 1. kDamageScale was 1.0 -- _DAT_004bafbc is an x87 float80 = 1e-7, cancelling the ctor's x1e7: damagePortion = authored DamageAmount x (charge/seekV)^2 (closed form at fire time; madcat AC=25/LRM=50/ERLL=6, bhk1 PPC=12/SRM=35). The observed "0.25" was the degenerate EC=1 fallback, never authored data. 2. CheckFireEdge NaN latch: TriggerState carries ControlsButton INTS; the release value (-65) is a negative NaN. The binary's x87 unordered compare read it as "released"; IEEE-correct float compares latched the edge detector shut after the first release -- the reason the emitter discharge chain NEVER fired in-game. Fixed with bit-pattern sign compares. 3. The weapon-side submission LIVE: Emitter::FireWeapon fills damageData (amount + damageForce=target-muzzle [the gyro directional-bounce feed] + impact) -> MechWeapon::SendDamageMessage (@004b9728 real body) -> messmgr consolidation with per-weapon records + explosion bundling. The mech4 bring-up damage block + flat kShotDamage retired to diag hooks. Bonus: LODReuseHysteresis 0.82 -> 0.33 (double misread). Zone model verified byte-exact (no change). Solo end-to-end: 5-record volleys (2 PPC + 3 ERML with authored amounts), per-weapon zone granularity, explosions, kill. Heat stays bring-up scale pending the heat-calibration audit [T3]. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
8ed6184d65 |
Combat: AUTHENTIC weapon groups -- streamed per-mech button bindings + the real fire chain (task #5)
The recovered system: fire channels = LBE4ControlsManager buttonGroups (0x40/0x45/0x46/0x47); default groups = the per-mech type-6 controls-map resource in BTL4.RES, installed by the T0 CreateStreamedMappings the port already called -- it needed only the TriggerState attribute (id 0x13 PINNED to the binary value; fireImpulse@0x31C is the binary's TriggerState) and an input feed. Keyboard/harness now push press/release edges into the button groups; the gBT*Trigger bypasses, per-type keyboard split and 1,0 pulse hack are retired -- weapons sharing a button fire TOGETHER (madcat Trigger = 4 weapons). Myomers @4b9550/@4b95b8 misattribution corrected (they are MechWeapon ConfigureMappables/ChooseButton). Verified 2-node: kill through the authentic chain (12 hits vs ~36 pre-groups). Config-mode session (regrouping UI) = the remaining stage, KB-scoped. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
29035028fd |
Cross-pod beams: replicate emitter discharge via subsystem update records
User report: lasers only visible on the window firing them. The peer's replicant emitters never learned the master fired. THE AUTHENTIC PIPE (decomp-verified): - FUN_0041c350 (the "beam keepalive" ServiceDischarge/ContinueDischarge call) does TWO things: queue the LOCAL deferred beam-effect callback (@0x4bac0c) on the app+0x34 manager -- our per-weapon render walk already plays that role -- and set the subsystem DIRTY bit, which maps to the 2007 engine's updateModel / ForceUpdate(). - Replication rides SUBSYSTEM UPDATE RECORDS inside the mech's update message: the roster walk already hands the entity's stream to every subsystem's PerformAndWatch; Simulation::WriteSimulationUpdate serializes each requested updateModel bit; Entity::UpdateMessageHandler routes received records by subsystemID to the subsystem's ReadUpdateRecord. All engine machinery -- the missing pieces were the Emitter's serialize/apply pair + the triggers. CORRECTIONS to the dormant task-33-era transcriptions (never exercised -- nothing ever set updateModel -- so the latent misreads never surfaced): - The weapon-family VTABLE SLOT MAP was swapped: slot 6 = ReadUpdateRecord, 7 = WriteUpdateRecord, 9 = TakeDamage (evidence: Mech hierarchy symmetry + body semantics; @004ba568 resolves an EntityID at rec+0x30 through the entity index -- record semantics, not Damage). Renamed across MechWeapon / Emitter / ProjectileWeapon; the real Emitter::TakeDamage @004bafc8 is undecoded (inherits MechWeapon for now). - Emitter/MechWeapon Write: `*record = 0x38/0x18` is the record LENGTH, not recordID; rec+0x30 is the TARGET's EntityID (GetEntityID()), not a colour -- the old `CopyColor(targetEntity+0x184)` was also a databinding trap. - OVERRIDE-SIGNATURE TRAP: the decls used each class's own shadowing UpdateRecord typedef as the param type, silently NOT overriding the engine virtual (the base ran instead; nothing would ever have serialized). Base-typed params (Simulation__UpdateRecord*), casts inside. - Emitter::ReadUpdateRecord reconstructed (@004ba568): target EntityID resolve (drop unknown non-null targets), MechWeapon alarm apply chain, beam fields. - ServiceDischarge/ContinueDischarge: ForceUpdate() per keepalive tick + one final record at beam end (turns the peer's beam off). - Mech::DrawWeaponBeams extracted from the player-only drive block so the walk runs for REPLICANTS (+ per-mech gun-port cache -- the process-wide statics would have served the player's segment pointers as the replicant's muzzles). VERIFIED 2-node: A fires 57 volleys -> 225 emitter records -> B applies all 225 -> B draws 414 beams (PPC blue / laser red, from A's replicant's own gun ports). Solo un-regressed (150 beams, kill chain, no crash). Also preserved: the full Mech::WriteUpdateRecord @0x4a0c2c recovery (reference/decomp/mech_writeupdate_004a0c2c.disasm.txt) with all 9 record types decoded (pose/alarm/leg-state+heat with the body-channel write-through re-sync, knockdown, death, impact, movementMode) -- transcription deferred; it replicates remote knockdown/death/heat and was not needed for beams. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
14c0dd06f5 |
Three-trigger keyboard weapon groups: 1=lasers 2=PPCs 3=missiles (task #43)
Interim pod-like grouping ahead of the authentic ConfigureMappables/ ChooseButton mapper channels (decomp-anchored in open-questions): - Three fire channels like three pod buttons: gBTWeaponTrigger (lasers, key 1 or SPACE), gBTPPCTrigger (PPCs, key 2), gBTMissileTrigger (missiles, key 3 or CTRL). Keyboard only per user (mouse buttons removed). - EmitterSimulation picks its channel by classID (PPC 3028 vs Emitter 3016); BT_AUTOFIRE holds all three. - The BT_BEAM_LOG sampler modulus 30 aliased to ONE weapon under the new synchronized 5-beam volleys (5 | 30) -> 31 (coprime). Verified: all 5 energy weapons fire (31 samples each), aimed hits land, kill completes. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
c2f70f6348 |
Beams CUT on a destroyed target (the real FUN_0049fb54, was a mislabeled stub)
Answers "can I keep targeting the dead mech?": the lock isn't cleared by anything we've found, but the binary REFUSES to sustain energy beams on a destroyed mech: ServiceDischarge (@004ba8d0) and ContinueDischarge (@004baa20) check the beam's target EVERY discharge frame -- IsDerivedFrom(Mech) then Mech::IsDestroyed (FUN_0049fb54 = movementMode 2||9) -- and kill the beam the moment it dies. EmitterSimulation (@004baa88) applies the same check to the OWNER (a dead mech's own weapons drop everything). Our recon had FUN_0049fb54 as a mislabeled "cockpit/HUD query" no-op stub called with NULL, and never set the beam's target (0x474) at fire -- all three authentic gates were dead. Now: FireWeapon stashes the owner's target entity; both discharge paths + the owner gate run the real check (BTMechDestroyed). Verified: 40 beam samples before the kill, 0 after -- lasers flash-fail on the wreck instead of cutting it like butter (heat is still spent per the binary's FireWeapon, which fires blind; only the DISCHARGE checks the corpse). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
070af409f7 |
gauge wave P1a: publish heat/power/weapon attributes + radar zoom
The gauge-databinding-map workflow found most cockpit gauges resolve NULL because the reconstructed subsystems publish only a fraction of the attributes the config binds. First publishing batch (attribute tables are read-only static data; ids kept a dense prefix from each parent's NextAttributeID): - HeatSink table dense-append: DegradationTemperature/FailureTemperature (the condenser temp-bar warn/max endpoints -- were NULL, so the two-part bars could not scale), NormalizedPressure/DegradationPressure/CoolantMassLeakRate, and the HeatSink link. Condenser/Reservoir inherit this -> all 6 condenser temp bars now resolve current/warn/max (verified: BT_GAUGE_ATTR_LOG all OK). - PoweredSubsystem::GetAttributeIndex() (new) publishes InputVoltage->voltageSource -- the cluster power-branch gate (the power-lamp/generator-voltage/state-lamp sub-branch is skipped when it resolves NULL). Flows to Sensor/Myomers/weapons. - MechWeapon::GetAttributeIndex() (new) publishes OutputVoltage/PercentDone-> rechargeLevel; Emitter/PPC/ProjectileWeapon/MissileLauncher/GaussRifle DefaultData re-pointed at it (they carried an EMPTY default-constructed index -> resolved NOTHING). Verified: the ER MED LASER / PPC / STREAK weapon clusters now render live recharge dials (were blank TEMP/STATUS). - Mech::SetTargetRange un-stubbed (radarRange = range) -> the radar map scale + overlay range readout track the mapper's zoom (was frozen at 1000). - GAUGREND ParseAttribute: env-gated per-binding resolution trace (BT_GAUGE_ATTR_LOG) -- durable diagnostic infra for the wave. Verified DBASE+dev gauges: no startup/gauge-construction crash (dense chain intact), combat un-regressed (TARGET DESTROYED), clusters build with InputVoltage resolving. Remaining config-binding NULLs: HeatSink/AmbientTemperature (aggregate bank, P3) + Searchlight/LightOn (P1b). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
9d82be46a1 |
P7: subsystem-tree alarm unification -- the whole PoweredSubsystem weapon/power subtree is byte-exact
The reconstruction modeled the binary's 0x54 AlarmIndicator (FUN_0041b9ec) with undersized
stand-ins (AlarmIndicator==ReconAlarm==4B; HeatAlarm==8B) across the entire subsystem tree, so
every field above an alarm sat at the wrong compiled offset. Retype every such stand-in to
GaugeAlarm54(0x54) and de-phantom each class against its ctor, so the whole PoweredSubsystem
subtree becomes byte-exact. An 8-agent read-only decomp-mapping workflow decoded every ctor
first; then hands-on implementation. static_assert-locked chain (verified vs the raw ctors):
HeatSink 0x1D0
-> PoweredSubsystem 0x31C retype electricalStateAlarm@0x264 + modeAlarm@0x2B8 @004b0f74
-> MechWeapon 0x3F0 retype weaponAlarm@0x350; delete 5 phantom tail fields @004b99a8
-> Emitter 0x478 delete outputVoltage/beamLengthRatio/firingArmed aliases
+ beamHit*/beamColor/beamHitData/energyRampTime phantoms;
retype beamOrientation EulerAngles->Quaternion(16B) @004bb120
-> PPC 0x478 (no own fields) @004bb888
PoweredSubsystem -> Sensor 0x328 (no alarm; 3 own fields) @004b1d18
PoweredSubsystem -> Myomers 0x358 (no alarm) @004b8fec
New systemic bug-class instances fixed (added to the CLAUDE.md checklist):
* alias field - Emitter outputVoltage==inherited rechargeLevel@0x320; beamLengthRatio==
beamScale.z@0x434; firingArmed==inherited useConfiguredPip@0x3E0
* phantom field - MechWeapon segmentReference/pipSegment/hasTarget/targetPoint/muzzlePoint
(past 0x3F0); Emitter beamHitPoint/beamImpact/beamImpactScalar/beamColor/
beamHitData/energyRampTime (binary writes inherited damageData/voltageScale
or the value is a method local)
Non-layout fixes required in the same wave:
* outputVoltage->rechargeLevel also in the compiled GAUSS.CPP:74/93 (external readers of the
removed Emitter field -- must grep EVERY TU, not just the class's own .cpp)
* MechWeapon::GetMuzzlePoint reimplemented faithfully (removed muzzlePoint collided with
Emitter's own fields at 0x3F0) via a BTResolveWeaponMuzzle void* bridge in mech4.cpp,
resolving the weapon's mount segment (inherited this+0xdc) through the owner segment table
* DetachFromVoltageSource fixed to set electricalStateAlarm not modeAlarm (raw @004b0e30
writes the 0x264 alarm)
The vehicleSubSystems aux-screen gauge raw reads (btl4gau2.cpp:868/952 at subsystem+0x2b8/+0x278)
and the Sensor RadarPercent path now read the CORRECT byte offsets (garbage under the short layout).
Verified: combat DESTROYED-in-8, 28 shots, 0 crashes, heat heatEnergy=1.34e7, every static_assert
lock passes, heapcheck-clean through construction (the phase the isolated PoweredSubsystem retype
had overflowed). LESSON: a factory-bridge runtime Check(sizeof<=alloc) does NOT fail the build --
only a static_assert sizeof lock catches alloc overflow at compile time.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 4.8
|
1356870e56 |
P7: byte-exact re-base of the CORE heat leaf (HeatSink/Condenser/Reservoir/Generator/Myomers)
The reconstruction modeled the binary's shared alarm/connection types with undersized
stand-ins, sliding every field above them low (the 72-byte auxScreenNumber gap). Fix the
foundational heat-leaf classes byte-exact + static_assert-lock them, from the ctor decomp:
Shared types corrected:
* SubsystemConnection 4 -> 0xC (binary link node FUN_004af9cf; FUN_00417ab4 derefs +8)
* GaugeAlarm54 = 0x54 (real AlarmIndicator FUN_0041b9ec; STATUS level at +0x14,
so subsystem+0x184 == heatAlarm+0x14 == GetLevel())
WatcherGaugeAlarm now typedefs GaugeAlarm54 (Watcher branch locks stay valid).
Byte-exact + locked (ctor-verified):
* HeatSink heatEnergy@0x158 linkedSinks@0x164 heatAlarm@0x170 resource@0x1C4
pendingHeat@0x1C8, sizeof 0x1D0 (@004adda0)
* Condenser valveState@0x1D0 condenserAlarm@0x1DC (@004ae568)
* Reservoir reservoirAlarm@0x1D0 ... squirtEfficiency@0x22C, sizeof 0x230 (@4aef78)
* Generator stateAlarm@0x1FC, sizeof 0x250 (@004b225c)
* Myomers phantom moverConnection tail removed (fits 0x358)
Three systemic bug classes fixed (added to the checklist in CLAUDE.md / HARD_PROBLEMS.md):
* alias field - a subclass member re-declaring an inherited slot the ctor reuses
(Condenser refrigerationOutput==massScale@0x160; Reservoir
coolantCapacity==thermalCapacity@0x128) -> use the inherited name
* alarm-interior - a value read at alarm+0x14 modeled as a separate member
(HeatSink heatState@0x184, Reservoir injectActive@0x1e4)
-> route to alarm.GetLevel()
* phantom field - a member past the object end (Generator shortFlag@0x25C is really
*(owner+0x190)+0x25c the msg-manager, @004b0efc; Myomers
moverConnection@0x110 a write-only base slot) -> remove it
Heat conduction now reads the REAL heatEnergy=1.34e7 (not garbage); combat DESTROYED-in-8,
0 crashes, heapcheck-clean through construction.
REMAINING (measured; a distinct larger task): making PoweredSubsystem byte-exact grows it
+0x98 and cascades into MechWeapon/Emitter/PPC/Sensor/Myomers -- all model the 0x54
AlarmIndicator with 4-byte ReconAlarm / 8-byte HeatAlarm stand-ins and are short +
phantom-tailed; retyping without byte-exacting them overflows the Emitter alloc (heap
corruption). PoweredSubsystem kept on HeatAlarm(8) stand-ins (marked) pending a
subsystem-tree ALARM UNIFICATION. See docs/HARD_PROBLEMS.md P7.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 4.8
|
7b7d465e5e |
Initial commit: bt411 -- standalone Windows BattleTech (Tesla 4.10 port)
Clean, self-contained extraction of the BattleTech-specific work from the
reverse-engineering workspace -- engine + game + content + build, with nothing
from Red Planet or the raw archive dumps. Builds green (Win32) and runs the
single-player drive->animate->target->fire->damage->destroy loop out of the box.
Layout:
engine/ MUNGA + MUNGA_L4 shared 2007 engine, carrying our BT render/loader
work (bgfload/L4D3D/L4VIDEO: BSL bit-slice decode, LOD/ground/shadow
models) + image codec; the minimal rp/ headers the audio HAL needs
game/ reconstructed BT logic + surviving-original BT source + fwd shims
+ WinMain launcher
content/ full runtime tree (BTL4.RES, VIDEO/, GAUGE/, AUDIO/, eggs, BTDPL.INI)
docs/ format specs + reconstruction ledgers
reference/ raw Ghidra pseudocode (recon source-of-truth) + decomp exporter
tools/ MP console emulator + map/resource scanners
One top-level CMake builds munga_engine lib + bt410_l4 game lib + btl4.exe.
All paths relativized (186 fwd shims + ~437 CMake abs paths -> repo-relative);
DXSDK is the one external, overridable via -DDXSDK. Verified: builds to a
byte-identical 2.27MB exe and runs combat (TARGET DESTROYED, 0 crashes) against
the bundled content.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|