BattleTech {VERSION} -- multiplayer client
==========================================
IMPORTANT: FULLY EXTRACT this zip first (right-click - Extract All).
Do NOT run anything from inside the zip. The .bat files must sit next
to the 'content' and 'build' folders.
UPGRADING from an older version? Extract the new zip OVER your
existing game folder and say YES TO OVERWRITE. Do NOT delete the
folder first -- your personal files (content\bindings.txt with your
key/joystick setup, content\volume.cfg with your volume) are not in
the zip and survive an extract-over-top, but a delete wipes them.
If you prefer a clean delete anyway, copy those two files out first
and put them back after.
TO JOIN AN INTERNET GAME: double-click join.bat
-- pick your CALLSIGN and MECH, click JOIN (your choice is sent to
the operator; waits for the session if it's not up yet)
TO JOIN A LAN GAME: double-click join_lan.bat (operator's LAN;
same callsign/mech menu)
SINGLE-PLAYER: double-click play_solo.bat -- opens the
mission menu: pick your mech (all 18), map, experience level,
colours, weather and mission length, then launch
{STEAM}STEAM INTERNET PLAY: double-click play_steam.bat (EXPERIMENTAL --
{STEAM} needs the Steam client running; host or join from the menu)
Your seat is assigned automatically; you'll pilot the mech you picked
in the join menu (the operator can override it).
When a round ends your game AUTOMATICALLY rejoins for the next one
(same seat, same mech) -- just wait for the operator's next launch.
Close the window to leave for real.
If the game closes unexpectedly, send the operator TODAY'S log --
content\join_YYYYMMDD.log (the NEWEST one) -- plus content\lastrun_join.txt.
AFTER A MULTIPLAYER SESSION: the game writes a small match report
(content\matchlog_<date>_<time>_<number>.txt) and, on join.bat /
join_lan.bat, UPLOADS IT TO THE OPERATOR BY ITSELF at the end of each
round -- you do not need to send it. Please send one MANUALLY only if
the game CRASHED mid-round (the upload happens on a clean round end, so
a crash loses it) or if you were playing SOLO or over STEAM (no relay
to upload through).
IF ANYTHING CRASHED OR MISBEHAVED, send BOTH of these -- neither is ever
uploaded, they only exist on your machine:
content\join_YYYYMMDD.log today's date; the NEWEST one. There is now
ONE log per day holding every session, so a
crash is no longer erased when you relaunch.
Each session inside it starts with a line
"===== BT411 SESSION ... =====" naming your
build and PC, so it still identifies itself
if the filename gets changed when you send it.
content\lastrun_join.txt tiny; send it EVEN IF there is no log dated
today -- that combination is exactly how we
tell "the game was blocked before it started"
(antivirus, or a missing system file) apart
from a normal crash.
If you UPGRADED over an older copy you may still have an old content\join.log
lying around. Nothing writes to it any more -- ignore it, or delete it, so
you don't send a stale one by mistake.
You start INSIDE the cockpit with the pod's MFD panels composited
around the view (one window). The red MFD buttons, radar rails and
joystick buttons are all MOUSE-CLICKABLE -- right-click a button to
latch it held. Press ` (backtick) any time to toggle the external
camera.
CONTROLS (keyboard) -- NEW DEFAULT LAYOUT THIS BUILD:
The keyboard IS the cockpit button board now: the letter and number
rows are the MFD button banks laid out where they sit on the panel,
and FLIGHT LIVES ON THE NUMBER PAD. Full map: CONTROLS.txt.
UPGRADING? Your bindings are MIGRATED to the new board on first
launch: any keys YOU added or changed are kept (they beat the new
defaults), and your joystick/HOTAS wizard setup is kept exactly --
but the old stock keys (W/S throttle, A/D turn, V camera, M mode...)
are replaced by the layout below. Your previous file is saved as
content\bindings.old.txt if you want to copy a favourite line back.
FLIGHT (number pad -- NUMLOCK ON):
NumPad 8/2 ........... torso aim up/down NumPad 7/9 .... left/right pedal
NumPad 4/6 ........... torso twist NumPad 5 ...... all stop
NumPad 0 or Space .... main trigger NumPad 1/3/. .. pinky/middle/upper
Shift/Ctrl ........... throttle up/down Alt ........... reverse thrust
Left/Down/Right ...... look left/behind/right Up .......... torso centre
` (backtick) ......... cockpit / chase camera
PgUp / PgDn .......... game volume up/down (saved between sessions)
THE PANEL ON YOUR KEYS: 1-4/QWER = heat & coolant, 5-8/TYUI =
engineering, 9-0-minus-equals/OP[] = comm, ASDF/ZXCV = left weapons,
HJKL/NM,. = right weapons, F1-F12 = the map columns (F1/F2 zoom,
F4 crouch, F7 CONTROL MODE, F9-F12 Generators A-D). G and B are
deliberately unbound -- feel for the gap. Every button also stays
mouse-clickable on screen (right-click latches it held).
NOTE: you SPAWN IN BASIC control mode (the pod's rookie setting) --
in BASIC the stick steers and the pedals do NOTHING. Press F7 once
for MID (pedals steer, stick twists the torso -- the full
experience). If 'turning does not work', it is this, not a bug.
CONTROL MODE (BAS/MID/ADV, the F7 key IN the cockpit) is NOT the
menu's EXPERIENCE setting (novice/standard/veteran/expert) -- that
one changes the simulation (heat, damage), not your controls.
1/2/3/Q/W/E are the six coolant valves and 4 (hold) is the flush.
CAREFUL with the valves: the detents go 1 - 5 - 50 (max) -
0 (CLOSED!) - back to 1. One press past max SHUTS THE LOOP OFF and
everything on it will overheat -- watch the valve dial on the coolant
screen. Boosting one loop starves the others (the supply is shared).
A weapon gone quiet with ammo left has probably JAMMED (heat makes
ballistic weapons jam -- authentic!). Check its panel's ENG DATA page
for the jam lamp (a cocked round with warning bolts). The pod's fix
is the EJECT button on that weapon's ENG DATA page: TAP to eject the
jammed round (weapon reloads and returns to service), HOLD ~3s to
jettison the whole bay before it cooks off. Watch the TEMP strip and
pace salvos.
NEW: on a jam or a bay fire, that system's ENG-page buttons now FLASH
to catch your eye -- the pod's own annunciator, restored.
NEW AND DANGEROUS: an AMMO BAY FIRE is now genuinely lethal. You get
a fire icon by the ammo counter, the flashing buttons, and about TEN
SECONDS -- then the bay detonates for (rounds x per-round damage),
which can and will kill you. HOLD the EJECT button on that weapon to
dump the bay and put the fire out. Previously these fires were
harmless; they are not any more, so treat one as an emergency.
G (hold) + fire key .. regroup a weapon onto that trigger -- or hold a
weapon panel's red PROGRAM button with the mouse and tap a fire key;
the joystick diagram on the panel shows the binding live.
FIXED THIS BUILD -- the automatic re-attach now works. Previously a weapon
detached by the BUS MODE button stayed dark for the rest of the mission and
you had to rescue it with a GENERATOR SELECT button. It now recovers by
itself, as the arcade did.
HOW POWER ROUTING WORKS (the ENG page). Each weapon draws from one
generator, and it has three routing modes:
GENERATOR SELECT A/B/C/D -- you pick that generator by hand.
BUS MODE, first press ---- AUTO: the mech hunts for any live generator
and attaches to it by itself. This is what
recovers a weapon whose generator died.
BUS MODE, second press --- detached. The weapon goes dark on purpose --
blank recharge arc, no ready dot, will not
fire. Press BUS MODE again for AUTO, or a
GENERATOR SELECT button to choose one.
So it is TWO presses of BUS MODE to take a weapon off line, and one more to
put it back on AUTO. There is no on-screen label for the current mode --
that is authentic, the pod had none either. You tell by behaviour: on AUTO
a weapon with a working generator comes back on its own.
NOTE these are two different buttons: BUS MODE routes a WEAPON to a
generator, while the GENERATOR A-D buttons on the radar rail (F9-F12) turn
the GENERATORS THEMSELVES on and off.
An Xbox controller works out of the box. FLIGHT STICKS / HOTAS /
pedals: run joyconfig.bat ONCE -- a wizard asks you to move each
control (stick, twist, throttle, fire buttons), writes the bindings,
and drops you into the solo menu to try them. Rebind keys in
content\bindings.txt (regenerates with defaults if deleted).
FULL CONTROLS REFERENCE: see CONTROLS.txt next to this file -- every one of
the pod's 72 cockpit buttons, what it does, and which display it sits on.
COCKPIT LAYOUT: content\environ.ini (written on first run, every option
documented in the file itself) sizes the MFDs and the map, moves the map out
of the middle of the road, or breaks each display into its own window. The
cockpit now scales to ANY window shape without distorting -- drag it, maximise
it, or launch with -fit for borderless full screen.
This build: {VERSION}. Private -- do not redistribute.
{EXPIRE}Test builds STOP WORKING 14 days after they are made -- if the game
{EXPIRE}says it has expired, just grab the operator's newest zip.
