BT411/context/pod-hardware.md

id, title, status, source_sections, related_topics, key_terms

id	title	status	source_sections	related_topics	key_terms
pod-hardware	Pod Hardware — the fixed target (7 monitors, D3D9, RIO)	established	PROGRESS_LOG.md §3; the PLATFORM PROFILE + GAUGE DEV-COMPOSITE notes	gauges-hud rendering project-overview	pod RIO MFD IG-board SVGA16

Pod Hardware (the fixed target)

The port must run on (a) a dev box and (b) the fixed arcade pod. The pod is a hard constraint that bounds the graphics API. Full detail: docs/PROGRESS_LOG.md §3.

Displays

• 2 video cards → 7 monitors: main 3D view 800×600; radar 640×480; five monochrome MFDs driven as one 1280×480 horizontally-spanned surface. [T1]
• Requires old NVIDIA drivers for the MFD horizontal spanning — a hard constraint that bounds the graphics API → Target Direct3D 9 (lowest common denominator that runs on old-driver pods AND modern cards; one codepath). NOT Vulkan/D3D11+. CUDA is irrelevant (compute, not display). [T1]

Cockpit I/O (RIO)

Joystick X/Y, throttle, pedals, buttons over serial COM (L4RIO, L4SERIAL). Must be remapped to keyboard/gamepad on a dev box; real wiring is a pod bring-up task (Phase 8). The engine is a PUSH model — LBE4ControlsManager groups are fed by all devices (RIO on the pod, DirectInput on dev); the MechControlsMapper interprets them (locomotion). [T2]

The button space + lamps [T0, L4CTRL.h enum]

buttonGroup addresses 0x00-0x47: AuxLowerRight/Left 1-8 (0x00-0x0F), Secondary1-12 (0x10-0x1B), AuxUpperCenter/Left/Right 1-8 (0x20-0x37; 0x30-0x37 = the target HOTBOX, pilot select), icom/door 0x39-0x3C, Panic 0x3D (the config-mode lamp), Throttle1 0x3F (throttle-head = REVERSE THRUST), joystick cluster 0x40-0x47 (Main trigger 0x40, hat 0x41-0x44, Pinky/ThumbLow/ThumbHigh 0x45-0x47 — the four MAPPABLE fire buttons). "Lamp buttons" are literal: physical illuminated pushbuttons in panels around the screens; the RIO LampRequest protocol lights them (MakeLinkedLamp), reports burned-out bulbs (RIODeadLamps failure page, per-lamp names). A lit button = active. Keypads are NOT buttons: keyboardGroup[KeyboardPilot/ KeyboardExternal] carry key VALUES ('0'-'9','A'-'F', L4CTRL.cpp:2526). RIO event convention: press = buttonGroup[a].Update(a+1, modeMask) (mask saved), release = Update(-a-1, savedMask) (L4CTRL.cpp:2470-2520). Bank→MFD assignment (Gitea #9, from the streamed "L4" .CTL EventMapping dump [T1]): each preset-able MFD owns the 8-button bank AROUND it, mode-mask-gated per page — Mfd1 (lower left) = 0x08-0x0F (AuxLowerLeft), Mfd2 (upper center) = 0x20-0x27 (AuxUpperCenter), Mfd3 (lower right) = 0x00-0x07 (AuxLowerRight): Quad page → the outer buttons direct-select the populated Eng pages; Eng page → one button back to Quad, the rest drive the shown subsystem (generator select A-D msg 4-7, gen mode msg 8, weapon configure msg 9; also msg 0x3 = ToggleCooling and msg 0xb = ToggleSeekVoltage (energy) / EjectAmmo (ammo weapons) — unreconstructed, silently dead). Always-active records IDENTIFIED 2026-07-20 [T1] (roster: sub 3 = Reservoir, 4-9 = Condenser1-6, 10-13 = GeneratorA-D): 0x2C = the COOLANT FLUSH button (Reservoir InjectCoolant, hold-to-flush — works), 0x2F/0x2E/0x2D/0x2B/0x2A/0x29 = the per-condenser VALVE buttons (MoveValve, Cond1-6 — work), 0x1A-0x1D = Generator A-D ON/OFF (ToggleGeneratorOnOff id 4, binary table @0050fb90 fn @004b1ed0 — DEAD until reconstructed). Newly decoded from the binary message tables: 0x13 → Mech DuckRequest (0x1a @0049fa00 — the manual's CROUCH button), 0x28 → Mech BalanceCoolant (0x16 @0049f728), 0x12 → ThermalSight toggle (id 3), 0x14 → Searchlight + Searchlight2 ToggleLamp (id 3 @004b860c; body reconstructed but the handler-set is default-constructed EMPTY — unwired) — all currently dead; an unhandled message is SILENTLY ignored (Receiver::Receive finds no handler and does nothing — dead buttons produce NO log). 0x10/0x11 = map ZoomIn/Out, 0x15 = CycleDisplayMode, 0x18 = CycleControlMode (#6). Buttons with NO streamed mapping authored (authentically inert): 0x16/0x17/0x19/0x1E/0x1F/0x38-0x3E. Full decode: gauges-hud §preset pages; the complete 72-button census + verification: docs/GLASS_COCKPIT.md §2026-07-20.

Desktop input remap — CONTROLS.MAP + XInput (2026-07-18) [T2 live]

game/reconstructed/btinput.cpp + content/CONTROLS.MAP (WASD-classic default, compiled-in twin; content/CONTROLS_NUMPAD.MAP = the corrected community numpad profile). Grammar: key <name> button <addr>|axis <axis> deflect|rate <n>|keypad pilot|external <0-15>|pckey <char>|action <name>; pad <button> same targets; padaxis <src> axis ... [invert] [deadzone d] [rate n]. Axes: Throttle (lever, rate-walks + sticks), LeftPedal/RightPedal/Pedals (turn, springs), JoystickX (torso twist), JoystickY (torso ELEVATION — pitch aim; every 1995 control mode routes it to Torso::SetAnalogElevationAxis; keys R/F + pad LeftStickY in the default map; verified to the authentic VerticalLimitTop clamp, 20° on the Blackhawk; aims the GUNS — reads on the HUD elevation tape, the eyepoint stays level). AXIS SIGN CONVENTION (2026-07-18, user-verified) [T1]: the sim uses MATH convention — positive turnDemand / twist / free-aim slew is CCW (LEFT). On the pod the RIO Ranger owned the hardware sign; the desktop key bridge negates ONCE per channel (key_turn = -gBTDrive.turn; stickPosition.x = -gBTTwistAxis; the SetFreeAimSlew call-sites pass the bridge value un-negated) so input-right = turn/twist RIGHT (manual p8: "pulling your joystick to the right torso twists your 'Mech to the right"). Forced/BT_GOTO harness demands are already sim-frame and stay un-negated. Lesson: large-rotation screenshot comparisons are AMBIGUOUS — trust tracked landmarks, numeric yaw telemetry with an established convention, or the user's live observation. Emissions mirror the RIO conventions above exactly; the four fire buttons (0x40/45/46/47) publish as levels to the bring-up fire channels instead of buttonGroup (avoids double-fire once the streamed ChooseButton mappings are exercised). XInput loads dynamically (xinput1_4 → 9_1_0; disconnected-pad probing rate-limited to 1 Hz). Keys claimed by a binding are SUPPRESSED from the legacy WM_CHAR/KEYUP feed (BTInputSuppressKey, hook at L4CTRL.cpp keyboard read) — this ended the historic DOUBLE-DISPATCH: 'w' drove AND selected pilot 0; F5's key-up value 0x74 aliased to the 't' hotkey; letter key-ups (uppercase) fed the developer fake-event dispatcher. Unbound keys keep their authentic 1995 dispatcher meaning (reachable from any key via pckey). The old dual-use 'V' (view toggle + look-behind) is split: V = ViewToggle, B = LookBehind. Verified live: bindings load, W/NumPad8 drive (spd rises), X all-stop, aux-button emission ([input] 0x2f PRESS), suppression both directions ('r' delivered / 'w' swallowed), full-keyspace WM_CHAR+WM_KEYUP fuzz survived. Diag: BT_INPUT_LOG.

The pod throttle is ANALOG-CONTINUOUS, not notched (verified end-to-end) [T1]

The authentic pod throttle path — traced 2026-07 (task #50 throttle-fidelity question):

1. Hardware → RIO: serial AnalogReply packet → Ranger("Throttle", 0, 800, .05) — raw counts 0–800, 5% deadband, auto-ranging offset, output a CONTINUOUS Scalar; the sign is inverted ("Throttle counts BACKWARDS", engine/MUNGA_L4/L4RIO.cpp:1374-1377, Ranger @L4RIO.cpp:461-701). No quantization/notching anywhere in Ranger::Update.
2. Manager: LBE4ControlsManager::Execute → scalarGroup[ScalarThrottle].Update(&rioPointer-> Throttle, mode_mask) on every AnalogReply (L4CTRL.cpp:1379-1382). ScalarThrottle = index 0 → manager+0x24 (scalarGroup base 0x24, 0x20/entry; buttonGroup base 0x1c0, keyboardGroup 0x160).
3. Streamed .CTL mapping (the "handled elsewhere"): MechRIOMapper's ctor @004d266c binds NO throttle — the bind comes from the type-19 ControlMappingStream resource named "L4" (child of the per-mech type-6 ControlMappingsList; installed by BTL4APP MakeViewpointEntity via CreateStreamedMappings @0047703c). BTL4.RES "L4" record [1]: Scalar Throttle → subsystemID 0 (ControlsMapper slot), DirectMapping, attr 4, mask 0xffffffff. Attr 4 = "ThrottlePosition" @ mapper+0x11c (binary IndexEntry table @0050efd8: id 4 → offset 0x11d-1 = 0x11c, name "ThrottlePosition" @0050f28f). Reverse = record [2]: Button Throttle1 (0x3F, on the throttle handle) → attr 6 ReverseThrust@0x124. Turn = pedals value-bound in the ctor (manager+0x44/+0x64 → mapper+0x1b4/+0x1b8). Step-2a fix (2026-07-17) [T2]: these ids are POSITIONAL (Find(id) = index[id-1]) and our MechControlsMapper chain started one low (Subsystem::NextAttributeID==2 vs the binary's 3) — every streamed record landed one member late (a real-pod landmine: the RIO throttle scalar drove pedalsPosition). Ids are now PINNED to the binary numbering with an id-2 pad + static_assert locks (mechmppr.hpp/.cpp); audit tool BT_CTRLMAP_LOG=1. Details: docs/GLASS_COCKPIT.md §2a; see glass-cockpit.
4. Interpretation: L4MechControlsMapper::InterpretControls @004d196c applies the ONLY software detent — snap to 1.0 when |t−1.0| ≤ 0.05 — then MechControlsMapper::InterpretControls @004afd10 computes speedDemand@0x128 = maxSpeed(mech+0x34c) × throttlePosition(0x11c) × scale(mech+0x5c0) (forward) or −maxSpeed × throttlePosition (reverse flag 0x124).

Consequence: the original pod produced a continuously varying speedDemand while the lever moved (updated per serial AnalogReply, NOT per render frame). There are NO "5 throttle notches" anywhere in the software path. (Keyboard keys '1'-'5' in @004d1bf0 set controls-manager MODE masks; the '+'/'-' pair steps a [0,5] value that drives pow(2,x) into mech+0x404 = HUD zoom 1×–32× — neither is a speed setting.) The mech's throttleState@0x4a4 writer remains un-exported (likely in the 0x4a9b5a–0x4ab188 gap) — open-questions.

MECHANICAL-notch hypothesis (2026-07-16) [T4, hardware]: the "5 speeds" pod lore may still be true — as detents in the throttle QUADRANT hardware, invisible to the software (the pot reads continuous counts regardless of where the lever mechanically rests). Independent corroboration from the gait math (locomotion): the gait SM has NO stable state for a demand between the walk cap (walkStrideLength@0x534) and the run engage speed (reverseSpeedMax@0x538, the walk→run transition clip's exit speed) — a demand PARKED in that band hunts walk→shift-up→shift-down forever, firing the authored EngineShiftFwd/Rev sounds each swing (binary-verified, all-authentic data: Blackhawk band = demand 22.02–30.87 = throttle 36–50%). A design like that only ships if the hardware discourages parking in the band. Port accommodation: the keyboard lever snaps out of the dead band AT REST (mech4.cpp "GAIT DETENT"; sweeping through while held stays continuous = authentic moving lever). Ask Nick: did the pod throttle quadrant have mechanical detents (how many / positions)? — open-questions.

Multi-surface gauge path (intact, pod-only by default)

The pod multi-surface path EXISTS and is intact: DPLRenderer::FindBestAdapterIndices (multi- adapter selector, honors PRIMGAUGE/SECGAUGE/MFDGAUGE/SPANDISABLE), SVGA16::BuildWindows (a fullscreen D3D device + window per gauge/MFD surface, MFD span = width×2), L4GaugeRenderer (gated on L4GAUGE). content/SETENV.BAT is the authentic pod env preset (L4CONTROLS=RIO,KEYBOARD; L4GAUGE=640x480x16; L4PLASMA=com2). [T2]

Platform profile switch

-platform pod|dev (or BT_PLATFORM env; default DEV) selects a runtime env preset WITHOUT forking the codepath. DEV = keyboard + single 800×600 window. POD = RIO input (keyboard fallback off serial) + multi-surface gauges (from SETENV.BAT/L4GAUGE on real hardware). -platform pod does NOT auto-enable L4GAUGE (each surface needs its own fullscreen device on the pod's 2 cards). Off-pod, the 6 MFD surfaces render in a dev window via BT_DEV_GAUGES (gauges-hud). [T2]

MFD surface model

All cockpit surfaces are bit-plane MASKS over ONE shared SVGA16 pixelBuffer: sec=palette low byte; Heat=0x4000, Mfd2=0x0400, Comm=0x8000, Mfd1=0x0100, Mfd3=0x1000; Eng1-3 = engineering-mode alt planes; overlay=0x00C0 (shares the sec surface). See gauges-hud. [T2]

The 1995 player manual — alignment audit (2026-07-18) [T1, primary source]

reference/manual/Tesla40_BT_manual.pdf (34pp, from Nick). CONFIRMS the reconstruction on every checked control behavior:

• Control modes are named BAS / MID / ADV (basic/middle/advanced; our Basic/Standard/Veteran names came from the RP analog — mechanics identical): BAS = joystick turns the mech, pedals inactive, NO torso twist; MID = pedals turn + auto-slow for tightest radius, joystick = torso; ADV = as MID but NO auto-slow (wider radius at speed) — exactly our mapper's turn-clamp difference. Mode button = top right of the secondary screen.
• Stick right = torso right in MID/ADV (p8) — the corrected sign. Blackhawk and Owens are the fixed-torso exceptions (named in print!); twist arc "about 120°" (per-mech: Loki/Thor tables say Torso Limit 110°, Torso speed 60°/s).
• Throttle is a continuous lever (push=accelerate, pull=stop; inertia); reverse = HOLD the red throttle button (release = forward) — our 0x3F hold-state model.
• Hot Box Selector MFD = callsign buttons + a CLOSEST button (lower right = our hotbox button 8 → ChooseNearestPilot); radar = travel-oriented, 60° vision wedge sweeps with twist, red hot box + callsign on contacts; map zoom ± buttons flank the secondary screen.
• Experience gates the hunting aids: viewscreen hot box + hunting-guide arrow appear in STANDARD sim mode only (not veteran/expert); expert mode adds movement heat. (2026-07-18 [T1]: 4.0→4.10 drift — in OUR 4.10 binary the HUD reads NO experience flag (hotbox/arrows are lock-gated in every mode) and movement heat is veteran+expert; full wiring in experience-levels.)
• Cockpit: 5 MFDs (Coolant UL, Engineering top, Hot Box UR, Weapon ×2) + secondary screen with side button columns + EJECT button beside the joystick + per-mech COOLANT LOOP tables (weapons+generators per loop 1-6) and stat sheets (tonnage/armor/reservoir liters/heat sinks/top speeds incl. "Super Charged"). NEW LEADS (manual describes, port lacks input/UI): CROUCH (button by the secondary screen; Mech::duckState attr 0x37 + SQUAT clips exist, nothing drives them), EJECT (sounds exist: EjectButton01_z*.wav), hot-box viewscreen framing (the deferred PNAME marker chain). Per-mech stat tables = a systematic cross-check source for our streamed subsystem resources.

Coolant-loop cross-check RESULT (2026-07-18) [T1] -- STRUCTURE strongly faithful

Dumped each mech's subsystem->loop (subsystem's linked-condenser number, BTCoolingLoopFrame) and diffed vs the manual's COOLANT LOOPS tables. The 4.0->4.10 drift shows here too, but the STRUCTURE is remarkably intact:

• Backbone identical on ALL 6 mechs: Generator A/B/C/D on loops 1/2/3/5, Sensors (our "Avionics") on loop 2, Myomers on loop 5, LRMs on loops 1&3, autocannon on loop 4, the large energy weapon on loop 6 -- match the manual exactly.
• Weapon LOADOUT identical on 5 of 6 (Thor, Vulture, MadCat, Owens, Blackhawk carry the exact same weapon set 4.0->4.10). Loki is the one full rework (4.0 PPC x2 / AFC100 / SRM6 / Medium Laser -> 4.10 AFC50 x2 / ER Medium x2 / SRM4).
• The consistent 4.0->4.10 change: the small energy weapons were REDISTRIBUTED across loops -- the 2 ER Small Lasers moved off the sensor/heavy loops (4.0) onto the energy-weapon loops 4&6 (4.10) on Thor/MadCat/Vulture; SRM/laser placement reshuffled on Blackhawk. Owens is a near-PERFECT match (loops 1&3 exact; only a 4.0 "second myomer set" on loop 2 is absent).
• Loop 0 = correctly UNCOOLED infrastructure (condensers, reservoir, gyro, torso, HUD, searchlight, thermal sight, ammo bins, message manager, mechtech, controls mapper) -- not a loop. CONCLUSION: the coolant-loop reconstruction is faithful; every difference is 4.0->4.10 tuning (loadout rework on Loki, small-laser redistribution elsewhere), NOT a bug. BT_SPEC_LOG (mech4) re-dumps on demand.

Key Relationships

• Renders: gauges-hud (the MFD surfaces), rendering (the main 3D view).
• Input: locomotion (the mapper).
• Bring-up: Phase 8 (get pod specifics from Nick — open-questions).