Fire VISUALS wave: the authored firesmoke sheet, vertex-alpha effect cards, the case-4 wreck dressing

The "fireballs like the demo vids" arc, decomp/content-grounded end to end,
plus the live-play UX batch verified over the same sessions:

FIRESMOKE SHEET (the PFX fireball fix): every firesmokeN_scr_tex in BTFX.VMF
maps the SAME 64x64 tileable noise image bintA (variants differ only in SCROLL
rate) and firesmoke1_mtl colours it through the "fiery" ramp (0.3,0.1,0.1)->
(0.9,0.7,0.3).  The particle layer now bakes ramp(lum(bintA)) as its sprite
colour (noise detail in alpha) and SCROLLS it at firesmoke1's authored rate
via a texture-transform; the port's radial soft-edge mask moved to a second
CLAMPed stage so the WRAPPED scroll rolls flame through the sprite without
scrolling the edge away.  Old grit x radial bake kept as the no-BINTA fallback.
Impact hits, damage-band smoke and death booms all ride this layer.

AUTHORED TEXTURE SCROLL in the model path: the BMF TEXTURE records carry
SPECIAL " SCROLL u0 v0 du dv" (tag 0x2037); the draw path always supported
per-op scrolling (SetTextureScrolling) but the BGF loader never parsed it, so
every scrolling material rendered frozen.  Wired TexRef -> MatInfo -> batch ->
L4TEXOP.doScroll: the flame cards (flamebig/fire5) now roll fire noise.

VERTEX-ALPHA EFFECT CARDS (the "twisted drill bit of fire" fix): FLAMEBIG's
verts carry authored float RGBA -- white-hot base (1.0,0.99,0.97) -> dark-red
tip fading to alpha -0.2 (the DPL clamp convention).  The loader kept a flat
batch colour and drew it OPAQUE = a solid orange spike.  Corpus sweep: exactly
14 shipped BGFs carry vertex alpha, ALL effect cards (flames, MUZFLASH,
EXDISK_A/B/C, TMST_A/B/C, beam models, DECLOUDS).  Such batches now keep the
authored per-vertex gradient and route to the alpha-blend pass, unlit,
colour = texture x gradient, alpha = the vertex fade; sky objects excluded
(drawAsSky + alphaTest passes NEITHER pass filter -- DECLOUDS stays in the
sky pass).  MUZFLASH/EXDISK render correctly for free when the muzzle-model
work lands.

WRECK DRESSING (the 1996 ExplosionScripts case-4 transcription): pieces spawn
HIDDEN and reveal 0.25s after the boom (the InstanceSwitch delay, behind the
dnboom flash); flamebig hangs over the pile, Y-BILLBOARDED at the camera
(SetOffsetYaw + a camera-pos getter -- the dpl_SetDCSReorientAxes analog);
the MakeDCSFall settle arms at the reveal with the two authored rates (hulk/
debris -0.025 t^2, fires -0.01 t^2 -- the flames ride above the sinking pile
and die with it at burial).  EMPTY-PLACEHOLDER hulk guard: THRDBR.BGF is a
153-byte zero-geometry stub that "loads fine" -- vertex-count check now routes
it to the gendbr fallback (a Thor wreck was invisible).  Hulk content census
recorded: AVADBR==MADDBR==VULDBR geometry (palette-only prefix diffs),
RAPDBR==SNDDBR==STIDBR byte-identical -- wreck variety is materials + the
dressing, not unique piles.

LIVE-PLAY BATCH: muzzle resolve uses the named segmentIndex (raw +0xdc read
was layout garbage); forward launch frame (authored MuzzleVelocity +Z vs the
mech's -Z facing); dock-bottom single window (gauge strip appended below the
world viewport, 1100x600 default, BT_DEV_GAUGES_WINDOW=1 restores the separate
window); portrait sec surface unrotated CW; ammo counters live via typed
bridges (BTAmmoBinCountPtr/BTAmmoBinFeeding/BTWeaponAmmoBin -- raw bin+0x180
and a hand-rolled link walk were garbage); fourth fire key ('4' = Pinky);
panel/arc probes de-aliased (%61 prime).

KB: rendering.md (vertex-alpha card family + scroll), combat-damage.md (hulk
census + THRDBR stub), gauges-hud.md (ammo bridges).

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

game/reconstructed/ammobin.cpp

@@ -170,6 +170,21 @@ AmmoBin::~AmmoBin()
 //   to Feeding, reloads the feed timer to feedRate, decrements ammoCount (clamped
 //   at 0) and raises the Empty alarm if that was the last round.
 //
+// Panel bridges (Streak-gauge fix, 2026-07-12): the BallisticWeaponCluster
+// read the bin's rounds via raw `bin+0x180` and the reload state via raw
+// `bin+0x18c` -- the BINARY's offsets, garbage on our compiled layout (the
+// HeatWatcher base sizes differ), so the ammo counter showed a constant and
+// the reload wipe never armed.  Complete-type reads of the NAMED members.
+int *BTAmmoBinCountPtr(void *bin)
+{
+	return (bin != 0) ? &((AmmoBin *)bin)->ammoCount : 0;
+}
+int BTAmmoBinFeeding(void *bin)
+{
+	// "reloading" for the panel = the bin mid-feed (alarm state Feeding).
+	return (bin != 0 && ((AmmoBin *)bin)->ammoAlarm.Level() == AmmoBin::Feeding) ? 1 : 0;
+}
+
 int AmmoBin::FeedAmmo()
 {
 	if (simulationState == 1)							// this+0x40 == 1 (destroyed)