55e4295dc31d3ca6c80a16c8d96d733f8acd99ab
11
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 arcattackandClaude Fable 5
|
bb795e2805 |
MP live-play wave: collision economy, missiles, radar transform, panel polarity, comm ticker
The interactive 2-node playtest wave -- every fix decomp-grounded and live-verified: COLLISION ECONOMY (the ram one-shot): StaticBounce mutates worldLinearVelocity per contact and ProcessCollisionList walks EVERY touched solid per frame; with 2007 terrain-as-solids the reflections compounded x4-x40 within one frame and a walking bump one-shot a pristine mech for 112,375 pts (62-pt authentic economy). Fix: frameEntryWorldVelocity restore per contact (damage always priced at the real approach speed -- all the binary's physics ever saw); Mech::Reset zeroes the mover motion (respawn = teleport); [collide-tx]/[mp-hdlr] telemetry. Gotcha #16 (engine-facility drift class). MISSILES: peer-visible salvos (the launcher record extension carries a salvo counter + aim point; ForceUpdate actually enqueues it -- the dirty flag alone never serialized), the authentic arc (authored MuzzleVelocity vector + the Seeker's 200m/0.1/300 loft + gain-4 steering, decoded from @004beae4/@004bef78), world-impact bursts (rounds detonate on cave geometry instead of phasing through), contact-only damage (flight-cap expiry = fizzle, no more teleport damage), live re-lead, and ballistic (unguided) shells for autocannons. projweap's stale BTPushProjectile extern (the /FORCE signature trap, gotcha #6 corollary) crashed the Avatar's first AFC100 shot -- fixed + sweep rule recorded. RADAR: two transcription bugs made the scope permanently empty -- FUN_0040b244 is the affine INVERSE (not a copy) and FUN_0040adec writes ONLY the 3x3 rotation (never the translation); worldToView now Invert(view) built rotation-first. CulturalIcons sorted out of the moving grid (the phantom red pips were map props), visible-radius culls on all three draw passes, live pip verified at |delta| x ppm px. Gotcha #17 (verify the FUN_ body, not its call shape). WEAPON PANELS (the frozen-dial hunt): the binary's *(subsystem+0x40) means FAILED -- the recon's 'operating' name was backwards, inverting the destroyed-X lamps, the panel look, the children enable and the ready-lamp gate (which had NEVER executed). Polarity chain corrected end-to-end (failedState, fed by real damage saturation). Root cause of the freezes: MFD page-mode gating -- the dev composite shows ALL pages at once, so off-page dials legitimately stopped; under BT_DEV_GAUGES the 15 page-plane bits stay active (the exclusive secondary trio untouched). The SEH gauge guard now names its kills; repaint-heal resets the incremental arc after panel repaints; [panel]/[arc] probes added. COMM/SCORE: MessageBoard LIVE (the engine already shipped the whole Player__StatusMessage queue; wired the binary's one producer -- the kill branch, victim's name, 6s -- plus the consumer bridge and a lazy source bind); MP DEATHS counted via the observed-death tally (each node scores every pilot from locally observed events, the same model as the KILLS credit) and the -2/-1 engine seed clamped for display. DEV UX: node-tagged window titles (-net port), gauge panel reworked (1320x480, true 4:3 MFD cells, the portrait secondary UNROTATED upright, linear filtering, BT_GAUGE_SCALE), fixed close spawns via BT_SPAWN_XZ, Boreas flies an Avatar (first second-chassis live outing). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
fd055281a8 |
Combat: THE AUTHENTIC DAMAGE ECONOMY -- authored per-weapon amounts through the real fire chain (task #8)
Three root causes, all fixed: 1. kDamageScale was 1.0 -- _DAT_004bafbc is an x87 float80 = 1e-7, cancelling the ctor's x1e7: damagePortion = authored DamageAmount x (charge/seekV)^2 (closed form at fire time; madcat AC=25/LRM=50/ERLL=6, bhk1 PPC=12/SRM=35). The observed "0.25" was the degenerate EC=1 fallback, never authored data. 2. CheckFireEdge NaN latch: TriggerState carries ControlsButton INTS; the release value (-65) is a negative NaN. The binary's x87 unordered compare read it as "released"; IEEE-correct float compares latched the edge detector shut after the first release -- the reason the emitter discharge chain NEVER fired in-game. Fixed with bit-pattern sign compares. 3. The weapon-side submission LIVE: Emitter::FireWeapon fills damageData (amount + damageForce=target-muzzle [the gyro directional-bounce feed] + impact) -> MechWeapon::SendDamageMessage (@004b9728 real body) -> messmgr consolidation with per-weapon records + explosion bundling. The mech4 bring-up damage block + flat kShotDamage retired to diag hooks. Bonus: LODReuseHysteresis 0.82 -> 0.33 (double misread). Zone model verified byte-exact (no change). Solo end-to-end: 5-record volleys (2 PPC + 3 ERML with authored amounts), per-weapon zone granularity, explosions, kill. Heat stays bring-up scale pending the heat-calibration audit [T3]. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
04a2049ce2 |
MP task #47: DISPROVE the Entity-layout root cause; correct the record
The prior commit ( |
||
|
arcattackandClaude Fable 5
|
c78662a0f1 |
MP cross-pod damage ROOT-CAUSED: EntityID localID corrupted by hostID on the wire (task #47)
Traced the dispatched-message delivery end to end with BT_MP_NET / BT_MP_FORCE_DMG. Everything works except one wire step: - A's Entity::Dispatch reroutes the replicant's TakeDamage (application->SendMessage(ownerID=3, EntityManager, msg)); POST-Dispatch the message carries entityID=3:22 (host:local) -- the replicant's own ID, matching B's master (GetEntityID()==3:22). VERIFIED sent. - On B the message ARRIVES, GetEntityPointer finds an entity, Posts it, the event drains (ProcessEventTask = ProcessOneEvent(0)), Event::Process runs, Receive finds+calls a handler. VERIFIED the full deliver chain. - BUG: B receives entityID=3:19, NOT 3:22 -- the localID dropped by exactly the hostID (3) between A's send and B's receive. So GetEntityPointer(3:19) returns the WRONG entity (classID 48, not the mech 0xBB9), whose base handler ignores the unaimed hit -> 0 damage. Auto-replicated UPDATE records (msgID 18) arrive with the correct 3:22 and find the mech, so the corruption is specific to the dispatched- message wire path/direction. Next: the host-relative EntityID (de)serialization on the dispatched-msg path (RoutePacket / packet EntityID encoding) -- diff vs the update path which translates correctly. Diagnostics retained (all BT_MP_NET-gated, off in solo -- verified: solo 22 hits, 0 probe noise). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
c0fa6bf21a |
Death = the burning WRECK-HULK swap (effect 104) -- the authentic chain, reconstructed
The user was right: a dead mech turns into a pile of wreckage. The authentic
1995 chain, recovered end-to-end:
kill -> the victim's per-mech DEATH ModelList ('blhdead'/'lokdead'/'owndead'/
'thrdead', .RES ids 22-25) -> its authored effects: 104 (the WRECK script) +
1007 (dnboom big explosion) + 1001 (ddthsmk rubble smoke plume) + a damage-
smoke burst (3/4/5/15).
Effect 104 = ExplosionScripts case 4 (part_008.c:2663, LIVE in the 1996 binary;
the "disabled" warning is case 6): loads the destroyed hulk + flamesml/flamebig
flame meshes with sweep flicker. Every mech ships its hulk (BLHDBR/MADDBR/
LOKDBR/... + GENDBR generic); the 1996 script hardcoded thrdbr.bgf (dev
shortcut) -- we use the victim's own.
Reconstructed as BTL4VideoRenderer::SwapToWreck: hide every segment mesh, hang
"<prefix>dbr.bgf" on the tree root (pending-swap if death precedes tree build);
routed from the engine's ExplosionClassID dispatch (effect 104 ->
BTSwapMechToWreck(explosion->GetEntityHit())). The kill now fires the
authentic 'blhdead' resource (manual 7+1 pfx calls removed -- the list carries
1007/1001 itself). Verified live:
[death] firing authentic death list 'blhdead' id=22
** effect_number = 104
[BTrender] wreck swap: victim -> 'blhdbr.bgf'
Follow-ups noted: mesh flames + hulk settle (cosmetic), DeathSplash.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 4.8
|
4a4ec6855c |
gauge-complete P4e: SectorDisplay reconstructed + registered -> radar SECTOR X/Z read-out LIVE
The "sectorDisplay" cockpit primitive (Secondary overlay, the radar SECTOR X/Z coordinate read-out) was PROSE-ONLY in btl4gau3 (placeholder Make, no ctor/ methodDescription/registration) -> the config line was parse-SKIPPED and never built. Reconstructed byte-verified from the disassembly (ctor @4c9e10, Execute @4ca07c, methodDescription PE-parse): SectorDisplay : GraphicGauge, sizeof 0xC4. Its Execute reads the linked mech's world position and shows two 100-unit sector numerics: numericA = Round(-localOrigin.z * 0.01) + 500 numericB = Round( localOrigin.x * 0.01) + 500 (rounding = round-to-nearest == FUN_004dcd94, corrected from the reviewer's wrong "truncate" claim; 0.01 const PE-verified; -Z/+X axis + fchs confirmed from asm). Overridden slots: LinkToEntity(9) caches the subject, BecameActive(3, non-inactivating), Execute(16) -> satisfies the container-Execute rule. Layout overflow-locked (static_assert sizeof<=0xC4). Make/ctor/dtor mirror the registered PilotList sibling; the config image name is copied (nameCopy) since Execute reads it per-frame. Registered in BTL4MethodDescription[]. VERIFIED LIVE (BT_SECTOR_LOG): Make port=1 pos=(125,579) image=helv15.pcc gridCached=1; Execute -Z=960.4 X=361.6 -> sectorA=510 sectorB=504 (Round(9.6)+500=510, Round(3.6)+500=504 -- authentic 100-unit sectors from live mech position). Gauge composite renders full, no crash. The skip list is now exactly the two remaining widgets (prepEngr x12, messageBoard). Also: a permanent BT_GAUGE_SKIP_LOG diagnostic (GAUGREND.cpp, gated) that logs each unregistered gauge primitive the dev-parse skips -- the tool that pinned this down (earlier "not built" runs were killed before the lazy gauge-renderer init). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
070af409f7 |
gauge wave P1a: publish heat/power/weapon attributes + radar zoom
The gauge-databinding-map workflow found most cockpit gauges resolve NULL because the reconstructed subsystems publish only a fraction of the attributes the config binds. First publishing batch (attribute tables are read-only static data; ids kept a dense prefix from each parent's NextAttributeID): - HeatSink table dense-append: DegradationTemperature/FailureTemperature (the condenser temp-bar warn/max endpoints -- were NULL, so the two-part bars could not scale), NormalizedPressure/DegradationPressure/CoolantMassLeakRate, and the HeatSink link. Condenser/Reservoir inherit this -> all 6 condenser temp bars now resolve current/warn/max (verified: BT_GAUGE_ATTR_LOG all OK). - PoweredSubsystem::GetAttributeIndex() (new) publishes InputVoltage->voltageSource -- the cluster power-branch gate (the power-lamp/generator-voltage/state-lamp sub-branch is skipped when it resolves NULL). Flows to Sensor/Myomers/weapons. - MechWeapon::GetAttributeIndex() (new) publishes OutputVoltage/PercentDone-> rechargeLevel; Emitter/PPC/ProjectileWeapon/MissileLauncher/GaussRifle DefaultData re-pointed at it (they carried an EMPTY default-constructed index -> resolved NOTHING). Verified: the ER MED LASER / PPC / STREAK weapon clusters now render live recharge dials (were blank TEMP/STATUS). - Mech::SetTargetRange un-stubbed (radarRange = range) -> the radar map scale + overlay range readout track the mapper's zoom (was frozen at 1000). - GAUGREND ParseAttribute: env-gated per-binding resolution trace (BT_GAUGE_ATTR_LOG) -- durable diagnostic infra for the wave. Verified DBASE+dev gauges: no startup/gauge-construction crash (dense chain intact), combat un-regressed (TARGET DESTROYED), clusters build with InputVoltage resolving. Remaining config-binding NULLs: HeatSink/AmbientTemperature (aggregate bank, P3) + Searchlight/LightOn (P1b). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
0bceb9a638 |
gauges/map: populate the radar entity grid + draw mech contact blips
Root-caused why the radar showed 0 contacts: the gauge renderer's moving/static entity grids (queried by GetMoving/StaticEntitiesWithinBounds) were NEVER populated -- the 1995 game fed them from ExecuteImplementation's InterestingEntity iterator, which the WinTesla port dropped. Fix (engine): add GaugeRenderer::RebuildEntityGrid() -- Clear + repopulate movingEntities from the world's DynamicMaster + DynamicReplicant entities (the vehicles/mechs; AllEntity would flood the grid with ~300 props/effects/terrain). Called from the map's Execute phase 0 (under the gauge's guarded Execute, so a fault disables only the map). Verified: contacts are now found, combat un- regressed (TARGET DESTROYED), heap-clean under BT_HEAPCHECK. Fix (map): DrawMoving now draws a cross blip for mech-class contacts (0xBB9) when the authentic pip raster set is absent (the BT pip table is stubbed in this engine build). KEY PROJECTION FIX: worldToView is a camera (view->world) matrix and Point3D::Multiply applies only rotation+scale (NOT translation), so projecting the absolute entity position left the viewpoint un-subtracted and the blip landed off-screen (verified: blip @(580,-1154)). Project the RELATIVE position (delta = entity - viewpoint, already computed for the range check) instead -> the blip projects viewpoint-relative + heading-rotated correctly (@(164,221)). radarRange default 500->1000 (1km zoom) so contacts within ~500m show on the radar (SetTargetRange, the real player zoom, is still stubbed). BT_MAP_LOG traces the blip coords. STATE: the grid population + viewpoint-relative blip projection are correct and combat-safe. A reliable on-screen contact demo still needs the display-scale vs spawn-distance reconciliation (the BT_SPAWN_ENEMY dummy sits at a varying, large distance -- 377-828m -- beyond the display radius across runs) + the authentic pip symbol/name/video-object infrastructure (still stubbed). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
fb8c1d6ace |
gauges: colorMapperMultiArmor (worst-of-8-zones) + fix the interpreterTable overflow [widget recon 4]
Reconstructs colorMapperMultiArmor -- tints one schematic colour (a whole torso section) by the WORST of up to 8 damage zones: - MultiArmorConnection (@004c346c/@004c34f4): scans 8 zones via entity->damageZones[idx], keeps the max damageLevel, count==0 ? 100 : Round(worst*100). - ColorMapperMultiArmor::Make/ctor (@004c3c48/@004c3d60): resolves 8 named zones to indices via Entity::GetDamageZoneIndex (13-param methodDescription). ALSO fixes a latent HEAP CORRUPTION that registering this widget exposed (and that would have blocked every further widget): GaugeInterpreter's bytecode buffer is a fixed interpreterTableSize=46864 (GAUGREND.h) tuned for RP's config, and its Insert() bounds guard is a Verify() that compiles out at DEBUG_LEVEL 0. As each BT gauge widget is registered, more of BT's larger L4GAUGE.CFG resolves into bytecode (vs being parse-skipped); colorMapperMultiArmor's 13 params x hundreds of calls pushed the total past 46864 -> silent overflow past the char[] -> heap smash detected later in mission bitmap loading (not the gauge code). Fix: interpreterTableSize -> 262144 (sized for BT's full config). Verified: parses, builds, all zones resolve, no /FORCE unresolved, combat un-regressed (TARGET DESTROYED, 0 crashes), stable. Details: docs/GAUGE_COMPOSITE.md. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
a256813395 |
gauges: secondary/radar MFD composites live on a dev box (Milestone B)
The pod's secondary/radar cockpit surface now renders as an inset in the 800x600 dev window under BT_DEV_GAUGES: radar/tactical grid, SPEED/HEADING/ MAGNETIC/PROP dials, and the color-coded ARMOR DAMAGE mech schematic -- real gauge content (nzSec=27247), composited from the shared CPU pixelBuffer. Composite pass (engine): SVGA16::DrawDevInset palette-expands the secondary plane into a MANAGED texture on the MAIN device and draws an XYZRHW inset quad; BTDrawGaugeInset() reaches the gauge renderer's 'sec' port and is called from DPLRenderer::ExecuteImplementation as the last draw before EndScene. Three reconstruction bugs fixed to get real content: 1. BTL4Application::MakeGaugeRenderer signature mismatch (REAL fix): the reconstructed no-arg override only HID the 2007-engine's widened 3-arg virtual MakeGaugeRenderer(int*,int*,int*), so the engine built a base L4GaugeRenderer whose ctor never parsed gauge/l4gauge.cfg -> empty symbol table -> "undefined label 'bhk1Init'" -> no ports/gauges. Matched the 3-arg signature so it truly overrides (args ignored; BT is fullscreen). Same bug class as the BTL4GaugeRenderer(false,NULL,NULL,NULL) ctor fix. 2. Parse hung on undefined primitives (gated dev accommodation): the BT gauge primitive table (BTL4MethodDescription) is still a stub, so an unknown primitive -> ReportParsingError -> Fail() -> a MODAL dialog freezing the parse. Under BT_DEV_GAUGES, skip the unknown primitive's params so labels register and the base "configure" primitive builds the ports. 3. Gauge widgets AV on NULL data bindings (gated): NumericDisplayScalar's NULL value_pointer -> GaugeConnectionDirectOf ctor deref (bind NULL->static zero); RankAndScore::Execute derefs unreconstructed game state (Gauge::GuardedExecute SEH wrapper -> Disable(True) on first fault). All guards gated on BT_DEV_GAUGES: default DEV un-regressed (TARGET DESTROYED, 0 crashes) and the pod path is byte-unchanged (strict Fail, no guards). Remaining (docs/GAUGE_COMPOSITE.md): the real gauge WIDGET reconstruction (BTL4MethodDescription method table + gauge->game-state data bindings), then Step 2 (RP<->BT MFD port-name reconcile) + Step 3 (2-window layout). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
7b7d465e5e |
Initial commit: bt411 -- standalone Windows BattleTech (Tesla 4.10 port)
Clean, self-contained extraction of the BattleTech-specific work from the
reverse-engineering workspace -- engine + game + content + build, with nothing
from Red Planet or the raw archive dumps. Builds green (Win32) and runs the
single-player drive->animate->target->fire->damage->destroy loop out of the box.
Layout:
engine/ MUNGA + MUNGA_L4 shared 2007 engine, carrying our BT render/loader
work (bgfload/L4D3D/L4VIDEO: BSL bit-slice decode, LOD/ground/shadow
models) + image codec; the minimal rp/ headers the audio HAL needs
game/ reconstructed BT logic + surviving-original BT source + fwd shims
+ WinMain launcher
content/ full runtime tree (BTL4.RES, VIDEO/, GAUGE/, AUDIO/, eggs, BTDPL.INI)
docs/ format specs + reconstruction ledgers
reference/ raw Ghidra pseudocode (recon source-of-truth) + decomp exporter
tools/ MP console emulator + map/resource scanners
One top-level CMake builds munga_engine lib + bt410_l4 game lib + btl4.exe.
All paths relativized (186 fwd shims + ~437 CMake abs paths -> repo-relative);
DXSDK is the one external, overridable via -DDXSDK. Verified: builds to a
byte-identical 2.27MB exe and runs combat (TARGET DESTROYED, 0 crashes) against
the bundled content.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|