F3 distance: alDistanceModel(AL_NONE); restored the commented authored
distance multiply in Dynamic3D::CalculateSourceVolumeScale, added the same
override to Static3D, dropped the (now inert) AL_MAX_DISTANCE writes. Far
battle audio follows the authored knee/rolloff curve again, and the volume
cull / voice steal / ducking chains are distance-aware.
F4 volume law: AL_GAIN = volume_scale^2 at all 3 per-frame sites (Direct/
Dyn3D/Static3D) -- the GM CC7 squared curve; linear was ~+6 dB at mids.
F10 doppler: alDopplerFactor(0) (AL's model ran wrong constants + sign-
inverted velocity: approaching sources pitched DOWN); the AUTHORED
dopplerCents (AUDIO.INI range/speed-of-sound model, decomp-proven consumer
part_008.c:7466) now adds into the Dynamic3D pitch chain.
F15 ConfigureActivePress: published at the MechSubsystem BASE (binary id 2,
descriptor @0x50de5c -> +0x110); renamed the misnamed vitalSubsystemIndex
member (the weapon ConfigureMappables handler already drives it 0/-1).
Removed the invented Sensor/Myomers duplicates and RESTORED their byte-
exact layouts (0x328/0x358 allocs + asserts). MechWeapon's pinned-id pad
absorbed the +1 chain shift -- which matches the binary's own numbering.
F18 cook-off warning: AmmoBin FireCountdownStarted -> the existing
cookOffArmed @0x18C (binary table @0x512600); the countdown klaxon can fire.
F20 zoom blip: L4MechControlsMapper publishes TargetRangeExponent -> the live
@0x1a4 zoom member (own table chained to MechControlsMapper).
KB: replaced the bogus divisionParameters+0x10 rate read with
SystemClock::GetTicksPerSecond() (FUN_0044e19c is GetFrameRate -- original
audio frames were CLOCK TICKS).
Regression (35s drive+fire): stable; ConfigureActivePress binds real on all 9
subsystems (idle -1, zero pad redirects); FireCountdownStarted +
TargetRangeExponent bind live members; attrnull 53 -> 41; chirp still dead;
footfalls still fire (gain now correctly squared).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two real bugs found + fixed chasing the footstep volume:
1. BTL4Application::MakeAudioRenderer read sample_rate from a raw 1995-layout
offset (divisionParameters+0x10) -- the databinding trap: it yielded
-1.6e14 (measured), poisoning Renderer::calibrationRate for the ENTIRE
audio system. Every AudioTime conversion (sequence event scheduling,
compression curve durations, Seconds_To_Frames) was garbage. Sanity-clamp
to the authored 1000 frames/sec default (BT_AUDIO_LOG logs the value).
2. AudioHead::Execute fed audioFrameCount raw OS ticks; now converts
ticks -> calibrated frames via SystemClock::GetTicksPerSecond (1000ms
fallback when the static isn't measured yet), so AudioTime consumers see
the rate they were calibrated for. With rate=1000 + ms ticks the units
now align end-to-end.
Footstep status: chain verified through pulse -> matcher -> Start -> renderer;
the volume mixer's two inputs receive only value-0 AudioControlSequence events
even with correct timing -- the authored event VALUES need decoding next
(sequence tempo/divisions ctor dump; possibly Verify()-stripped tempo garbage
or the events are resets and the true volume rides another control id).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
User reported never hearing any audio. Root-caused: the KB "Audio: DONE" was wrong.
The OpenAL playback chain IS fully implemented (device/buffers/sources; PlayNote
really calls alSourcePlay), but three gaps kept it silent:
1. GATED OFF (the "no sound" root cause): BTL4Application::MakeAudioRenderer returned
NULL unless the pod's AWE_FRONT/AWE_REAR AWE32-card env vars were set -- authentic
1995 pod behavior, dead on modern hardware, so the renderer was NEVER created.
FIXED: default audio ON (BT_NO_AUDIO=1 restores silence; AWE vars still force-on).
Verified: the OpenAL device now opens with no env vars ([audio] device OPENED).
2. Soundbank STUB: allPresets[2][100] (btstubs.cpp) is zero-init -> PRESET_isImplemented
false -> 0 buffers load. Sample data exists (AUDIO1/2.RES: EnginePower/LaserAFire/...)
but the event->sample map is gone (not in the decomp). STILL OPEN.
3. No triggering: the reconstructed game never creates AudioEntities on events. STILL OPEN.
So the device opens but nothing loads/plays yet -- enabling real sound needs the
soundbank reconstructed + the game triggers wired (a proper audio wave). Added a
BT_AUDIO_LOG trace harness across L4AUDRND/L4AUDRES/L4AUDLVL. KB corrected.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Three root causes, all fixed:
1. kDamageScale was 1.0 -- _DAT_004bafbc is an x87 float80 = 1e-7, cancelling
the ctor's x1e7: damagePortion = authored DamageAmount x (charge/seekV)^2
(closed form at fire time; madcat AC=25/LRM=50/ERLL=6, bhk1 PPC=12/SRM=35).
The observed "0.25" was the degenerate EC=1 fallback, never authored data.
2. CheckFireEdge NaN latch: TriggerState carries ControlsButton INTS; the
release value (-65) is a negative NaN. The binary's x87 unordered compare
read it as "released"; IEEE-correct float compares latched the edge
detector shut after the first release -- the reason the emitter discharge
chain NEVER fired in-game. Fixed with bit-pattern sign compares.
3. The weapon-side submission LIVE: Emitter::FireWeapon fills damageData
(amount + damageForce=target-muzzle [the gyro directional-bounce feed] +
impact) -> MechWeapon::SendDamageMessage (@004b9728 real body) ->
messmgr consolidation with per-weapon records + explosion bundling.
The mech4 bring-up damage block + flat kShotDamage retired to diag hooks.
Bonus: LODReuseHysteresis 0.82 -> 0.33 (double misread). Zone model
verified byte-exact (no change). Solo end-to-end: 5-record volleys (2 PPC
+ 3 ERML with authored amounts), per-weapon zone granularity, explosions,
kill. Heat stays bring-up scale pending the heat-calibration audit [T3].
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Add a BT_VSS_LOG diagnostic (Make entry + per-subsystem classID/auxScreen dump +
the ConfigureForModel path). Verified under BT_DEV_GAUGES: the gauge renderer
builds, ConfigureForModel(Init) runs bhk1Init, and VehicleSubSystems::Make is
called with the full 33-subsystem roster -- the dispatcher iterates every
subsystem and its classID switch resolves the displayable types (0xBC3 Sensor,
0xBC6 Myomers, 0xBC8/0xBD4 Emitter/PPC, 0xBCD/0xBD0 Proj/Missile).
CONFIRMED (empirically) the Phase-2 blocker: subsystem[0x1dc] (the aux-screen
position the Make gates on) reads 0xCDCDCDCD (uninitialized) / garbage for the
displayable subsystems -> every panel hits the "Illegal aux screen position"
skip, so nothing renders yet. Phase 2 = populate the aux-screen field from the
subsystem resource. Combat remains un-regressed (the skip path is inert).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The pod's secondary/radar cockpit surface now renders as an inset in the
800x600 dev window under BT_DEV_GAUGES: radar/tactical grid, SPEED/HEADING/
MAGNETIC/PROP dials, and the color-coded ARMOR DAMAGE mech schematic -- real
gauge content (nzSec=27247), composited from the shared CPU pixelBuffer.
Composite pass (engine): SVGA16::DrawDevInset palette-expands the secondary
plane into a MANAGED texture on the MAIN device and draws an XYZRHW inset quad;
BTDrawGaugeInset() reaches the gauge renderer's 'sec' port and is called from
DPLRenderer::ExecuteImplementation as the last draw before EndScene.
Three reconstruction bugs fixed to get real content:
1. BTL4Application::MakeGaugeRenderer signature mismatch (REAL fix): the
reconstructed no-arg override only HID the 2007-engine's widened 3-arg
virtual MakeGaugeRenderer(int*,int*,int*), so the engine built a base
L4GaugeRenderer whose ctor never parsed gauge/l4gauge.cfg -> empty symbol
table -> "undefined label 'bhk1Init'" -> no ports/gauges. Matched the 3-arg
signature so it truly overrides (args ignored; BT is fullscreen). Same bug
class as the BTL4GaugeRenderer(false,NULL,NULL,NULL) ctor fix.
2. Parse hung on undefined primitives (gated dev accommodation): the BT gauge
primitive table (BTL4MethodDescription) is still a stub, so an unknown
primitive -> ReportParsingError -> Fail() -> a MODAL dialog freezing the
parse. Under BT_DEV_GAUGES, skip the unknown primitive's params so labels
register and the base "configure" primitive builds the ports.
3. Gauge widgets AV on NULL data bindings (gated): NumericDisplayScalar's NULL
value_pointer -> GaugeConnectionDirectOf ctor deref (bind NULL->static zero);
RankAndScore::Execute derefs unreconstructed game state (Gauge::GuardedExecute
SEH wrapper -> Disable(True) on first fault).
All guards gated on BT_DEV_GAUGES: default DEV un-regressed (TARGET DESTROYED,
0 crashes) and the pod path is byte-unchanged (strict Fail, no guards).
Remaining (docs/GAUGE_COMPOSITE.md): the real gauge WIDGET reconstruction
(BTL4MethodDescription method table + gauge->game-state data bindings), then
Step 2 (RP<->BT MFD port-name reconcile) + Step 3 (2-window layout).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Clean, self-contained extraction of the BattleTech-specific work from the
reverse-engineering workspace -- engine + game + content + build, with nothing
from Red Planet or the raw archive dumps. Builds green (Win32) and runs the
single-player drive->animate->target->fire->damage->destroy loop out of the box.
Layout:
engine/ MUNGA + MUNGA_L4 shared 2007 engine, carrying our BT render/loader
work (bgfload/L4D3D/L4VIDEO: BSL bit-slice decode, LOD/ground/shadow
models) + image codec; the minimal rp/ headers the audio HAL needs
game/ reconstructed BT logic + surviving-original BT source + fwd shims
+ WinMain launcher
content/ full runtime tree (BTL4.RES, VIDEO/, GAUGE/, AUDIO/, eggs, BTDPL.INI)
docs/ format specs + reconstruction ledgers
reference/ raw Ghidra pseudocode (recon source-of-truth) + decomp exporter
tools/ MP console emulator + map/resource scanners
One top-level CMake builds munga_engine lib + bt410_l4 game lib + btl4.exe.
All paths relativized (186 fwd shims + ~437 CMake abs paths -> repo-relative);
DXSDK is the one external, overridable via -DDXSDK. Verified: builds to a
byte-identical 2.27MB exe and runs combat (TARGET DESTROYED, 0 crashes) against
the bundled content.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
