fd055281a8a24be6541b3d4a2486afa37042e325
7
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
fd055281a8 |
Combat: THE AUTHENTIC DAMAGE ECONOMY -- authored per-weapon amounts through the real fire chain (task #8)
Three root causes, all fixed: 1. kDamageScale was 1.0 -- _DAT_004bafbc is an x87 float80 = 1e-7, cancelling the ctor's x1e7: damagePortion = authored DamageAmount x (charge/seekV)^2 (closed form at fire time; madcat AC=25/LRM=50/ERLL=6, bhk1 PPC=12/SRM=35). The observed "0.25" was the degenerate EC=1 fallback, never authored data. 2. CheckFireEdge NaN latch: TriggerState carries ControlsButton INTS; the release value (-65) is a negative NaN. The binary's x87 unordered compare read it as "released"; IEEE-correct float compares latched the edge detector shut after the first release -- the reason the emitter discharge chain NEVER fired in-game. Fixed with bit-pattern sign compares. 3. The weapon-side submission LIVE: Emitter::FireWeapon fills damageData (amount + damageForce=target-muzzle [the gyro directional-bounce feed] + impact) -> MechWeapon::SendDamageMessage (@004b9728 real body) -> messmgr consolidation with per-weapon records + explosion bundling. The mech4 bring-up damage block + flat kShotDamage retired to diag hooks. Bonus: LODReuseHysteresis 0.82 -> 0.33 (double misread). Zone model verified byte-exact (no change). Solo end-to-end: 5-record volleys (2 PPC + 3 ERML with authored amounts), per-weapon zone granularity, explosions, kill. Heat stays bring-up scale pending the heat-calibration audit [T3]. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
77190c93e5 |
Combat: the AUTHENTIC consolidated damage delivery -- TakeDamageStream through the message manager (task #7 tail)
ConsolidateAndSendDamage @0049b784 fully implemented: the beam path submits
into AddDamageMessage; each messmgr tick builds ONE Entity::
TakeDamageStreamMessage (id 0x13; wire-verified 0x34+4+Nx12) with the
common impact record + appended {type, amount, subsystemID} entries and
Dispatches it at the victim -- the T0 handler (ENTITY.cpp:817) re-splits
into per-record TakeDamage; replicants reroute cross-pod. Real
ResolveExplosionID (firing weapon's +0x3E4, guarded) + SubmitExplosion via
the Explosion::Make port; TWO chain-purge bugs fixed (the "iterator dtor
clears it" assumption was wrong -- records re-applied every tick, observed
1->2->3->4 double-counting). @004b9728 identity corrected (SendDamageMessage,
not DrawWeaponPip). Verified solo: 25 clean single-record consolidations ->
kill -> death transition. Residue: weapon-side submission awaits the
damage-economy reconciliation (authored 0.25-scale vs kShotDamage=12).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
|
8ed6184d65 |
Combat: AUTHENTIC weapon groups -- streamed per-mech button bindings + the real fire chain (task #5)
The recovered system: fire channels = LBE4ControlsManager buttonGroups (0x40/0x45/0x46/0x47); default groups = the per-mech type-6 controls-map resource in BTL4.RES, installed by the T0 CreateStreamedMappings the port already called -- it needed only the TriggerState attribute (id 0x13 PINNED to the binary value; fireImpulse@0x31C is the binary's TriggerState) and an input feed. Keyboard/harness now push press/release edges into the button groups; the gBT*Trigger bypasses, per-type keyboard split and 1,0 pulse hack are retired -- weapons sharing a button fire TOGETHER (madcat Trigger = 4 weapons). Myomers @4b9550/@4b95b8 misattribution corrected (they are MechWeapon ConfigureMappables/ChooseButton). Verified 2-node: kill through the authentic chain (12 hits vs ~36 pre-groups). Config-mode session (regrouping UI) = the remaining stage, KB-scoped. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
29035028fd |
Cross-pod beams: replicate emitter discharge via subsystem update records
User report: lasers only visible on the window firing them. The peer's replicant emitters never learned the master fired. THE AUTHENTIC PIPE (decomp-verified): - FUN_0041c350 (the "beam keepalive" ServiceDischarge/ContinueDischarge call) does TWO things: queue the LOCAL deferred beam-effect callback (@0x4bac0c) on the app+0x34 manager -- our per-weapon render walk already plays that role -- and set the subsystem DIRTY bit, which maps to the 2007 engine's updateModel / ForceUpdate(). - Replication rides SUBSYSTEM UPDATE RECORDS inside the mech's update message: the roster walk already hands the entity's stream to every subsystem's PerformAndWatch; Simulation::WriteSimulationUpdate serializes each requested updateModel bit; Entity::UpdateMessageHandler routes received records by subsystemID to the subsystem's ReadUpdateRecord. All engine machinery -- the missing pieces were the Emitter's serialize/apply pair + the triggers. CORRECTIONS to the dormant task-33-era transcriptions (never exercised -- nothing ever set updateModel -- so the latent misreads never surfaced): - The weapon-family VTABLE SLOT MAP was swapped: slot 6 = ReadUpdateRecord, 7 = WriteUpdateRecord, 9 = TakeDamage (evidence: Mech hierarchy symmetry + body semantics; @004ba568 resolves an EntityID at rec+0x30 through the entity index -- record semantics, not Damage). Renamed across MechWeapon / Emitter / ProjectileWeapon; the real Emitter::TakeDamage @004bafc8 is undecoded (inherits MechWeapon for now). - Emitter/MechWeapon Write: `*record = 0x38/0x18` is the record LENGTH, not recordID; rec+0x30 is the TARGET's EntityID (GetEntityID()), not a colour -- the old `CopyColor(targetEntity+0x184)` was also a databinding trap. - OVERRIDE-SIGNATURE TRAP: the decls used each class's own shadowing UpdateRecord typedef as the param type, silently NOT overriding the engine virtual (the base ran instead; nothing would ever have serialized). Base-typed params (Simulation__UpdateRecord*), casts inside. - Emitter::ReadUpdateRecord reconstructed (@004ba568): target EntityID resolve (drop unknown non-null targets), MechWeapon alarm apply chain, beam fields. - ServiceDischarge/ContinueDischarge: ForceUpdate() per keepalive tick + one final record at beam end (turns the peer's beam off). - Mech::DrawWeaponBeams extracted from the player-only drive block so the walk runs for REPLICANTS (+ per-mech gun-port cache -- the process-wide statics would have served the player's segment pointers as the replicant's muzzles). VERIFIED 2-node: A fires 57 volleys -> 225 emitter records -> B applies all 225 -> B draws 414 beams (PPC blue / laser red, from A's replicant's own gun ports). Solo un-regressed (150 beams, kill chain, no crash). Also preserved: the full Mech::WriteUpdateRecord @0x4a0c2c recovery (reference/decomp/mech_writeupdate_004a0c2c.disasm.txt) with all 9 record types decoded (pose/alarm/leg-state+heat with the body-channel write-through re-sync, knockdown, death, impact, movementMode) -- transcription deferred; it replicates remote knockdown/death/heat and was not needed for beams. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
070af409f7 |
gauge wave P1a: publish heat/power/weapon attributes + radar zoom
The gauge-databinding-map workflow found most cockpit gauges resolve NULL because the reconstructed subsystems publish only a fraction of the attributes the config binds. First publishing batch (attribute tables are read-only static data; ids kept a dense prefix from each parent's NextAttributeID): - HeatSink table dense-append: DegradationTemperature/FailureTemperature (the condenser temp-bar warn/max endpoints -- were NULL, so the two-part bars could not scale), NormalizedPressure/DegradationPressure/CoolantMassLeakRate, and the HeatSink link. Condenser/Reservoir inherit this -> all 6 condenser temp bars now resolve current/warn/max (verified: BT_GAUGE_ATTR_LOG all OK). - PoweredSubsystem::GetAttributeIndex() (new) publishes InputVoltage->voltageSource -- the cluster power-branch gate (the power-lamp/generator-voltage/state-lamp sub-branch is skipped when it resolves NULL). Flows to Sensor/Myomers/weapons. - MechWeapon::GetAttributeIndex() (new) publishes OutputVoltage/PercentDone-> rechargeLevel; Emitter/PPC/ProjectileWeapon/MissileLauncher/GaussRifle DefaultData re-pointed at it (they carried an EMPTY default-constructed index -> resolved NOTHING). Verified: the ER MED LASER / PPC / STREAK weapon clusters now render live recharge dials (were blank TEMP/STATUS). - Mech::SetTargetRange un-stubbed (radarRange = range) -> the radar map scale + overlay range readout track the mapper's zoom (was frozen at 1000). - GAUGREND ParseAttribute: env-gated per-binding resolution trace (BT_GAUGE_ATTR_LOG) -- durable diagnostic infra for the wave. Verified DBASE+dev gauges: no startup/gauge-construction crash (dense chain intact), combat un-regressed (TARGET DESTROYED), clusters build with InputVoltage resolving. Remaining config-binding NULLs: HeatSink/AmbientTemperature (aggregate bank, P3) + Searchlight/LightOn (P1b). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
|
9d82be46a1 |
P7: subsystem-tree alarm unification -- the whole PoweredSubsystem weapon/power subtree is byte-exact
The reconstruction modeled the binary's 0x54 AlarmIndicator (FUN_0041b9ec) with undersized
stand-ins (AlarmIndicator==ReconAlarm==4B; HeatAlarm==8B) across the entire subsystem tree, so
every field above an alarm sat at the wrong compiled offset. Retype every such stand-in to
GaugeAlarm54(0x54) and de-phantom each class against its ctor, so the whole PoweredSubsystem
subtree becomes byte-exact. An 8-agent read-only decomp-mapping workflow decoded every ctor
first; then hands-on implementation. static_assert-locked chain (verified vs the raw ctors):
HeatSink 0x1D0
-> PoweredSubsystem 0x31C retype electricalStateAlarm@0x264 + modeAlarm@0x2B8 @004b0f74
-> MechWeapon 0x3F0 retype weaponAlarm@0x350; delete 5 phantom tail fields @004b99a8
-> Emitter 0x478 delete outputVoltage/beamLengthRatio/firingArmed aliases
+ beamHit*/beamColor/beamHitData/energyRampTime phantoms;
retype beamOrientation EulerAngles->Quaternion(16B) @004bb120
-> PPC 0x478 (no own fields) @004bb888
PoweredSubsystem -> Sensor 0x328 (no alarm; 3 own fields) @004b1d18
PoweredSubsystem -> Myomers 0x358 (no alarm) @004b8fec
New systemic bug-class instances fixed (added to the CLAUDE.md checklist):
* alias field - Emitter outputVoltage==inherited rechargeLevel@0x320; beamLengthRatio==
beamScale.z@0x434; firingArmed==inherited useConfiguredPip@0x3E0
* phantom field - MechWeapon segmentReference/pipSegment/hasTarget/targetPoint/muzzlePoint
(past 0x3F0); Emitter beamHitPoint/beamImpact/beamImpactScalar/beamColor/
beamHitData/energyRampTime (binary writes inherited damageData/voltageScale
or the value is a method local)
Non-layout fixes required in the same wave:
* outputVoltage->rechargeLevel also in the compiled GAUSS.CPP:74/93 (external readers of the
removed Emitter field -- must grep EVERY TU, not just the class's own .cpp)
* MechWeapon::GetMuzzlePoint reimplemented faithfully (removed muzzlePoint collided with
Emitter's own fields at 0x3F0) via a BTResolveWeaponMuzzle void* bridge in mech4.cpp,
resolving the weapon's mount segment (inherited this+0xdc) through the owner segment table
* DetachFromVoltageSource fixed to set electricalStateAlarm not modeAlarm (raw @004b0e30
writes the 0x264 alarm)
The vehicleSubSystems aux-screen gauge raw reads (btl4gau2.cpp:868/952 at subsystem+0x2b8/+0x278)
and the Sensor RadarPercent path now read the CORRECT byte offsets (garbage under the short layout).
Verified: combat DESTROYED-in-8, 28 shots, 0 crashes, heat heatEnergy=1.34e7, every static_assert
lock passes, heapcheck-clean through construction (the phase the isolated PoweredSubsystem retype
had overflowed). LESSON: a factory-bridge runtime Check(sizeof<=alloc) does NOT fail the build --
only a static_assert sizeof lock catches alloc overflow at compile time.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
|
7b7d465e5e |
Initial commit: bt411 -- standalone Windows BattleTech (Tesla 4.10 port)
Clean, self-contained extraction of the BattleTech-specific work from the
reverse-engineering workspace -- engine + game + content + build, with nothing
from Red Planet or the raw archive dumps. Builds green (Win32) and runs the
single-player drive->animate->target->fire->damage->destroy loop out of the box.
Layout:
engine/ MUNGA + MUNGA_L4 shared 2007 engine, carrying our BT render/loader
work (bgfload/L4D3D/L4VIDEO: BSL bit-slice decode, LOD/ground/shadow
models) + image codec; the minimal rp/ headers the audio HAL needs
game/ reconstructed BT logic + surviving-original BT source + fwd shims
+ WinMain launcher
content/ full runtime tree (BTL4.RES, VIDEO/, GAUGE/, AUDIO/, eggs, BTDPL.INI)
docs/ format specs + reconstruction ledgers
reference/ raw Ghidra pseudocode (recon source-of-truth) + decomp exporter
tools/ MP console emulator + map/resource scanners
One top-level CMake builds munga_engine lib + bt410_l4 game lib + btl4.exe.
All paths relativized (186 fwd shims + ~437 CMake abs paths -> repo-relative);
DXSDK is the one external, overridable via -DDXSDK. Verified: builds to a
byte-identical 2.27MB exe and runs combat (TARGET DESTROYED, 0 crashes) against
the bundled content.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|