;---------------------------------------------------------------------------------
; PROTOCOL.INI of Linksys LNEPCI/100TX Ethernet Adapter
;---------------------------------------------------------------------------------
; Description :
;       Drivername = LNEPCI$
;
;       Data_Rate = MB10  --> 10M  bps
;                   MB100 --> 100M bps
;          This parameter specifies the configuration of data rate of
;          the network adapter .
;          If Data_Rate does not specified , it will auto detect
;          the Data rate .
;
;       SLOT =  16
;          This parameter specifies the slot number used for notifications.
;          For PCI slot , you can specify from 16 to 26.
;
;       SIA_MODE = AUTODETECT     --> Auto detect the media type
;                  TP             --> Media type is UTP
;                  TP_FULL_DUPLEX --> Media type is UTP and Full-duplex
;                  BNC            --> Media type is BNC
;          This parameter specifies the connector type configuration of
;          the network adapter card .
;------------------------------------------------------------------------------


        DriverName = LNEPCI$