rem
rem *** All boot disks need this stuff ***
rem
mkdir a:\vgl_labs
mkdir a:\vgl_labs\thispod
rem
rem *** This is the setup.bat file we are using for this release
rem
copy c:\vgl_labs\REL1_20.BAT  a:\vgl_labs
rem
rem *** These are the required batch files
rem
copy c:\vgl_labs\LABS1.BAT    a:\vgl_labs 
copy c:\vgl_labs\LABS2.BAT    a:\vgl_labs
copy c:\vgl_labs\LABS3.BAT    a:\vgl_labs
copy c:\vgl_labs\CR           a:\vgl_labs
copy c:\vgl_labs\GO.BAT       a:\vgl_labs
rem
rem *** These are some optional batch files that may be useful for ***
rem *** setup and debugging of a pod if you have a keyboard        ***
rem
copy c:\vgl_labs\LABUP.BAT    a:\vgl_labs
copy c:\vgl_labs\RP.BAT       a:\vgl_labs
copy c:\vgl_labs\BT.BAT       a:\vgl_labs
copy c:\vgl_labs\CLEARLOG.BAT a:\vgl_labs
copy c:\vgl_labs\CAMERA.BAT   a:\vgl_labs
copy c:\vgl_labs\REVIEW.BAT   a:\vgl_labs
copy c:\vgl_labs\NETON.BAT    a:\vgl_labs
copy c:\vgl_labs\NETOFF.BAT   a:\vgl_labs
copy c:\vgl_labs\NTON.BAT     a:\vgl_labs
copy c:\vgl_labs\NTOFF.BAT    a:\vgl_labs
rem
rem *** This file handles the installation to the pod's hard drive
rem
copy c:\vgl_labs\loadpod.POD a:\vgl_labs\thispod\loadpod.bat
rem
rem *** These are the standard config.sys and autoexec.bat files
rem
copy c:\vgl_labs\autoexec.POD a:\vgl_labs\thispod\autoexec.bat
copy c:\vgl_labs\config.POD   a:\vgl_labs\thispod\config.sys
copy c:\vgl_labs\autoexec.POD a:\autoexec.bat
copy c:\vgl_labs\config.POD   a:\config.sys
echo a:\vgl_labs\thispod\loadpod.bat>>a:\autoexec.bat
echo c:\vgl_labs\thispod\bootpod.bat>>a:\vgl_labs\thispod\autoexec.bat
rem
rem *** One of several BOOTPOD.BAT files is copied over depending on 
rem *** what type of install disk this is making first we copy over the
rem *** name of the release file, then the right setup.
rem
echo CALL REL1_20.BAT>a:\vgl_labs\thispod\bootpod.bat

if "%1"=="pod" goto pod
if "%1"=="ntscreview" goto ntscreview
if "%1"=="svgareview" goto svgareview
echo You must type MAKEBOOT followed by pod, ntscreview, or svgareview
goto exit

:pod
type c:\vgl_labs\bootpod.1>>a:\vgl_labs\thispod\bootpod.bat
goto step2

:ntscreview
type c:\vgl_labs\bootpod.2>>a:\vgl_labs\thispod\bootpod.bat
goto step2

:svgareview
type c:\vgl_labs\bootpod.3>>a:\vgl_labs\thispod\bootpod.bat
goto step2

:step2
:exit