CydandClaude Fable 5
504aef88d4
Un-ignored: this is the working copy the emulator actually boots (patched BTL4OPT.EXE v4 lineage + .orig/.nop14/.pre_idle/.pre_limit backups, TESTARN.EGG arena1 test egg, REL410 BT+RP trees, VGL_LABS pod boot bats, VWETEST factory test suites, SB16 Creative utilities). The pristine untouched image remains ALPHA_1.zip. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
40 lines
1.6 KiB
Plaintext
40 lines
1.6 KiB
Plaintext
MONITOR SYNC ADJUSTMENT, ASPECT RATIO AND POSITION TESTS.
|
|
- For Secondary Screen adjustment:
|
|
|
|
Horizontal sync adjustment is only nessary if the image scrolls durning
|
|
test 0. Turn the pad VR701(H. HOLD-located on the main board) in both
|
|
directions untill the screen rolls. Set the Pad in the center of this
|
|
range.
|
|
|
|
Vertical sync adjustment is only nessary if the image scrolls durning
|
|
test 1. Turn the pad VR600(V. HOLD-located on the main board) in both
|
|
directions untill the screen rolls. Set the Pad in the center of this
|
|
range.
|
|
|
|
To adjust horizontal position use pad VR700(H. Phase-located second from
|
|
the top on the overhead panel) on the Secondary Monitor control board.
|
|
|
|
To adjust vertical position use pad VR603(V. Center-located second from
|
|
the top on the overhead panel) on the Secondary Monitor control board.
|
|
|
|
To adjust aspect ratio use pads VR601(V. SIZE) and, VR704(H. SIZE) on the
|
|
Secondary Monitor control board.
|
|
|
|
- For Auxiliary Monitor adjustment:
|
|
|
|
Horizontal sync adjustment is only nessary if the image scrolls durning
|
|
test 0. Turn the pad R708(H. HOLD-located on the main board) in both
|
|
directions untill the screen rolls. Set the Pad in the center of this
|
|
range.
|
|
|
|
Adjusting the vertical sync on auxiliary monitory is not possible.
|
|
|
|
To adjust horizontal position use pad R705(H. Phase-located on main board).
|
|
|
|
To adjust vertical position use pad R613(V. Center-located on main board).
|
|
|
|
To adjust aspect ratio use pad R606(V. Height-located on the main board).
|
|
|
|
Horizontal Height is not availabe on this monitor.
|
|
|
|
PRESS C - To Display Calibration Menu. |