TeslaRel410/emulator/vpx-device

VPX + AWE32 devices — DOSBox-X integration

Our original source for the emulated pod hardware. Kept here under version control because the DOSBox-X source tree itself (emulator/src/, ~490 MB) is git-ignored.

• vpxlog.cpp — the Division VPX link adapter (INMOS C012 at I/O base 0x150), grown through Phase 3: iserver handshake responder, FIFO scene decode, GL Division renderer (gallery shading model), VDB video-head splitter windows. RIO lamp/button bezel (B2, 2026-07-24, explode layout): pal_draw rings each mono-MFD head with its 8 RIO buttons (red, 4 top / 4 bottom, tucked under a 640x500 display so a 10px lip shows) and the radar with the amber Secondary/Screen side columns + a centered bottom indicator strip, lit from serialrio's RIO_GetPanelState (off/dim/bright + white-hot press; flashing lamps blink at the RioLampState rate). No labels -- the display shows each button's function. Click-to-press: rt_wndproc hit-tests a click against the bezel and presses that RIO address (thread-safe via serialrio's queued RIO_HostButton); head windows are WS_EX_NOACTIVATE so a click never pulls foreground off DOSBox (which would demote the emu thread and stop the SDL pad poll). No-op when no serial=rio port is present.
• vweawe.cpp — the dual-AWE32 sound device: two vendored EMU8000 cores at 0x620/0x640 (+0x400/+0x800 triplets), rear-card DSP/mixer stub at 0x240, autonomous render thread with direct winmm output. Needs the GM ROM (emulator/roms/awe32.raw) via VWE_AWE_ROM or SoundFont uploads are refused (banks declare irom=1MGM). See emulator/SOUND-NOTES.md.
• emu8k.cpp / emu8k.h / emu8k_shim.h — EMU8000 wavetable core vendored from 86Box (GPL-2.0-or-later, same license as DOSBox-X), with a minimal shim; local changes are listed in the emu8k.cpp header.
• serialnamedpipe.cpp / serialnamedpipe.h — serial<n>=namedpipe pipe:<name> backend (2026-07-12): serial-over-named-pipe for vRIO/vPLASMA, replacing com0com. DOSBox is the pipe CLIENT with 500ms background retry; typed frames carry data (0x00 len bytes) and DTR/RTS line state (0x01 bits); the full wire contract is in the header comment (pinned with the vRIO session). Supports the directserial rxpollus/rxburst/rxdelay low-latency knobs. Smoke-tested end-to-end 2026-07-12.
• serialrio.cpp / serialrio.h — serial<n>=rio backend (2026-07-21, keyboard field 2026-07-22): the cockpit RIO board emulated in-fork. It speaks the device side of the RIO 9600-8N1 protocol straight to the game's UART (no external process, no pipe) and sources pilot input from an SDL game controller + the host keyboard inside the emulator. Because the game↔board round trip is in-process at the emulated UART's own cadence — like the real ISA UART on a pod — the serial round-trip dropouts (livelock, TXMAXIDLE, rxburst, 15s retry) can't occur. The protocol state machine + input mapping are transcribed from the validated vRIO app (C:\VWE\vrio VRio.Core: VRioDevice, the Protocol codec, Input/InputRouter + BindingProfileFormat); the transport, wire pacer, panel UI and thread locks are dropped (single emulator thread). RX byte pacing reuses directserial's state machine (same rxpollus/rxburst knobs), draining a queue the board itself fills. Keyboard field (B1): sdlmain offers every SDL key to RIO_HostKeyEvent() first; while capture is ON (default) bound keys press RIO addresses or drive axes and are swallowed; unbound keys and Ctrl/Alt/Gui chords pass through (host hotkeys keep working; modifier keys BOUND as inputs are exempt from the chord rule). Default field: number/QWERTY rows = upper MFD bank, home/bottom rows = lower bank, F1–F12 = Secondary/Screen, arrows+Space = hat+main, and keyboard FLIGHT controls (operator 2026-07-22): numpad 8/2/4/6 = stick, 7/9 = pedals, LShift/LCtrl = throttle slew ±0.7/s, numpad-5 = throttle zero; the internal keypad is unbound (mission-review plumbing only). PAUSE or SCROLL LOCK toggles capture panel↔DOS (toggling off releases everything; needed at the netnub loop / DOS prompts); togglekey:<sdl-name> adds a third toggle key for keyboards lacking both. Focus loss releases held keys (RIO_HostFocusLost in GFX_LosingFocus). A bindings file in vRIO's grammar REPLACES the default profile (conf bindings:<path>, else env VWE_RIO_BINDINGS; key-axis modes deflect|slew|rate|set, sign may be a separate token; vRIO's .NET key names are aliased so a vRIO bindings.txt ports over). Conf: serial1=rio [pad:<n>] [inverty] [bindings:<path>] [togglekey:<key>] [rxpollus:<us>] [rxburst:<n>]. Additive — real pods keep directserial realport:COM1; vRIO-over-pipe keeps namedpipe pipe:vrio. Confs: net_loop_rio.conf / net_rp_rio.conf; pod-launch --rio. B0 (pad) LIVE-CONFIRMED 2026-07-22 from the repacked dist; keyboard-field live test pending.

Applying to a DOSBox-X source checkout

Tested against DOSBox-X v2026.06.02, MSYS2 mingw64.

1. Copy the devices in:

   cp emulator/vpx-device/vpxlog.cpp   emulator/src/src/hardware/
   cp emulator/vpx-device/emu8k.cpp    emulator/src/src/hardware/
   cp emulator/vpx-device/emu8k.h      emulator/src/src/hardware/
   cp emulator/vpx-device/emu8k_shim.h emulator/src/src/hardware/
   cp emulator/vpx-device/vweawe.cpp   emulator/src/src/hardware/
   

2. Add them to the hardware build — in src/src/hardware/Makefile.am, append vpxlog.cpp emu8k.cpp vweawe.cpp to libhardware_a_SOURCES (we inserted them after glide.cpp; if you edit the generated Makefile/Makefile.in by hand instead of re-running automake, also mirror the $(OBJEXT) list, the .Po depfile list, and the depfile include markers — grep for how vpxlog appears and copy the pattern).
3. Call the inits — in src/src/gui/sdlmain.cpp, declare void VPXLOG_Init(); and void VWEAWE_Init(); next to the other *_Init() prototypes; call VPXLOG_Init(); right after GLIDE_Init(); and VWEAWE_Init(); right after SBLASTER_Init(); (it needs the mixer initialized). 3b. The namedpipe serial backend:

   cp emulator/vpx-device/serialnamedpipe.cpp emulator/src/src/hardware/serialport/
   cp emulator/vpx-device/serialnamedpipe.h   emulator/src/src/hardware/serialport/
   

   plus four small stock edits:
   • src/src/hardware/serialport/Makefile.am: append serialnamedpipe.cpp serialnamedpipe.h to libserial_a_SOURCES (same generated-Makefile caveat as step 2).
   • src/include/serialport.h: add SERIAL_TYPE_NAMED_PIPE to SerialTypesE under #if defined(WIN32) (before SERIAL_TYPE_DIRECT_SERIAL).
   • src/src/hardware/serialport/serialport.cpp: #include "serialnamedpipe.h"; add the type=="namedpipe" case to BOTH dispatch switches (SERIALPORTS ctor + the SERIAL command) and "namedpipe" to the serialTypes[] string table — grep for how "file" appears and copy the pattern.
   • src/src/dosbox.cpp: add "namedpipe" to the serials[] allowed-values list (without this the config parser silently falls back to dummy). 3c. The in-fork RIO serial backend (needs SDL2 — the whole-program link already pulls SDL2 in, and the vendored SDL2 include dir is on the global compile flags, so no per-subdir cflag edits):

   cp emulator/vpx-device/serialrio.cpp emulator/src/src/hardware/serialport/
   cp emulator/vpx-device/serialrio.h   emulator/src/src/hardware/serialport/
   

   plus the same four stock edits as the namedpipe backend:
   • src/src/hardware/serialport/Makefile.am: append serialrio.cpp serialrio.h to libserial_a_SOURCES (same generated- Makefile caveat as step 2).
   • src/include/serialport.h: add SERIAL_TYPE_RIO to SerialTypesE (UNguarded — SDL is cross-platform, unlike the WIN32-only namedpipe; placed right after SERIAL_TYPE_MOUSE).
   • src/src/hardware/serialport/serialport.cpp: #include "serialrio.h"; add the type=="rio" case to BOTH dispatch switches and "rio" to the serialTypes[] string table (copy the namedpipe pattern; keep it unguarded).
   • src/src/dosbox.cpp: add "rio" to the serials[] allowed-values list.
   • src/src/gui/sdlmain.cpp (the B1 keyboard field, three small edits): (a) declare the hooks above GFX_LosingFocus: bool RIO_HostKeyEvent(int sdl_scancode, bool pressed, bool repeat, unsigned int sdl_mods); void RIO_HostFocusLost(void); (b) call RIO_HostFocusLost(); inside GFX_LosingFocus right after MAPPER_LosingFocus(); (c) in GFX_Events' SDL2 case SDL_KEYDOWN: case SDL_KEYUP: block, right after the SCREEN_GAMELINK early-out, offer the event to RIO_HostKeyEvent((int)event.key.keysym.scancode, event.type == SDL_KEYDOWN, event.key.repeat != 0, event.key.keysym.mod) and break; when it returns true (consumed keys must never reach the mapper).
4. Build:

   cd emulator/src
   ./build-mingw-sdl2 --enable-debug=heavy
   

   Output: src/src/dosbox-x.exe.

Running

set VPXLOG=C:\VWE\TeslaRel410\emulator\vpxlog.txt
emulator\src\src\dosbox-x.exe -conf emulator\capture.conf
python emulator\analyze_capture.py

With VPXLOG unset the device is inert and the build behaves like stock DOSBox-X.