CydandClaude Opus 4.8
1e2ec12f11
Converts the Launcher Service + Agent from net8/win-x64 self-contained to net48 framework-dependent, and makes Tesla.Contract net48-only (drops multi-targeting). Both consumers (Console + Launcher) are now a single TFM. Code changes for net48 (the only net8/netstandard2.1 APIs in use): - RandomNumberGenerator.Fill -> RandomNumberGenerator.Create().GetBytes (3x) - TcpListener.AcceptTcpClientAsync(ct) -> AcceptTcpClientAsync() + stop-on-cancel - byte[].AsSpan().SequenceEqual -> Linq SequenceEqual (no System.Memory) (2x) - PipeStream.Write(byte[]) / WriteAsync(byte[],ct) -> explicit (buf,0,len[,ct]) - Math.Clamp -> Math.Max/Min The generic host (Microsoft.Extensions.Hosting 8.x + UseWindowsService) runs on net48 unchanged. build.bat/install.bat updated for the folder-of-DLLs deploy; solution platform reverted x64 -> AnyCPU. RESULT — package size: ~3.7 MB on disk / 1.58 MB zipped, vs ~213 MB / 91 MB for the net8 self-contained build (~50-58x smaller). net48 ships in Win10/11 so no runtime prerequisite. 73 tests green; NOT re-validated on a live pod. Spike branch for evaluation — do not merge without a pod re-test. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
276 lines
13 KiB
Batchfile
276 lines
13 KiB
Batchfile
@echo off
|
|
:: =============================================================================
|
|
:: TeslaLauncher Modern — Installation Script
|
|
:: =============================================================================
|
|
:: Run as Administrator on each cockpit PC.
|
|
:: Must be run from the TeslaLauncher\ folder produced by build.bat:
|
|
::
|
|
:: TeslaLauncher\
|
|
:: install.bat <- this file
|
|
:: Service\
|
|
:: TeslaLauncherService.exe
|
|
:: Agent\
|
|
:: TeslaLauncherAgent.exe
|
|
:: oalinst.exe
|
|
:: dx9201006\
|
|
:: DXSETUP.exe
|
|
:: =============================================================================
|
|
|
|
setlocal enabledelayedexpansion
|
|
|
|
echo ============================================================
|
|
echo Tesla Launcher v0.1 - Installation
|
|
echo ============================================================
|
|
echo.
|
|
|
|
:: ── Paths ─────────────────────────────────────────────────────────────────────
|
|
set ROOT=%~dp0
|
|
set SERVICE_SRC=%ROOT%Service
|
|
set AGENT_SRC=%ROOT%Agent
|
|
set INSTALL_DIR=C:\Program Files\TeslaLauncher
|
|
set DATA_DIR=C:\ProgramData\TeslaLauncher
|
|
set SERVICE_EXE=%INSTALL_DIR%\TeslaLauncherService.exe
|
|
set AGENT_EXE=%INSTALL_DIR%\TeslaLauncherAgent.exe
|
|
set SERVICE_NAME=Tesla Application Launcher
|
|
set SERVICE_DISPLAY=Tesla Application Launcher
|
|
set CONSOLE_PORT=53290
|
|
|
|
:: ── Admin check ───────────────────────────────────────────────────────────────
|
|
net session >nul 2>&1
|
|
if %errorlevel% neq 0 (
|
|
echo ERROR: This script must be run as Administrator.
|
|
pause & exit /b 1
|
|
)
|
|
|
|
:: ── Verify source files ───────────────────────────────────────────────────────
|
|
if not exist "%SERVICE_SRC%\TeslaLauncherService.exe" (
|
|
echo ERROR: TeslaLauncherService.exe not found in %SERVICE_SRC%
|
|
echo Run build.bat first, then run install.bat from the TeslaLauncher\ folder.
|
|
pause & exit /b 1
|
|
)
|
|
if not exist "%AGENT_SRC%\TeslaLauncherAgent.exe" (
|
|
echo ERROR: TeslaLauncherAgent.exe not found in %AGENT_SRC%
|
|
echo Run build.bat first, then run install.bat from the TeslaLauncher\ folder.
|
|
pause & exit /b 1
|
|
)
|
|
|
|
:: ── Detect and clean up existing installation ─────────────────────────────────
|
|
set EXISTING=0
|
|
if exist "%SERVICE_EXE%" set EXISTING=1
|
|
if exist "%AGENT_EXE%" set EXISTING=1
|
|
|
|
if "%EXISTING%"=="1" (
|
|
echo Existing installation detected. Cleaning up...
|
|
echo.
|
|
|
|
:: Stop and kill the Agent process
|
|
taskkill /F /IM TeslaLauncherAgent.exe >nul 2>&1
|
|
echo Agent process stopped.
|
|
|
|
:: Stop and remove the service, wait for it to fully stop
|
|
sc stop "%SERVICE_NAME%" >nul 2>&1
|
|
sc stop "Tesla Application Launcher" >nul 2>&1
|
|
timeout /t 3 /nobreak >nul
|
|
sc delete "%SERVICE_NAME%" >nul 2>&1
|
|
sc delete "Tesla Application Launcher" >nul 2>&1
|
|
timeout /t 2 /nobreak >nul
|
|
echo Service stopped and removed.
|
|
|
|
:: Delete old executables, logs, and session key so SecureConfig re-runs
|
|
del /F /Q "%SERVICE_EXE%" >nul 2>&1
|
|
del /F /Q "%AGENT_EXE%" >nul 2>&1
|
|
del /F /Q "%INSTALL_DIR%\podconf.log" >nul 2>&1
|
|
del /F /Q "%DATA_DIR%\TeslaKeyStore.key" >nul 2>&1
|
|
del /F /Q "%DATA_DIR%\LaunchApps.xml" >nul 2>&1
|
|
del /F /Q "%DATA_DIR%\configuring.json" >nul 2>&1
|
|
echo Old executables, logs, session key, and app config deleted.
|
|
|
|
:: Reset all physical Ethernet adapters to DHCP so the SecureConfig
|
|
:: protocol triggers correctly on the next boot.
|
|
:: We must REMOVE the static IP address entry first, then enable DHCP.
|
|
:: Set-NetIPInterface -Dhcp Enabled alone only flips the DHCP flag but
|
|
:: leaves the static address in the registry, so IsMachineConfigured()
|
|
:: still sees a non-DHCP adapter on the next boot and skips SecureConfig.
|
|
echo Resetting network adapters to DHCP...
|
|
powershell -NoProfile -Command "Get-NetAdapter -Physical | Where-Object {$_.Status -eq 'Up'} | ForEach-Object { $n=$_.Name; Get-NetIPAddress -InterfaceAlias $n -AddressFamily IPv4 -EA 0 | Where-Object {$_.PrefixOrigin -ne 'WellKnown' -and $_.PrefixOrigin -ne 'Dhcp'} | Remove-NetIPAddress -Confirm:$false -EA 0; Set-NetIPInterface -InterfaceAlias $n -Dhcp Enabled -EA 0 }; Get-NetAdapter -Physical | Where-Object {$_.Status -eq 'Up'} | Set-DnsClientServerAddress -ResetServerAddresses" >nul 2>&1
|
|
echo Network adapters reset to DHCP.
|
|
echo.
|
|
) else (
|
|
:: No existing install — still remove any stale service registration
|
|
sc stop "%SERVICE_NAME%" >nul 2>&1
|
|
sc stop "Tesla Application Launcher" >nul 2>&1
|
|
sc delete "%SERVICE_NAME%" >nul 2>&1
|
|
sc delete "Tesla Application Launcher" >nul 2>&1
|
|
timeout /t 2 /nobreak >nul
|
|
)
|
|
|
|
:: ── STEP 1: Create directories ────────────────────────────────────────────────
|
|
echo [1/8] Creating directories...
|
|
if not exist "%INSTALL_DIR%" mkdir "%INSTALL_DIR%"
|
|
if not exist "%DATA_DIR%" mkdir "%DATA_DIR%"
|
|
if not exist "C:\Games" mkdir "C:\Games"
|
|
|
|
:: Grant all users modify access to the data and games directories so
|
|
:: the Service and Agent can write files (LaunchApps.xml, game installs).
|
|
icacls "%DATA_DIR%" /grant *S-1-5-32-545:(OI)(CI)M /T >nul 2>&1
|
|
icacls "C:\Games" /grant *S-1-5-32-545:(OI)(CI)M /T >nul 2>&1
|
|
echo %INSTALL_DIR%
|
|
echo %DATA_DIR% (Users: modify access)
|
|
echo C:\Games (Users: modify access)
|
|
|
|
:: ── STEP 2: Copy files ────────────────────────────────────────────────────────
|
|
echo [2/8] Copying files...
|
|
:: net48 framework-dependent build: each folder holds the exe + its dependency
|
|
:: DLLs + .config. Copy both folders into the install dir (shared DLLs overwrite
|
|
:: identically; the two .exe.config files coexist).
|
|
copy /Y "%SERVICE_SRC%\*.*" "%INSTALL_DIR%\" >nul
|
|
copy /Y "%AGENT_SRC%\*.*" "%INSTALL_DIR%\" >nul
|
|
|
|
:: Install DirectX June 2010 runtime (required by games)
|
|
if exist "%ROOT%\dx9201006\DXSETUP.exe" (
|
|
echo Installing DirectX runtime...
|
|
"%ROOT%\dx9201006\DXSETUP.exe" /silent
|
|
echo DirectX installed.
|
|
)
|
|
|
|
:: Install OpenAL runtime (required by game audio)
|
|
if exist "%ROOT%oalinst.exe" (
|
|
echo Installing OpenAL runtime...
|
|
"%ROOT%oalinst.exe" /s
|
|
echo OpenAL installed.
|
|
)
|
|
|
|
:: Enable SMB1 client (required by game networking)
|
|
echo Enabling SMB1 file sharing...
|
|
dism /Online /Enable-Feature /FeatureName:SMB1Protocol /All /NoRestart >nul 2>&1
|
|
echo SMB1 enabled (reboot required to take effect).
|
|
|
|
:: Enable DirectPlay (required by older games)
|
|
echo Enabling DirectPlay...
|
|
dism /Online /Enable-Feature /FeatureName:DirectPlay /All /NoRestart >nul 2>&1
|
|
echo DirectPlay enabled.
|
|
echo Done.
|
|
|
|
:: ── STEP 3: Install Windows Service ──────────────────────────────────────────
|
|
echo [3/8] Installing Windows Service...
|
|
sc create "%SERVICE_NAME%" ^
|
|
binPath= "\"%SERVICE_EXE%\"" ^
|
|
DisplayName= "%SERVICE_DISPLAY%" ^
|
|
start= delayed-auto ^
|
|
obj= LocalSystem ^
|
|
type= own
|
|
|
|
if %errorlevel% neq 0 (
|
|
echo ERROR: Failed to register Windows Service.
|
|
pause & exit /b 1
|
|
)
|
|
|
|
sc description "%SERVICE_NAME%" ^
|
|
"Tesla Application Launcher - accepts TeslaConsole connections and controls simulation software"
|
|
sc failure "%SERVICE_NAME%" ^
|
|
reset= 86400 actions= restart/5000/restart/10000/restart/30000
|
|
|
|
:: Delay auto-start by 20 seconds to let the network stack settle
|
|
reg add "HKLM\SYSTEM\CurrentControlSet\Services\Tesla Application Launcher" ^
|
|
/v AutoStartDelay /t REG_DWORD /d 20000 /f >nul
|
|
|
|
:: Set the global delayed-auto-start delay to 20 seconds (default is 120s)
|
|
reg add "HKLM\SYSTEM\CurrentControlSet\Control" ^
|
|
/v AutoStartDelay /t REG_DWORD /d 20000 /f >nul
|
|
|
|
echo Service registered: "%SERVICE_NAME%" (20s per-service delay, 20s global delay)
|
|
|
|
:: ── STEP 4: Disable Windows Firewall (closed network) ────────────────────────
|
|
echo.
|
|
echo [4/8] Disabling Windows Firewall (closed network)...
|
|
:: Disable firewall on all profiles — pods run on a closed network
|
|
netsh advfirewall set allprofiles state off
|
|
echo Windows Firewall disabled on all profiles.
|
|
|
|
:: ── STEP 5: Power settings (max performance, no sleep) ──────────────────────
|
|
echo.
|
|
echo [5/8] Configuring power settings...
|
|
|
|
:: Activate Ultimate Performance plan (hidden by default, GUID is well-known)
|
|
powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61 >nul 2>&1
|
|
for /f "tokens=4" %%g in ('powercfg -list ^| findstr /i "Ultimate"') do (
|
|
powercfg -setactive %%g
|
|
)
|
|
echo Ultimate Performance power plan activated.
|
|
|
|
:: Disable all sleep/hibernate/standby timeouts (AC power)
|
|
powercfg -change -standby-timeout-ac 0
|
|
powercfg -change -hibernate-timeout-ac 0
|
|
powercfg -change -monitor-timeout-ac 0
|
|
powercfg -change -disk-timeout-ac 0
|
|
powercfg -h off >nul 2>&1
|
|
echo Sleep, hibernate, monitor timeout, and disk timeout disabled.
|
|
|
|
:: ── STEP 6: Disable notifications ───────────────────────────────────────────
|
|
echo.
|
|
echo [6/8] Disabling notifications...
|
|
|
|
:: Disable Action Center / notification center
|
|
reg add "HKCU\SOFTWARE\Policies\Microsoft\Windows\Explorer" ^
|
|
/v DisableNotificationCenter /t REG_DWORD /d 1 /f >nul
|
|
:: Disable toast notifications
|
|
reg add "HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\PushNotifications" ^
|
|
/v ToastEnabled /t REG_DWORD /d 0 /f >nul
|
|
:: Disable Windows tips and suggestions
|
|
reg add "HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" ^
|
|
/v SubscribedContent-338389Enabled /t REG_DWORD /d 0 /f >nul
|
|
reg add "HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" ^
|
|
/v SubscribedContent-310093Enabled /t REG_DWORD /d 0 /f >nul
|
|
:: Disable "Get tips, tricks, and suggestions"
|
|
reg add "HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\ContentDeliveryManager" ^
|
|
/v SoftLandingEnabled /t REG_DWORD /d 0 /f >nul
|
|
echo Notifications and tips disabled.
|
|
|
|
:: ── STEP 7: Disable UAC ─────────────────────────────────────────────────────
|
|
echo.
|
|
echo [7/8] Disabling UAC...
|
|
reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" ^
|
|
/v EnableLUA /t REG_DWORD /d 0 /f >nul
|
|
reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" ^
|
|
/v ConsentPromptBehaviorAdmin /t REG_DWORD /d 0 /f >nul
|
|
reg add "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System" ^
|
|
/v PromptOnSecureDesktop /t REG_DWORD /d 0 /f >nul
|
|
echo UAC disabled (takes effect after reboot).
|
|
|
|
:: ── STEP 8: Configure Agent auto-start ───────────────────────────────────────
|
|
echo.
|
|
echo [8/8] Configuring Agent auto-start...
|
|
|
|
set AUTORUN_KEY=HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
|
|
reg add "%AUTORUN_KEY%" /v "TeslaLauncherAgent" /t REG_SZ ^
|
|
/d "\"%AGENT_EXE%\"" /f >nul
|
|
|
|
echo Added TeslaLauncherAgent to HKLM\...\Run.
|
|
echo.
|
|
echo IMPORTANT: This cockpit PC must be configured for auto-login.
|
|
echo If not already set up, run netplwiz and uncheck
|
|
echo "Users must enter a user name and password", or set:
|
|
echo HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
|
|
echo AutoAdminLogon = 1
|
|
echo DefaultUserName = ^<cockpit user^>
|
|
echo DefaultPassword = ^<password^>
|
|
|
|
:: ── Done ──────────────────────────────────────────────────────────────────────
|
|
echo.
|
|
echo ============================================================
|
|
echo Installation Complete!
|
|
echo ============================================================
|
|
echo.
|
|
echo Installed to : %INSTALL_DIR%
|
|
echo Config dir : %DATA_DIR%
|
|
echo Firewall : disabled (closed network)
|
|
echo.
|
|
echo Rebooting in 10 seconds...
|
|
echo The Service and Agent will start automatically in the correct order.
|
|
echo On first boot with DHCP, SecureConfig runs automatically —
|
|
echo watch plasma or on main screen for the Request ID and Passphrase.
|
|
echo.
|
|
echo After reboot: use Console to install apps.
|
|
echo.
|
|
shutdown /r /t 10
|