- TargetFrameworks net48;net40. net48 keeps x64 + ViGEm + System.IO.Ports
package; net40 adds Microsoft.Bcl.Async + System.ValueTuple and uses the
in-box SerialPort.
- Compat/TaskCompat bridges Task.Run/Delay/WhenAny/WhenAll (TaskEx on
net40) and SemaphoreSlim.WaitAsync (net40 blocks briefly - trivial at
9600 baud).
- IReadOnlyList/IReadOnlyDictionary -> IList/IDictionary throughout
(net40 predates the IReadOnly* interfaces and the Bcl backport cannot
make arrays implement them).
- HashCode.Combine replaced with a manual combine (Bcl.HashCode has no
net40 build); Marshal.SizeOf<T> -> typeof form; ViGEmJoystickSink
gated #if !NET40. HidFeederJoystickSink stays on both flavors - it
will drive RioGamepadXP.sys on XP via the same contract.
Both TFMs build; 275 tests green on net48.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
RioRuntime raises AxesUpdated with the calibrated AxisOutputs after every
analog reply (independent of the joystick sink, so the gauges work while
editor input routing is suppressed). The editor strip now renders the
values live: Z and the L/R pedals (Rx/Ry) fill bottom-up, Rz deflects
from a center tick, and the X/Y box tracks the stick as a dot over a
crosshair. Fraction/deflection math is pure in Core.Editing.AxisGauges
(clamped, unit-tested); the canvas repaints only the strip and only on
change. Verified by offline form screenshots against injected values.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Profile editor:
- Cockpit-style encoder gauges centered over the Upper Middle MFD: Z left,
X/Y right, and L/R/Rz arranged as a big "U".
- [JoyStick] section surfaced as a vertical "Axis" toggle column (6 inverts
+ ZR mix), written back to the profile's calibration.
- Tighten the panel layout (close gaps, trim empty border columns); colour the
Secondary/Screen columns yellow; rename the "Joystick / Hat" board to
"Joystick"; add an "Import .ini..." tray entry.
- "RIO commands (live)" button group (all RioCommandCodes) fired at the live RIO.
Serial-port handling:
- Start dormant; only take the COM port for a profiled game (auto-switch) or
while editing, so the native games can open the port without clashing.
- Editor sessions hold the port but route keyboard/mouse/joystick to no-op
sinks (NullInputSink), so button function can be checked without injecting
input; RioRuntime.ButtonActivity drives a live cyan press indicator and
lamp feedback still applies.
- AutoSwitchWatcher.Reset() re-syncs the watcher after an editor session.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reworked the profile/mapping editor to mirror the original unfinished Win32
RIO driver's control-panel design (docs/Win32RIO, by FASA / Michel Lowrance)
instead of the flat config-sheet grid. The wallpaper region positions are a
VGA chroma-split display artifact, not the cockpit's logical shape.
- RioJoy.Core.Editing.CockpitPanel: the functional layout — five MFD clusters,
four board columns (Throttle/Secondary/Screen/Joystick-Hat), an encoder-gauge
strip, and the two later-added 4x4 keypads (Internal/External). Places every
address 0x00-0x47 / 0x50-0x6F exactly once (unit-tested).
- Tray PanelView/PanelCanvas render the panel; ProfileEditorForm drives it.
Buttons show label + assigned function (ButtonBinding.Describe -> CTL-N, JOY1,
POV-U, Mse LB, RIO command names; unit-tested). Lamp shade is driven by the
IsLit flag (not by whether a function is assigned); keypads are neutral blue
with no Lit checkbox. Added an Unassign button next to Apply.
- Removed the superseded sheet-grid UI (SheetView/SheetCanvas); SheetLayout +
config-sheet.csv stay as reference data.
docs/Win32RIO: the original driver (tasgame.sys, a 32-bit kernel HID minidriver
that opened the serial port, set baud/8N1/DTR, and spoke the *identical* RIO
protocol -- AnalogRequest/Reply, Button Pressed/Released, Check/Lamp/Reset/
Version -- validating our protocol port), oemsetup.inf, RemoteDriver.doc, and the
extracted control-panel / game-controllers mockups.
~236 xUnit tests green. PLAN.md updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Overlay generator (pure, tested) — RioJoy.Core/Overlay:
- FontFitter ports the legacy calc-fontsize auto-fit search (validated against a
brute-force oracle); OverlayLayoutEngine ports create-data-layer's fit + h/v
justification and adds per-region 90 deg CCW rotation; OverlayTemplate/Region +
OverlayTemplateStore hold cell geometry/colour/rotation (regions.json).
- GoobieDataImporter parses the legacy .data label sheet into label rows.
- src/RioJoy.Overlay: SkiaSharp rasterizer (SkiaTextMeasurer shared with the engine
so measured layout == drawn output; SkiaOverlayRenderer -> PNG;
ProfileWallpaperGenerator). Verified end-to-end on the real cockpit art
(regions.json + riojoy.png + TEST.data) by OverlayRenderIntegrationTests.
- RioJoy.Tray/WallpaperApplier applies via SystemParametersInfo; RioCoordinator
generates+applies on profile activation (opt-in via AppConfig.OverlayTemplatePath).
Region geometry — tools/XcfRegionExtract parses riojoy.xcf (a GIMP-format binary
reader, no GIMP needed) into the 119-cell regions.json: per-layer offsets/size/
font/colour, with 90 deg CCW rotation on a-00 + b-10..b-1F. Base image riojoy.png.
NOTE: the wallpaper positions are a VGA chroma-split display artifact (6 displays),
not the cockpit's logical layout.
Mapping editor (first cut) — RioJoy.Tray/Editor/ProfileEditorForm renders the
config sheet's logical grid (SheetLayout parses the sheet CSV export). The iRIO
word is edited via ButtonBinding <-> RioMapEntry.Create (no hex bit-twiddling), with
a context-sensitive picker: keyboard keys by name (KeyCatalog VK names), joystick
Button N, hat direction, mouse/RIO-command enum names; modifiers only for keyboard.
Opened from the tray ("Edit profile..."). The sheet-grid layout is a starting point
that needs rework from a better-formatted source.
~220 xUnit tests green. Docs (PLAN.md, README) updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
CydandClaude Fable 5