DOCS (the ask: after a compaction this session lost track of how the console
works and launched the wrong program, twice).
* NEW context/operator-console.md -- the dedicated topic that was missing.
Leads with the thing I got wrong: btoperator.py is the PySide6 GUI the
operator uses; btconsole.py is the headless relay it spawns. Then ports,
the route table, the roster/seat/identity model, the full round lifecycle
with every launch gate, liveness, mode-specific traps, and log locations.
* NEW docs/OPERATOR_GUIDE.md -- sysop-facing: start the console, set up a
mission, watch pods arrive, launch, run back-to-back rounds, what to press
when LAUNCH looks dead, a troubleshooting table keyed on the exact log
lines, and what to save BEFORE restarting a session (Start Session
truncates operator_relay.log, so restarting to clear a problem destroys the
evidence of it).
* CLAUDE.md: two Quick Lookup rows + a DO-NOT entry naming the two programs,
so the distinction survives the next compaction.
* context/multiplayer.md: a pointer out of the scattered console notes to the
new topic (they were buried across ~8 places in a large file, which is
exactly why they evaporated).
FIXES -- both are regressions in my own previous commit, found by the review
pass, and one would have made a games night WORSE:
* THE REAPER WOULD HAVE KILLED HEALTHY PLAYERS. It was gated only on "no
mission running", which a round RESET satisfies -- so it was armed for the
whole BETWEEN-ROUNDS wait, and that is a period when a pod is legitimately
byte-silent: its seat beacon is write-only for the process lifetime
(L4NET.CPP: "the relay ignores its silence") and its console pad has no egg
yet so it cannot ACK. A real night showed 12-minute and 5-minute gaps; the
180s deadline would have dropped healthy pods and forced their clients to
relaunch. It now runs ONLY in the active staging window, skips pads with no
egg and conns that have not HELLO'd, and last_seen is also stamped from
inbound UDP (a pod streaming updates while its TCP idles was being counted
as silent). Half-open detection is keepalive's job; this is just a backstop.
* UnboundLocalError in the operator UI. My end_sent reset was an `elif` in
the chain that assigns `head`, so that branch left `head` unbound -- a crash
on the first status refresh after End Mission, which is exactly the path the
relay's "StopMission sent" line produces. Moved out of the chain.
Plus one pre-existing wedge with the same symptom as the reported bug, live-
proven in operator_relay.log (~5 minutes of a night lost): _abort_round clears
eggs_released BEFORE the survivors' sockets close, so _maybe_reset_round's own
`if not self.eggs_released: return` skips the template restore forever -- the
roster stays trimmed, the release gates can never be met, and walk-ups get
ROSTER FULL. _rearm_for_new_round's restore is therefore now UNCONDITIONAL (it
was gated on eggs_released, which made Re-arm useless in the one state that most
needs it) and it clears round_hold_until so an abort's settle window is not
inherited. Aborts are ordinary: nothing on the wire distinguishes a straggler's
late FIN from a pod dying mid-load.
scratchpad/test_relay_rearm.py now 19 checks, all passing, including the two new
regression guards (a 15-minute-silent waiting pod is NOT reaped; a pad that was
never sent an egg is NOT reaped) and the mid-pair no-re-arm guard.
Still open, recorded in the new topic's frontmatter: the UDP endpoint map trusts
the sender's self-declared fromHost; the egg-ACK is a fixed-offset parse of one
recv with no reassembly; remote-operator mode can never enable LAUNCH.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
THE SYMPTOM: "after a game ends I push LAUNCH and nothing happens until I reset
the session entirely or reboot the console." The operator also observed the
mirror image, which is the tell: with a STABLE group, relaunching worked fine
several times in a row.
ROOT CAUSE. Two gates, both all-or-nothing, and a UI latch that agreed with
them:
* btconsole.py: the manual LAUNCH branch is guarded on `launches_sent == 0`,
but a finished mission leaves it at 2. The only paths back to 0 were
_check_launch_gate (needs EVERY seat of the last round to re-ACK) and
_maybe_reset_round (needs EVERY pod gone). A games night lives between
those -- most pods rejoin, one player closes their window. Worse, the
"not all seats filled" diagnostic sits INSIDE the `launches_sent == 0`
guard, so in exactly that state NOTHING was printed.
* btoperator.py: the LAUNCH button is gated on `not monitor.launched`, and
`launched` was cleared ONLY by the two relay lines those same gates emit
("WAITING FOR OPERATOR", "round RESET"). So the button was greyed out in
precisely the wedged state -- the click was a no-op by construction.
That is why a stable group worked (everyone re-ACKs -> gate fires) and why only
a session restart recovered (fresh relay process = fresh state).
FIXES
* An explicit operator LAUNCH is now sufficient authority to start a new
round: _rearm_for_new_round() clears the finished round's state and restores
the template roster/egg, KEEPING seats/beacons/connections, so whoever is
here stays here. Triggered on a press while a round is latched.
* New `rearm`/`newround` operator command + a Re-arm button, so recovery never
needs a session restart. Proven live over the control port.
* Every operator command is logged AT RECEIPT with the state that decides its
fate, so "did it arrive or was it ignored?" is answerable from the log.
* A stale End Mission can no longer kill the next mission: _tick_stop consumed
a stop_requested set between rounds by latching it until launches_sent hit 2,
then StopMissioning the new mission in the tick it launched -- also
indistinguishable from "launch did nothing". It is now consumed + announced
while idle. The UI's end_sent likewise reset per round, not per session
(End Mission used to work exactly once a night).
* The UI clears `launched` on "StopMission sent" and on the re-arm line, so the
button returns when the round actually ends, and only greys once a command
has really been written (a dead relay now says so instead of logging
">> sent" into the void -- _console_finished leaves console_proc non-None).
HARDENING (the "reboot the console" half)
* SO_KEEPALIVE on every accepted socket + a last_seen deadline and a reaper:
nothing detected a pod that vanished WITHOUT a FIN (sleeping laptop, dropped
Wi-Fi, killed process, NAT timeout). Such a conn kept acked=True forever,
which permanently blocked the round reset and held a phantom seat. The
reaper stands down while a mission is running.
* Every pod-facing send went blocking with NO timeout on the single-threaded
selector loop, so one wedged peer could freeze the entire relay. All sends
now go through _send_all_guarded (10s timeout, drops the peer on failure).
* _send_egg no longer calls getpeername() on a possibly-dead socket.
REGRESSION I INTRODUCED AND CAUGHT ON THE RIG: the first cut re-armed whenever
launches_sent >= 1, which also matched the NORMAL state between RunMission #1 and
#2 (launch_requested deliberately stays set across the pair). That reset the
pair mid-flight and re-released eggs every tick -- a re-arm storm that kicked
every pod into an identity-resync loop. The re-arm now additionally requires
`launch_at is None`, i.e. no launch sequence in flight. Verified: 0 REJOIN lines
and exactly 1 RE-ARM line across a full 3-mission rig session.
VERIFIED
* scratchpad/test_relay_rearm.py -- 6 groups, all passing: the exact wedge
state recovers; a stale stop is consumed while idle; staging is NOT restarted
under an impatient operator; mid-pair never re-arms; the happy path is
untouched and RunMission still reaches the pods; the reaper drops a silent
conn and keeps a live one, and stands down mid-mission.
* Live 2-pod rig (scratchpad/rig_relay.ps1 + relay_ctl.py over the control
port): two clean back-to-back missions, StopMission, round RESET, a live
`rearm`, and LAUNCH-with-nobody-present now printing why instead of nothing.
NOT reproduced end-to-end: the field wedge needs 3+ pods with staggered rejoins
(this rig's pods re-exec together, so the all-gone reset always fires). The
state itself is covered by the unit test. Awaiting live confirmation on a real
games night.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
REMOTE OPERATORS (dev-channel ask): the relay grows a control TCP
listener (console port + 7) speaking a line protocol -- AUTH <secret>
(auto-generated content\operator_secret.txt), then launch / stop /
ping / get mission / set key=value;... The relay's timestamped log
stream tees to the authenticated operator (bounded per-conn buffers --
a stalled operator can NEVER stall the relay; overflow = drop), with a
400-line history replay on connect so mid-session operators see
current state. One operator at a time; a new AUTH displaces the old.
stdin commands unchanged (rigs/GUI local mode untouched).
The operator GUI gains a 'Relay host' field: blank = today's local
flow byte-for-byte (child relay dies with the window); a hostname =
drive that machine's relay remotely (launch/stop/apply-settings over
the wire, roster rebuilt from the teed log, local-instance joins point
at the remote relay). Only the relay host needs port forwarding.
Scripted protocol test: auth reject/accept, takeover, get/set, ping,
history replay, and a FULL 2-node mission launched and stopped
entirely over the socket.
CRASH FIX (the layout-shifting heisenbug -- and almost certainly issue
#35): the new crash self-report finally captured its 24-frame stack:
InterestManager::OrphanInterestOrigin -> RemoveUninterestingEntity ->
DestroyEntityAudioObjects -> {Static,Dynamic}3DPatchSource::
IsAudioSourceClipped, AV reading NULL+0x38 -- the unguarded chain
GetMissionPlayer()->GetPlayerVehicle()->GetSimulationState() (the
authentic burning-mech death-silence check) hit a NULL vehicle during
MP teardown windows. Both sites now null-guard; burning semantics
preserved whenever the vehicle exists. Also live-confirms that
interest-based entity teardown RUNS in MP (the #38 paint mechanism).
Regression: full combat round + control-channel drive, zero crashes.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
CRASH SELF-REPORT (the #35/#41 heisenbug hunt): every unhandled
exception now logs its code, address, and an EBP-walked stack as
module-relative offsets (btl4+0xNNNN) into BT_LOG before dying --
any field crash on any machine hands us a resolvable stack. The
walker is per-dereference guarded (a corrupt chain truncates).
BT_CRASHTEST=1 exercises the path end-to-end (verified: forced AV
logs code/addr/5-frame stack). mkdist archives each build's PDB
next to its zip so offsets resolve per distributed version.
Context: a flaky release-only crash in the mech build path surfaced
during #38 rigs -- it moves with build layout, spares neither peer,
and masks under a debugger heap (13 clean cdb runs vs 2/3 crashes
without). A real latent memory bug; the self-report will catch it
wherever it strikes next.
ROUND-COMPLETED LATCH (issue #38, awaiting verification): relay-mode
clients refuse RunMission after a round has ended -- the lobby-loop
relaunch owns the next round (in-process round 2 rebuilt every
player/mech entity on stale globals; matchlog caught player=3:1->3:36
in one generation). Latch sets ONLY when the stop ends a RUNNING
mission (a stray pre-mission StopMission must not poison round 1 --
the first cut ate a legit launch, caught + fixed in rig). Regression
verification pending (contaminated by the heisenbug above).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Respawn-paint investigation: 10 forced respawns on the i22 rig showed
paint STABLE across in-place respawns on both master and replicant --
the in-place reset does NOT repaint. Two real findings landed:
1. 'Red' is NOT a camo color (the vehicle table authors Crimson=red for
camo; Red exists only as a PATCH color) -- an egg with color=Red
paints the mech silent gray from first spawn (the engine tolerates
the table miss by design). The relay now WARNS at egg load on any
color= outside the camo set; our MPSHORT test egg had exactly this
bug (fixed).
2. [paint] log now carries the entity id, so the one-time-observed
nondeterministic video-model rebuilds (sernos 2-5 with swapped
colors, run 1 only) will be attributable when they recur.
The reported color/style change on respawn remains unreproduced in the
deterministic rig -- needs the observer detail (whose mech, which view)
from the next field sighting.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Night-2 capture: one flapping pod cascaded 3 ROUND ABORTs in 8s; every
client relaunch-churned (~1 gen/s) until the D3D device-creation 20s
deadline fired on every machine ('could not connect direct 3d'), and
claim-less restarts minted duplicate roster seats.
Console (relay):
- Round abort clears stale console-conn ACK flags and HOLDS the next
egg release for an 8s settle window (_tick_settle re-releases when
quiet) -- the abort->instant-re-release->drop->abort cycle is broken.
- HELLO from a stale identity gets a REJOIN reply (identity resync via
the seat-request path, 5s/IP rate limit) instead of a bare drop.
- STATIC SEATS: seats remember (IP + callsign); a claim-less restart
from the same machine+name RECLAIMS its own seat (displacing its
zombie beacon) instead of minting a duplicate -- the pod contract:
same box, same seat, always.
- Operator local instances log with BT_LOG_APPEND (the night-2 crash
loop left a 2-line file; generations now leave a full trail).
Client:
- Relaunch storm damper: a generation that lived <15s sleeps 5s before
respawning (storm decays to a gentle cadence; normal multi-minute
round relaunches untouched; menu clicks explicitly never delayed).
Rig-verified: normal round + mid-MISSION drop = no abort (correct);
mid-LOAD kill = exactly ONE abort + 8s hold + seat reclaimed + no
cascade. The night-2 'host 7' identity-derivation subtlety remains
under forensics (append logs + first-breath line will capture it).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Tester ask: configure non-Xbox controllers. New L4JOY layer (DI8):
enumerates every non-XInput game device (up to 4), DIJOYSTATE2 polling
with range normalization, reacquire-on-loss, 3s hot-plug re-enum.
XInput devices are excluded via the documented RawInput IG_ VID/PID
check (live-verified skipping a real XBOX360 pad -- no double-feed).
bindings.txt grows joydev/joyaxis/joybutton/joyhat rows (device slots
by name substring or ordinal; axes X..RZ/SL0/SL1 with invert/slew/
deadzone; hats as 4-direction buttons with diagonal chords). PadRIO
runs them through the existing channel/event machinery -- per-binding
edge arrays release automatically on detach (the #24 rule), and a
direct throttle axis maps full lever travel onto the 0..1 channel
while the gait detent still snaps a lever parked in the walk/run dead
band.
BT_JOYCONFIG=1 (joyconfig.bat) runs a console capture wizard: move
each control when prompted (stick/twist/throttle/fire), invert derived
from the move direction, hat look cluster auto-added, output written
between markers in bindings.txt with the rest of the file preserved.
Legacy L4DINPUT DIJoystick (L4CONTROLS=DIJOYSTICK) untouched.
Verified: grammar accept/reject per line, XInput-exclusion live,
30s in-mission no-device polling clean. Awaiting a tester with real
stick hardware for axis verification.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Systematic actor-death x lifecycle-phase sweep (operator request after
the WaitingForEgg zombie). New handling, all live-verified:
1. PRE-EGG console-pad loss (the real zombie phase): before the egg the
pod's only link is the console pad -- the game socket doesn't exist,
so the earlier RelayGameDown hook could never fire (the verification
run itself caught this). Detection now lives in
HostDisconnectedMessageHandler ConsoleHostType (relayMode +
pre-scene -> BTRelayRejoinNow); mesh keeps 1995 behavior.
2. MID-MISSION relay loss: the STOP is relay-sent (1995: the console
owned the clock), so a pod losing its relay mid-match played a
peer-less FOREVER-mission. RelayGameDown (scene presented) now
posts StopMissionMessage at +15s -> normal end -> lobby relaunch.
3. POST-RELEASE pod death stalled the round (survivors wait forever on
the dead peer's connection gate): relay _abort_round -> route -11
REJOIN to survivors -> everyone re-seats in seconds (reset-first
ordering makes the drop cascade re-trigger-proof).
4. BTRelayRejoinNow carries BT_SEAT_CLAIM (mirrored tag): without it
the rejoiner's own reclaim-hold blocked assignment -> ROSTER FULL
loop for the 90s window (found by verification round 2).
5. Beacon NAT keepalive (SIO_KEEPALIVE_VALS 60s/10s) so long
between-rounds waits can't be silently unseated.
6. BT_LOG_APPEND=1 preserves the log across lobby-loop generations
(truncation erased round-1 verification evidence).
Verified non-issues: relay pods never bind the -net listener (no
double-launch collision on the internet path); mesh bind-fail exits
cleanly. Full matrix + evidence: context/multiplayer.md;
scratchpad/audit_verify.sh is the repeatable rig.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Field report (2026-07-23): with open seats the roster stays blue until
LAUNCH -- correct (loading cannot start before the roster is finalized,
and the LAUNCH press is what finalizes a partial roster) -- but the
operator lost all visibility into the post-launch staging, and worse,
the LAUNCH button's re-arm rode the "WAITING FOR OPERATOR" line that
only prints on a FULL-roster ACK, so in partial mode the button stayed
dead after round 1.
- The relay's 10s "launch HELD -- still loading: PLAYER n (k/m ready)"
lines now surface as the status banner ("STAGING -- PLAYER 2 still
loading (1/2 ready)") while the per-seat lights walk teal->green.
- "round RESET" re-arms the console (launched/ready/held cleared) so
every round's LAUNCH works regardless of roster fullness.
- The standby banner explains the mode: seated players are STANDING BY,
LAUNCH starts their loading, the mission fires itself at all-green.
- The seated count includes registered/ready players (it undercounted
once pods advanced past blue).
Monitor states unit-tested (held -> launch -> clear -> reset -> re-arm).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The between-rounds arcade flow (first-playtest-night field request): at
mission end every pod exited, seats dropped, and every round required
everyone to re-run join.bat with no way to adjust the mission.
1. AUTO-REJOIN: StopMission (operator END / mission clock -- NOT a
window close) sets gBTMissionStoppedByConsole; after the matchlog
upload btl4main relaunches the pod into the join wait with the same
cmdline (BT_CALLSIGN/BT_MECH ride the inherited environment).
2. SEAT RECLAIM: the assigned tag is mirrored file-scope
(BTRelaySelfTag) and re-presented as the 3rd SEAT_REQUEST payload
field (BT_SEAT_CLAIM); the relay holds a dropped seat for its tag
for 90s and a returning player gets their EXACT seat back -- static
ordering across rounds, the real-pod model. Non-claim joiners skip
reclaim-held seats.
3. LIVE MISSION EDITS: the console gains "Apply mission settings"
(enabled while a session runs) writing arena/time/weather/length
into the session egg; the relay re-reads the file at round reset and
egg release (roster shape locked mid-session).
Verified 2-pod 3-round: pods self-relaunched after each clock end; the
SECOND-to-rejoin still reclaimed its original seat (ordering held); the
between-rounds edit landed ("mission length now 75s"). Known edge
noted in the KB: a stale ready flag from a not-yet-exited old conn can
satisfy the launch gate mid-rejoin -- operators launch on green dots.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Live finding (round 3): firing RunMission while a pod is still loading
drowns that pod's load in the running mission's update streams -- the
same event queue serves both, so the load starves (the operator, always
last to join via the mech menu, loaded 5+ minutes or crashed while
testers took ~20s; solo loads on the same box take ~60s). The launch
timer now also waits for every registered pod's READY (route -10) so
everyone enters together, 1995-style; a held launch announces who's
still loading every 10s, and a 180s cap force-fires so a wedged pod
can't hold the night hostage.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The game self-pins to core 0 by default; on the operator box core 0 is
shared with the console/relay/desktop, and the mission load drains
frame-paced -- a starved frame rate multiplied the operator's load time
to 3-5 min while internet testers loaded in ~20s (live finding, round
2). The local-instance launcher now spreads the game across the upper
cores unless BT_AFFINITY is explicitly set.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
When every pod disconnects at once (normal end of a multiplayer round),
a failed send inside the PEER_DOWN fanout recursively drops that peer
and mutates by_host mid-iteration -> RuntimeError -> THE RELAY DIES,
taking the round reset and the matchlog uploads with it (live crash,
first 3-player internet round). Iterate over snapshots.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
'SEAT 2 READY' for the first (only) player read as an off-by-one (field
report) -- host 1 is the CONSOLE in the authentic 1995 numbering, so
pods start at host 2. Human-facing lines now read PLAYER 1/2/... with
the host id in parentheses for cross-reference against the game[host=N]
wire lines; GUI monitor regexes updated (tag-keyed as before, verified
seated/ready/left in isolation).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Every relay/console print now carries a wall-clock prefix (_StampedOut
stdout wrapper; the GUI monitor regexes use search() so the prefix is
transparent), and the pod's READY/pend lines carry wall time + tick --
post-mortems measure delays instead of guessing (the 3m40s load
reconstruction needed heartbeat-counting archaeology).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
silently replaced the WAITING-FOR-OPERATOR matcher (class-body last
assignment wins), breaking the LAUNCH button re-arm for back-to-back
missions. Renamed the old matcher RE_RELAY_WAITOP; both paths
regression-checked in isolation.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The roster showed "registered" for a still-loading pod and a ready one
alike -- with multi-minute contended loads the operator couldn't tell
who they'd be waiting on. When the app ladder reaches WaitingForLaunch
the pod sends one empty route -10 frame on its live relay game socket
(BTRelayNotifyReady; socket mirrored at HELLO); the relay announces
SEAT n READY (k/m loaded) and the console GUI lights the seat
bright-green with a "N pod(s) LOADED+READY" banner.
Verified LIVE by the operator: blue (seated) -> teal (registered) ->
green (ready) in order, twice. Also resolved the load-speed mystery:
loads are ~30s uncontended; the 1-2+ minute cases were assistant
background test runs competing with the user's interactive sessions on
the same machine (memory note added -- no game-spawning tests while the
user is testing).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
1. ROUND RESET (the "picked Hellbringer, got a Blackhawk" field bug):
trim/prefs finalize the session egg for ONE round, and that was
permanent for the relay's lifetime -- a rejoin after a mission or
crash got the stale finalized egg and its new callsign/mech request
was recorded but never applied. _maybe_reset_round() (both drop
paths) restores the original egg/roster/launch state once every pod
is gone; live beacons re-key by tag position (conn.seat_tag).
Verified two-round e2e: blkhawk mission -> exit -> RESET -> lok1
request -> egg rewritten -> the Hellbringer spawned.
2. DEVICE-CREATION RETRY: CreateDevice(HARDWARE_VERTEXPROCESSING) fails
transiently when a just-exited instance still holds the adapter
(caught live; also the parked "exit 139" join crash). The old
double-failure path called PostQuitMessage(1) -- which does NOT stop
execution -- and the NULL mDevice deref right after was the real
crash. Now: HW->SW retry with 500ms backoff and a 20s deadline,
then a clean error box + ExitProcess.
3. LOAD-TIME PUMP: mission load is thousands of back-to-back
synchronous model loads; the starved message pump ghosted the window
"Not Responding" mid-load. BTLoadPump() (hooked from
d3d_OBJECT::LoadObject) pumps + repaints the wait screen at most
every 150ms pre-run; no-op once the scene is live.
Also: round-reset originals captured after the roster parse (the first
cut crashed the relay constructor -- caught by the two-round test).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Rows are capacity + per-seat defaults now -- joiners auto-populate them
live and launch trims to whoever is seated, so hand-managing rows is
busywork. A Seats spinner (1-8) maintains the row count in relay mode;
Add pilot / Remove selected remain for mesh mode, where explicit
addresses matter.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
join out -- ROSTER FULL on every seat request, field report). Local
instances seat-request like every joiner now; trim-on-launch makes
exact seat ownership moot.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The operator no longer has to match the roster row count to the exact
player count (or watch the "empty seats will STALL" warning). Two
mechanisms:
1. PRESENCE BEACONS: the pod keeps its seat-request TCP connection open
for the process lifetime; the relay reads a live beacon as "seated"
and a pre-claim FIN frees the seat (no ghost seats -- a ghost stalls
every pod at the connection gate). Reservation expiry spares
beaconed seats.
2. TRIM-ON-LAUNCH (manual/GUI mode): operator LAUNCH before the roster
fills shrinks the session to the seats present -- egg [pilots]/pages
trimmed, seat ids REMAPPED by position (pods re-derive their host id
from their tag's roster position, so walk-up prefs and beacons re-key
consistently), roster/expected_ids shrink, eggs release, the launch
pair fires as ACKs land.
GUI: roster rows now update LIVE from the walk-up requests (SEAT n
PRESENT/FREED lines -> callsign/mech cells + a blue "seated" status
light), and LAUNCH MISSION enables from the first seated player with a
"starts with whoever is here" banner.
Verified 2-node: 2-of-4 trim ran the mission with the requested mechs;
and the mid-roster GAP case -- three joined, the middle player quit
pre-launch (beacon FIN freed the seat), trim remapped seat 4->3 with the
survivor's callsign/mech following, both survivors registered under the
remapped ids and ran the mission. Also: stdin reader guarded against
sys.stdin=None spawn shapes (the GUI QProcess pipe is the supported
operator channel).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The Launch-local-instances path pinned BT_SELF, which claims a seat
directly and SKIPS the seat request -- the join menu (and the callsign/
mech choice it carries) never ran, so a local test instance couldn't
exercise the walk-up flow. Relay-mode local instances now launch
zero-arg with BT_FE_JOIN=1: the JOIN-GAME menu opens, the relay assigns
the seat, and the choice lands in the egg like any join.bat player.
Each instance gets a distinct relaunch port via BT_FE_JOINPORT
(btl4main JoinRelay case; default 1501) -- two -net listeners can't
share a port on one box. Mesh-mode locals keep the direct path.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The 1995 front-desk conversation, over the internet. join.bat/
join_lan.bat now open a JOIN-GAME menu (the FE in BT_FE_JOIN trim:
CALLSIGN edit + the 18-mech list + JOIN); the choice relaunches into the
normal join with BT_CALLSIGN/BT_MECH env, rides the relay SEAT_REQUEST
as {callsign NUL mech NUL} (empty payload = roster defaults, wire-
compatible), and the relay validates the mech tag, HOLDS egg delivery
until every pod's console pad is connected, rewrites the egg via
eggmodel (vehicle= + rasterized callsign bitmaps, graceful no-PySide6
fallback) and streams it to all pads -- so every player's egg copy
carries every player's callsign.
The hold is gated on CONSOLE-PAD count, not game-side registration: a
pod HELLOs only after parsing the egg's roster, so a registration gate
deadlocks (hit live in the first run; pods animate in WAITING FOR
MISSION ASSIGNMENT during the hold).
Verified 2-node e2e (env-injected requests): thor/vulture requested over
roster defaults bhk1/ava1 -> relay held 1/2, released at 2/2, rewrote
both seats (relay log), the delivered egg carries vehicle=thor/vulture +
name=VIPER/MONGOOSE, both pods launched and built [cyl] tables for both
requested mechs. Join-menu layout screenshot-verified; the menu's
click-through relaunch awaits live human verification.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Distributed test zips go stale and stray. BT_EXPIRE (CMake option,
DEFAULT ON so a zip can never accidentally ship without it) makes the
exe refuse to start BT_EXPIRE_DAYS (default 14) after its build day:
boot logs the remaining window, an expired build logs + shows a
"test build expired -- ask the operator for the current build" box and
exits. btversion.h now stamps BT_BUILD_UNIX (UTC-midnight-rounded so
the only-on-change header churns once per day, not every build) +
BT_BUILD_DATE. Dev is unaffected: every build re-stamps the day.
-DBT_EXPIRE=OFF builds a non-expiring exe; mkdist reads the cache and
marks such a zip "-noexpire" + prints a warning, and the tester README
expiry note is {EXPIRE}-marker-gated like the steam lines. Second
compile-gate exception after BT_STEAM (convention updated in
glass-cockpit.md). Quality gate, not DRM -- a clock rollback defeats it.
Verified live: default build logs "test build window: 14 day(s) left";
a -DBT_EXPIRE_DAYS=0 build logs TEST BUILD EXPIRED and parks on the
explanation box (window title checked) without starting the game;
restored to 14 and rebuilt clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
For the 8-player playtest. Damage authority is VICTIM-side, so no single
peer sees the whole match: every -net instance now writes a compact
machine-parseable matchlog_<date>_<time>_<pid>.txt (auto-armed by -net;
BT_MATCHLOG=1/0 overrides; solo silent), and at mission end a relay-mode
pod dials the relay game port (the seat-request throwaway-dial pattern,
envelope route -9) and streams the file back -- the relay saves every
peer's copy under matchlogs/ on the operator's machine, so testers send
nothing by hand. tools/matchcheck.py <dir> reconciles all of them:
damage claimed (FIRE/PROJ/SPLASH/RAM, shooter-side) vs applied (DMG,
victim-side authoritative), kill/death replication across observers,
PLAYER_DEAD counts, scores, version skew, replicant-application and
unattributed-damage anomalies, mid-mission disconnects.
Hooks at the authoritative sites: Mech::TakeDamageMessageHandler (DMG,
post-base, zone + post-application damageLevel), MechWeapon::
SendDamageMessage (FIRE), projectile impact/splash/collision dispatch
(PROJ/SPLASH/RAM), wreck entry (DEATH -- a ONE-SHOT latch at
MovementMode 9, NOT the transition: a replicant arrives at 9 straight
from the type-6 record header and never runs the transition branch),
BTPlayer vehicle/death/score handlers (VEHICLE/PLAYER_DEAD/SCORE), zone
crit cascade (CRIT), APP.cpp RunningMission (MISSION), L4NET host
handlers (PEER_UP/PEER_DOWN). Every line t=/w=/st=-stamped + fflushed.
Verified 2-node: mesh run pairs A's 22 FIRE 1:1 with B's 22 DMG (same
amounts, cylinder-resolved zones, ~200ms latency); force-damage kill run
logs 103 DMG + 3 DEATH inst=M + 3 PLAYER_DEAD across three respawn
cycles victim-side and the kill SCOREs shooter-side; relay-mode run
auto-uploaded BOTH peers' files at the mission-clock stop and matchcheck
produced the full report with exactly one (correct) anomaly -- the force
hook's claim-less damage, the unattributed-damage detector working.
Relay gained a route-specific 8MB cap for the upload frame (game frames
stay capped at 1600).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The console's one-click local-instance launcher predates the unified build
and never set the platform env -- instances booted the DEV profile (no
PadRIO), so the legacy arrow-drive bridge owned the keyboard instead of the
bindings.txt keymap (arrows drove fwd/back/turn, Alt-reverse dead). The
join bats already set it; now the operator's QProcess env does too.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The user hit the full session menu from play_solo -- HOST/JOIN LAN modes,
NET PORT and the Steam buttons don't belong in the solo flow (LAN goes
through the join bats + operator; Steam through play_steam.bat).
BT_FE_SOLO=1 (set by play_solo.bat + the btoperator generated bat):
- the MODE cycle keeps only the two solo entries (kModes lists them first:
SOLO MISSION, RAW SOLO) via the GroupSize clamp
- NET PORT row and the HOST/JOIN STEAM buttons are not laid out
- a stale fe_last.ini mode of hostlan/joinlan is rejected by the existing
LoadPersisted GroupSize clamp, so the selection can never land on a
hidden mode
play_steam.bat keeps the full menu.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
play_solo hardcoded -egg ARENA1.EGG, bypassing the miniconsole front end
that already carries the full pickers: SOLO/RAW-SOLO/HOST-LAN/JOIN-LAN
modes, 8 maps, all 18 mechs, 4 experience levels, colours/badges/patches,
drop zones, advanced damage, time-of-day, weather and mission length.
The bat now launches zero-arg (BT_PLATFORM=glass -> the menu); the menu
relaunches the exe with the generated egg and the cockpit/gauge env
(BT_START_INSIDE/BT_DEV_GAUGES) inherits into the mission child. Menu-boot
verified with the bat's exact env; the solo menu->mission->menu cycle was
verified at FE landing. README + the btoperator generated-bat template
updated to match.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The unification flattened BT_STEAM into the always-on exe; the user flagged
the constraint that makes it the one legitimate compile gate: the Steamworks
SDK license bars a public release with Steam inside, so a release build must
exclude it entirely.
- CMakeLists: option(BT_STEAM OFF) restored around the Steamworks block --
an OFF configure touches no SDK headers, no steam_api.lib, no DLL copy.
BT_GLASS stays retired (always defined); ONE build dir either way.
Dev checkout: build/ configured once with -DBT_STEAM=ON.
- mkdist: reads BT_STEAM from build/CMakeCache.txt. Steam-OFF zips exclude
play_steam.bat + steam_api.dll (explicitly filtering a STALE DLL left by
an earlier ON build), strip the README steam section ({STEAM} line
markers), and take a -nosteam name suffix so the flavors never clobber
(found live: both stamped 4.11.436 and the release zip overwrote the dev
zip).
Verified both flavors:
ON (dev build): steam smoke degrades to Winsock without the client;
zip carries play_steam.bat + steam_api.dll + README steam lines.
OFF (scratch build-relcheck, deleted after): 0 compile errors; exe dir =
btl4.exe + OpenAL32.dll only; boots + simulates; BT_STEAM_NET=1 inert
(transport not in the binary); end-to-end zip has zero steam bits and
a clean README.
KB: context/glass-cockpit.md unified-build section records the license gate.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The first zips (pre-mkdist) shipped d3dx9_43.dll / msvcp140.dll /
vcruntime140.dll next to the exe -- testers without the VC++ / DirectX
redistributables cannot load the exe otherwise. mkdist missed them (the
clean-extract boot test passed only because this machine has them system-
wide). Carried into redist/ (recovered from BT411_4.11.341.zip) and
packaged next to the exe.
Also: players/README.txt -- the tester instructions (updated for the
unified build: one exe, clickable cockpit surround, trigger-config regroup,
the settled keymap, play_steam.bat) -- stamped with the version and placed
at the zip root, matching the original zips' shape.
Clean-extract verified on BT411_4.11.435.zip: root has README + 4 bats,
exe dir carries all 4 DLLs, glass-profile boot simulates.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The three build dirs (build\ pod, build-glass\, build-steam\) were compile-
time splits of the same game; the tax was real: a stale steam exe shipped 2
days behind, the felt keymap flipped with the boot flavor, and cockpit
clicks were silently dead in the pod build (the trigger-config incident).
Now everything compiles into the single build\ exe:
- CMakeLists: BT_GLASS/BT_STEAM options removed; the glass TUs (PadRIO,
bindings, panel, glass windows, plasma) + FE/console + Steam transport
compile unconditionally; both macros always defined (seam markers).
- Steam: steam_api.lib linked with /DELAYLOAD:steam_api.dll + delayimp --
the DLL maps only when SteamAPI is first called, and every call site
gates on BT_STEAM_NET=1 (BTSteamNet_* short-circuit on steamActive), so
machines without the DLL run everything but Steam sessions.
- CABINET GUARD (btl4main): the miniconsole menu previously claimed any
zero-arg launch -- unified, that would hijack the pod cabinet's boot
shape. The menu now requires BT_PLATFORM=glass (or BT_FE_MENU=1);
platform parse moved above the fe_menu_mode computation. A bare boot
behaves exactly like the old pod build (DEV profile, wait for egg).
- Bats (play_solo/join/join_lan/play_steam) + the btoperator.py template:
single build\ path + BT_PLATFORM=glass. mkdist: one exe (+DLL scan
picks up OpenAL32 + steam_api). build-glass\/build-steam\/build-glass2\
(a stale Jul-20 cache) deleted.
Verified matrix on the unified exe:
bare zero-arg boot == old pod exe (same DEV profile + egg-load path;
the segfault on a missing egg is pre-existing, baselined vs the zip exe)
glass + BT_BTNTEST scripted click -> [cfgmap] ENTER/EXIT (trigger config)
runs with steam_api.dll ABSENT (delay-load proven)
glass zero-arg -> miniconsole menu
2-node loopback MP: 145 ticks each, cross-connected
BT_STEAM_NET=1 without Steam client -> "staying on Winsock", game runs
KB: context/glass-cockpit.md compile-gates section rewritten for the
unified model.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Rebuilt build-steam fresh (was stale at Jul 20 -- predated today's gauge/
trigger-config/keymap fixes); the DLL scan picks up steam_api.dll
automatically. Clean-extract verified: the steam exe boots to the front-end
menu (Steam client only needed for live lobbies).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Packages the player bats (zip root), BOTH exes (build\ pod fallback +
build-glass\ preferred -- the bats auto-select glass = clickable cockpit /
trigger config / bindings.txt keymap), the runtime DLLs next to each exe
(OpenAL32.dll -- the first clean-extract boot test failed without it), and
the git-TRACKED content/ files only (the working tree carries dev junk that
must not ship). Output: dist/BT411-<date>-<hash>.zip (dist/ gitignored).
Verified: clean-extract boot test -- glass exe boots the GLASS profile and
simulates; pod exe boots as fallback.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
join.bat + join_lan.bat + the btoperator.py generator template now prefer
build-glass\Release\btl4.exe when present and set BT_PLATFORM=glass with it
-- so MP sessions on a dev checkout get PadRIO (mouse-clickable cockpit
buttons: trigger config, MFD banks, radar rails) and the bindings.txt keymap,
identical to solo play. Player zips (which ship only build\) fall back to
the pod build exactly as before.
Verified: 2-node loopback MP smoke on the GLASS build (the documented
procedure: A -egg MP.EGG -net 1501 + B -net 1601 + tools/btconsole.py) --
both nodes cross-connected (GameMachineHost 1502/1602), ~150 sim ticks
each, no errors. btoperator.py syntax-checked; regenerated bats carry the
same guard.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Field report: LAN auto-discovery (BT_RELAY=auto) didn't work -- a joiner had to
hand-set BT_RELAY=10.0.0.46:1500 to reach the console every time.
- players/join_lan.bat: BT_RELAY=auto -> BT_RELAY=10.0.0.46:1500 (the operator PC's
LAN IP), with a comment on updating it if the IP changes.
- tools/btoperator.py: the export now DETECTS the operator PC's LAN IP (UDP
default-route probe, no packet sent) and stamps BT_RELAY=<lan-ip>:port into the
generated join_lan.bat instead of "auto" -- so regeneration keeps it correct and
doesn't revert to the broken auto-discovery. Verified: detects 10.0.0.46 here.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- manifest410.py: monotone-DP TU labeling (data-cluster affinity + CLASSMAP
seeds + recon @addr soft votes) replaces naive fill; BT region = 917 fn /
~230 KB, extents match every independently-known TU boundary.
- source-completeness: ROUTE A CLOSED (Nick holds no further assets);
toolchain = BC++ 4.52 PROVEN by CW32.LIB byte-match, archived at
TeslaRel410/BORLAND; OPT.MAK = the shipped binary's exact recipe; extender
corrected to Borland PowerPack DPMI32 (was "Phar Lap TNT"); "all BT headers
survive" corrected (17/36 bt-side; mech.hpp etc. reconstruction-only);
engine gaps enumerated (vdata.hpp first, back-dated from BT412).
- phases/phase-03: rounds 1-3 of the source410 campaign - 6/10 surviving
originals compile clean under BC4.52; console wire IDs recovered from the
binary ctors (Killed=9 Damaged=10 ScoreUpdate=13 DWH=15 [T1], TeamScore
guessed 12 [T4] - answers the TeslaSuite console-port spec's open item);
round-3 finding: MECH.HPP is the capstone grown with the mech TU
reconstructions, BTREG.CPP green = the header-family milestone.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The egg's per-pilot 'experience' (novice/standard/veteran/expert) is the
pod's simulation-fidelity tier -- stored at BTMission+0xe4 and seeded into
the BTPlayer ctor's flag block @4c0bc8 [T1]. The old 'per-role display
toggles / returnFromDeath' reading was WRONG: the source is
mission->experienceLevel, and the neighboring pair copies
mission->advancedDamageOn (the egg's technician splash/collision switch),
not role floats. Known consumers: 0x260 = the HEAT-MODEL master switch
(FUN_004ad7d4), 0x25c = the novice sim-lockout (jams/searchlight/powersub),
0x274 = the raw level (FUN_004ac9c8 ==0 novice predicate).
NEW established topic context/experience-levels.md (data path, binary flag
rows per level, manual cross-refs, corrections log) + router row; sweeps in
decomp-reference/gauges-hud/open-questions/pod-hardware/subsystems.
btplayer.cpp/.hpp re-annotated with the corrected semantics; the guarded
role-based seeding stays as a marked [T3] stand-in (slot drift vs the
binary switch documented inline) until the wiring task points it at
BTMission::ExperienceLevel().
(Research by the parallel context session; committed from the glass line.)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Solo practice already started in-cockpit (BT_START_INSIDE) but didn't
open the MFD gauges window -- inconsistent with the join bats. Add
BT_DEV_GAUGES=1 so single-player practice mirrors the pod experience.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Field report: a remote player had smooth gameplay but in 3RD-PERSON with
NO gauges. Cause: view mode + gauges are CLIENT launch flags, not
something the relay/console can enforce -- and join.bat set neither, so
remote players booted in the game's desktop default (external camera, no
MFDs). The operator's own local launch sets both (the app's 'Start in
cockpit' + 'Dev gauges' checkboxes, on by default), which is why the
operator saw the correct view but remote players didn't.
The pod is a first-person cockpit with MFD gauges and no '3rd person' at
all, so cockpit is the right default for players. join.bat/join_lan.bat
now set BT_START_INSIDE=1 + BT_DEV_GAUGES=1. (Players can still press V
to toggle the external camera.)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Field report: after a mission timed out normally, relaunching a mission
did nothing. The relay was single-mission -- once it fired a launch
(launches_sent==2) it never re-armed.
Fix (operator-side only; the BINARY needs nothing -- a rejoined pod is a
brand-new process at WaitingForLaunch):
- btconsole _check_launch_gate: when a previous mission finished
(launches_sent==2) and ALL seats have RE-ACKED (every pod exited,
re-ran join.bat, reconnected), reset the launch state and re-print
'WAITING FOR OPERATOR LAUNCH'. Only reachable on a pod ACK (never
mid-mission). Launch is CONSUMED after RunMission #2 (launch_at=None,
launch_requested=False) so the next press is a deliberate new round.
- btoperator SessionMonitor: reset on each new
'WAITING FOR OPERATOR' so the LAUNCH button RE-ENABLES for mission 2
(it stayed disabled forever before -- the other half of the bug).
Verified e2e: two full missions on ONE relay session -- mission 1 runs +
times out on the clock, pods rejoin, relay re-arms + re-announces ready,
operator LAUNCH -> mission 2's RunMission #1/#2 fire (total fires 2) ->
pods running. BACK-TO-BACK PASS. Friends' zip unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Field report: a remote player ran join.bat from the wrong place (inside
the zip, or the .bat separated from content\/build\) and got 'The system
cannot find the path specified' + dumps -- the relative 'cd %~dp0content'
failed cryptically.
Now each bat: cd to its own dir, verify build\Release\btl4.exe +
content\<egg> exist, else jump to :badpath and print a clear message
('this file must sit in the extracted folder next to content and build;
right-click the zip - Extract All and run it from there'). Verified: run
from a dir with no content/build -> the guidance prints, no dump.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two additions after the live-session troubleshooting:
1. LAUNCH-SHORT is now VISIBLE (btconsole). Pressing LAUNCH with an
empty roster seat previously did NOTHING (eggs_done_at only sets when
ALL seats ACK, so the manual-launch arming silently no-op'd -- the
'I pressed launch and nothing happened' confusion). Now the relay
logs 'LAUNCH pressed but NOT all seats are filled' + a per-seat
readiness line + a WARNING naming the empty seat(s) and the fix
(reduce the roster). When all seats DO fill it auto-arms (launch
request persists). Verified: 2/3 filled -> clear warning naming
seat3.
2. Friend logs are now retrievable (btoperator exporter). join.bat /
join_lan.bat set BT_LOG=join.log and their exit message tells the
player to send content\join.log to the operator if the game closed
unexpectedly -- closes the friend-side-crash blind spot (their log
was the generic btl4.log, un-named, easy to miss).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every field bug this session needed the relay's OWN view to diagnose,
but the app only shows it in the (post-mortem-unreadable) GUI log pane.
Now _console_output also appends to content/operator_relay.log (fresh
per session; stderr is merged so relay tracebacks are captured too).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
FIELD BUG (2026-07-18): operator's local instance crashed + the mission
never launched. Root cause (confirmed by code inspection + stub test,
NOT the earlier mis-read of stale logs): the relay assigns a no-BT_SELF
joiner 'the lowest free seat'. The operator's local instance uses an
EXPLICIT seat (BT_SELF) but takes ~15s to boot; a remote join.bat
requests a seat immediately and gets assigned the operator's seat 1
first. The operator's later HELLO for seat 1 -> 'already registered'
-> dropped ('closed by relay') -> its seat sits empty -> the
All-connections-completed gate never fires -> game never starts.
Fix: the operator's LOCAL seats are RESERVED. btoperator passes the
Local roster tags as ; the
relay excludes those host_ids from seat ASSIGNMENT (an explicit HELLO
still claims them). Verified by stub test: a racing joiner is assigned
host 3 (seat 1 skipped), the operator's HELLO for the reserved seat 1
registers fine.
Also fixed the UX bug that produced the EARLIER 4-window mess: Local
now defaults checked only on the operator's own seat (row 0), not every
relay roster row.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
User: 'isn't the game supposed to time out tho?' Yes -- and it was
HALF-implemented: the egg's [mission] length drives the pods' countdown
and the final-30s ranking window, and the full StopMission -> fade ->
end chain exists, but nothing ever fired it: in 1995 the CONSOLE sent
StopMission at expiry. Our console never did, so missions ran forever.
- btconsole relay: arms the clock when RunMission #2 fires; sends
Application::StopMissionMessage (clientID 4, msgID 6 per APP.h:383,
exitCode NullExitCodeID) at length + 2s grace; stdin 'stop' command
ends the mission early (works in auto and manual modes).
- btoperator: END MISSION button (enabled once launched; resets per
session).
Verified live: 40s test mission -- relay logged the armed clock, sent
StopMission on time, the pod ran the authentic end chain and exited
cleanly ('[boot] RunMissions returned'). Standard eggs carry
length=600, so real sessions are now authentic 10-minute pod missions
with the score display in the last 30 seconds.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A zip recipient can dork around offline -- no -net argument means the
game self-launches a solo mission (all maps ship in content/). Solo
gets its own exit message (btl4.log pointer, no server language).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Field report (first internet-join attempt): both join bats 'hard
crash' on the remote machine. Root cause was procedural -- the host
session was not running -- but the failure PRESENTATION was the bug:
Release Fail() is a bare abort(), so a dead relay = silent process
death + instantly-closing console window.
- L4NET: the two player-facing dead-ends (LAN discovery no-answer,
seat request unreachable/full) now show a MessageBox saying what
happened and what to do before exiting (verified live against a
dead relay: 'BattleTech -- can't join the game' appears).
- join bats: echo + pause after exit so the window stays readable;
join_lan.bat header now says it is LAN-only (the remote user ran
both -- join_lan can never work over the internet).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
'Launch local instances' did nothing visible when no roster row had
Local checked (log pane quietly said 'launched 0') or when the session
was not started yet (instances would dial a dead relay and fail after
the bounded retry). Both now pop a clear dialog saying what to do.
Found live: user pressed the button with both Local boxes unchecked
and no session running -- 'nothing happened'.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
