The recovered system: fire channels = LBE4ControlsManager buttonGroups
(0x40/0x45/0x46/0x47); default groups = the per-mech type-6 controls-map
resource in BTL4.RES, installed by the T0 CreateStreamedMappings the port
already called -- it needed only the TriggerState attribute (id 0x13 PINNED
to the binary value; fireImpulse@0x31C is the binary's TriggerState) and an
input feed. Keyboard/harness now push press/release edges into the button
groups; the gBT*Trigger bypasses, per-type keyboard split and 1,0 pulse
hack are retired -- weapons sharing a button fire TOGETHER (madcat Trigger
= 4 weapons). Myomers @4b9550/@4b95b8 misattribution corrected (they are
MechWeapon ConfigureMappables/ChooseButton). Verified 2-node: kill through
the authentic chain (12 hits vs ~36 pre-groups). Config-mode session
(regrouping UI) = the remaining stage, KB-scoped.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Binary ctor @0x4a26a7-0x4a26ef: mech+0x768/76c/770 <- raw record words
0x26/0x27/0x28 (UpdatePositionDiffrence / UpdateTurnVelocityDiffrence /
UpdateTurnDegreeDiffrence x pi/180 [const @0x4a2d44]). Read at RAW record
offsets -- the Mech__ModelResource struct is layout-skewed (field98 gave
-1.5 where the record holds 0.3; audit filed as task #4, also explains the
old forwardCycleRate "floor 25" hack). Sender triggers now use the
authored constants: pos-deadband type 0, quat-Y delta + yaw-rate delta +
stopped-turn edge type 4 (binary @0x4aad35/@0x4aac2b/@0x4aac6c).
Verified 2-node: madcat streams 0.3/0.045/3deg, type-4 spam gone, walking
replicant clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
25-hit MP autofire trace: kick -> damped oscillation -> settle, peaks well
inside clamps, no NaN/drift; measured Y:X frequency ratio 7.75x matches
sqrt(springK.y/springK.x) exactly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- dpl2d API fully recovered from the binary recorders (@487f34-488630):
opcode model (points/lines/polyline/circle/color/width/matrix/push-pop),
CallList = INLINE include (state persists to caller), centered coordinate
frame (unit = half viewport height). game/reconstructed/dpl2d.cpp rework.
- BTReticleRenderable ctor @004cc40c transcribed with the authentic
calibration (originX .35, originY .25, scaleY .5, 0..1200m right range
ladder, bottom heading tape, FUN_004cd938 tick ladders, lock rings,
turn arrows); range caret slides from the live target range fed by the
mech4 targeting step (BTSetHudTargetRange).
- Weapon pips: the binary gate is IsDerivedFrom(0x511830 =
MechWeapon::ClassDerivations) [T1: part_014.c:5386 hard-aborts on missing
weapon attrs; part_012 counts + roster ORs capabilityFlags@+0x334] so ALL
7 BLH weapons register (3 lasers + 2 PPCs + 2 MissileLaunchers). Pip A
(lit, authored PipColor) on TargetWithinRange, else dark ring B.
- AddWeapon @004cdac0 store map corrected to the verified order
(part_014.c:4827-4837); both state attrs are literally named
"SimulationState" (strings @51d526/51d577) -> weapon simulationState.
- Mech roster this[0x1ef] renamed poweredSubsystems -> weaponRoster
(0x511830 is MechWeapon, not PoweredSubsystem=0x50f4bc); derivation-tag
table added to context/decomp-reference.md.
- Draw hook BTDrawReticle after the 3D scene, cockpit view only. Binary
Execute @004cdcf0 is an un-exported gap -> Draw dynamics [T3], tracked
in context/open-questions.md with the blx_cop canopy + PNAME pip meshes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Answers "does the wreck fade away?": YES, by sinking. FUN_00456410 (the 1996
sink renderable) computes offsetY = rate * t^2; the hulk's authored rate is
-0.025 -> the ~7-unit hulk is fully underground ~17s after the kill. The
script also pairs the standing hulk with the LDBR strewn-debris field (12x13u
flat scatter), parented together and sinking together.
Also verified from the mesh data: BLHDBR (1537 verts -- more than the intact
torso) IS the authored Blackhawk wreck: the classic standing-leg-in-rubble
sculpt. The "just a leg standing there" report is the authentic art.
(THRDBR -- the mesh the 1996 script hardcoded -- parses to ZERO vertices;
more evidence the hardcode was an unfinished dev shortcut.)
Implementation: SwapToWreck adds the ldbr piece; TickWreck applies the
quadratic sink per frame (driven from the dead mech's UpdateDeathState),
hides both pieces at burial and reports it so the wreck-smoke re-arm stops
with the wreck. DPLStaticChildRenderable::SetOffsetTranslation added
(Execute re-reads OrientationMatrix per frame -- same in-place idiom as
SetDrawObj).
Lifecycle verified live: kill -> 'blhdbr.bgf' + ldbr debris -> smoke re-arm
@10s -> wreck buried @~17s -> smoke stops.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The user was right: a dead mech turns into a pile of wreckage. The authentic
1995 chain, recovered end-to-end:
kill -> the victim's per-mech DEATH ModelList ('blhdead'/'lokdead'/'owndead'/
'thrdead', .RES ids 22-25) -> its authored effects: 104 (the WRECK script) +
1007 (dnboom big explosion) + 1001 (ddthsmk rubble smoke plume) + a damage-
smoke burst (3/4/5/15).
Effect 104 = ExplosionScripts case 4 (part_008.c:2663, LIVE in the 1996 binary;
the "disabled" warning is case 6): loads the destroyed hulk + flamesml/flamebig
flame meshes with sweep flicker. Every mech ships its hulk (BLHDBR/MADDBR/
LOKDBR/... + GENDBR generic); the 1996 script hardcoded thrdbr.bgf (dev
shortcut) -- we use the victim's own.
Reconstructed as BTL4VideoRenderer::SwapToWreck: hide every segment mesh, hang
"<prefix>dbr.bgf" on the tree root (pending-swap if death precedes tree build);
routed from the engine's ExplosionClassID dispatch (effect 104 ->
BTSwapMechToWreck(explosion->GetEntityHit())). The kill now fires the
authentic 'blhdead' resource (manual 7+1 pfx calls removed -- the list carries
1007/1001 itself). Verified live:
[death] firing authentic death list 'blhdead' id=22
** effect_number = 104
[BTrender] wreck swap: victim -> 'blhdbr.bgf'
Follow-ups noted: mesh flames + hulk settle (cosmetic), DeathSplash.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Task #32 (death collapse animation) resolved by decomp evidence -- BT 4.11 has
NO collapse animation; the movementMode 5-8 fall latch (clips 0x1c-0x1f) is an
engine-lineage vestige:
(1) the clip-table loader FUN_004a80d4 fills slots 0x00-0x1b + 0x20 (bmp
knockdown) and returns -- slots 0x1c-0x1f are never written;
(2) mech+0x63c..0x648 appear in NO exported function;
(3) no fall clip exists in the shipped 27-clip set;
(4) firing the latch would bind resource id 0 -- a StaticAudioStream -- as
keyframes.
Authentic death modes are the FREEZE modes (IsDestroyed == mode 2||9), so
UpdateDeathState now settles straight to 9 (was a [T3] mode-5 guess that would
trip the garbage latch in the binary). The death READ = freeze + dnboom +
ddthsmk smoke plume + destroyed skins + shutdown; the wreck stands.
Also: damage-band effects orient toward the ATTACKER (impact frame) via
lastInflictingID -- which was declared but never written (recon gap); now
maintained by Mech::TakeDamageMessageHandler, unblocking the DamageZone LOD
same-attacker redirect too.
KB corrected + proofs recorded (combat-damage "Death SEQUENCE", open-questions).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The 'can't kill the enemy / no visible damage' cluster, root-caused and fixed
faithfully:
- STEP-6 unaimed path was INERT: the cylinder table was 'cached' at Wword(0x111)
-- the recon ABSORBER bank (stores nothing, reads 0) -- so every unaimed hit
silently no-op'd. Promoted to the named member Mech::damageLookupTable
(binary this[0x111], was mislabeled ammoExpended). New gotcha class recorded
(reconstruction-gotchas §2) + sweep; 2 dead multiplayer branches logged.
- Fire path migrated off the stale vital-zone aim onto the completed STEP-6
unaimed dispatch (zone=-1 + beam entry point -> cylinder resolves the
exterior zone). No more invisible 1-shot kills; death via the authentic
cascade (~14 center-mass hits). Wreck stays TARGETED on kill (beams stop on
it); scoring latches off.
- SendSubsystemDamage AV fixed: unbound critical-subsystem plug guard (43
unbound plugs/mech logged as an open question -- the binding itself is a gap).
- RemakeEntity (render damage swap): the 1996 render state machine's missing
Remake state, reconstructed as an in-place SetDrawObj mesh swap keyed by each
segment's damage-zone graphic state (tree dtor doesn't cascade -> never
rebuild). Destroyed arms/guns visibly wreck (the only variants the RES
registers).
- BT .PFX particle layer (L4VIDEO.cpp): the 1995 explosion/damage effect layer,
unported since 2007 (DPLIndependantEffect/ReadPSFX/ExplosionScripts all
stubs). Parses the authentic VIDEO/*.PFX definitions via the [pfx_day]
psfxN mapping; premultiplied blending renders BOTH families from the same
data (additive-style fire + occluding smoke -- DDAM2 is 30% grey, DDTHSMK
ramps negative: impossible additively); depth-sorted billboards with a
radial-masked grit sprite; impact-frame orientation (.PFX offsets are
authored mech-local, -Z = out of the struck armor toward the shooter) for
weapon hits AND damage bands (via lastInflictingID, now maintained -- was
declared but never written). Both effect-number encodings route (raw dpl
<100 + WinTesla 1000+slot carried by the band resources). Death fires the
authentic dnboom (7) + ddthsmk smoke plume (1).
- Effects anchor at the impact point / damaged zone's segment, not the mech
origin (no more fire at the feet).
- Dev force-input gates BT_AUTOFIRE / BT_AUTODRIVE for headless fire-chain
verification; BT_PFX_ADD=1 flips the particle blend for A/B.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The "messageBoard" cockpit primitive (the secondary-MFD comm/status message ticker,
L4GAUGE.CFG:4913) was PROSE-ONLY (no bodies/methodDescription) -> parse-skipped. This
was the last unregistered gauge primitive.
Reconstructed byte-verified (Make @4cb678, ctor @4cb704, dtor @4cb788, BecameActive
@4cb7fc, Execute @4cb82c; vtable 0051bddc; sizeof 0xA4). THREE header mislabels fixed
(decode + adversarial verify): int enabled -> Entity* trackedMech (a pointer deref'd at
+0x190, set by SetSource not SetEnable); previousMessageId/previousNameId were SWAPPED
(BecameActive writes 0x9c=-1/0xa0=-2; Execute compares messageId vs 0xa0, name vs 0x9c).
Execute blits the strip cell (id -> (id&3)<<7,(id>>2)<<5) + sender name; methodDescription
= 4 params (rate, mode, btsmsgs.pcx, color). Registered in BTL4MethodDescription[].
DEFERRED / EMPTY by design (authentic for bring-up): the source is never bound (SetSource
has no recovered caller) AND the per-player status queue (StatusMessagePool, btstubs.cpp:62)
is a NULL stub -> no status messages exist -> Execute early-returns on the NULL source (safe
no-op == empty board). Data read via a BTResolveMessageBoard bridge in btplayer.cpp (a real
/FORCE-safe stub returning False; the raw mech+0x190/+0x1dc reads stay in the complete-BTPlayer
TU, dodging the databinding trap). The name-cell path is a marked structural simplification to
restore when the feed lands.
VERIFIED: the gauge parse-skip list is now EMPTY ([gskip]=0 -- every config gauge primitive
registered + built); BTResolveMessageBoard resolves (no /FORCE __ImageBase AV); combat TARGET
DESTROYED, no crash; gauge composite renders identically (300/77, clusters, radar un-regressed).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The "prepEngr" cockpit primitive (the per-engineering-screen static label overlay,
12 CFG calls at L4GAUGE.CFG:4595-4759) was a MISLABELED stub (base Gauge, an Execute
override, mech/screenNumber SWAPPED) with no methodDescription -> parse-SKIPPED, none built.
Reconstructed byte-verified (ctor @4c7bf0, BecameActive @4c7e48, Make @4c7b30; vtable
0051a06c). THREE corrections vs the stub (decode workflow + vtables.tsv proof):
(1) base = GraphicGaugeBackground, not Gauge -- vtable-identical shape to the engine's
BackgroundBitmap (only dtor + BecameActive overridden); (2) the overridden slot is
BecameActive (a paint-on-activation), NOT Execute -- GraphicGaugeBackground has no Execute
virtual, so the Gauge::Execute->Fail->abort hazard doesn't apply; (3) screenNumber@0x6C /
mech@0x70 were swapped. sizeof 0x90.
BecameActive walks the mech roster (databinding-safe GetSubsystemCount/GetSubsystem +
BTGetSubsystemAuxScreen bridge, like VehicleSubSystems::Make), finds the subsystem whose
auxScreenNumber == this screen (1..12), and paints the screen-number numeric + subsystem
label + type-specific label cells dispatched on GetClassID (Sensor/Myomers/Emitter/PPC/
Projectile/Missile/GaussRifle). methodDescription = 9 params (mode, screen, 7 .pcc names).
Registered in BTL4MethodDescription[]. Two raw subsystem reads (heat-sink #, +0x224 label)
are guarded fail-soft best-efforts (marked; the aux-screen bridge label64 substitutes).
VERIFIED: the skip list drops from {prepEngr x12, messageBoard} to just {messageBoard} --
all 12 prepEngr gauges build; no screen-range/crash; boot+sim+combat run; gauge composite
renders identically (COOLANT 300/77, clusters, radar all un-regressed). The prepEngr labels
paint on the Eng (ModeMFD*Eng*) screens, not the default composite view.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The "sectorDisplay" cockpit primitive (Secondary overlay, the radar SECTOR X/Z
coordinate read-out) was PROSE-ONLY in btl4gau3 (placeholder Make, no ctor/
methodDescription/registration) -> the config line was parse-SKIPPED and never built.
Reconstructed byte-verified from the disassembly (ctor @4c9e10, Execute @4ca07c,
methodDescription PE-parse): SectorDisplay : GraphicGauge, sizeof 0xC4. Its Execute
reads the linked mech's world position and shows two 100-unit sector numerics:
numericA = Round(-localOrigin.z * 0.01) + 500
numericB = Round( localOrigin.x * 0.01) + 500
(rounding = round-to-nearest == FUN_004dcd94, corrected from the reviewer's wrong
"truncate" claim; 0.01 const PE-verified; -Z/+X axis + fchs confirmed from asm).
Overridden slots: LinkToEntity(9) caches the subject, BecameActive(3, non-inactivating),
Execute(16) -> satisfies the container-Execute rule. Layout overflow-locked
(static_assert sizeof<=0xC4). Make/ctor/dtor mirror the registered PilotList sibling;
the config image name is copied (nameCopy) since Execute reads it per-frame.
Registered in BTL4MethodDescription[].
VERIFIED LIVE (BT_SECTOR_LOG): Make port=1 pos=(125,579) image=helv15.pcc gridCached=1;
Execute -Z=960.4 X=361.6 -> sectorA=510 sectorB=504 (Round(9.6)+500=510, Round(3.6)+500=504
-- authentic 100-unit sectors from live mech position). Gauge composite renders full,
no crash. The skip list is now exactly the two remaining widgets (prepEngr x12, messageBoard).
Also: a permanent BT_GAUGE_SKIP_LOG diagnostic (GAUGREND.cpp, gated) that logs each
unregistered gauge primitive the dev-parse skips -- the tool that pinned this down
(earlier "not built" runs were killed before the lazy gauge-renderer init).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two coupled fixes so the condenser valve gauge (ValveSetting -> coolantFlowScale
@0x15C) reads its authentic value instead of garbage/zero.
STEP 7 (gating dedup): heat.cpp carried STUB Condenser ctor/dtor/TestClass/
TestInstance/CreateStreamedSubsystem that ODR-duplicated the REAL bodies in
heatfamily_reslice.cpp and WON under /FORCE (heat.obj links first) -> the real
ctor (which sets valveState=1) was shadowed, leaving valveState=0xCDCDCDCD.
#if 0'd the heat.cpp stubs so the reslice ctor (@4ae568, byte-verified: valveState=1,
coolantFlowScale=0, massScale=refrigerationFactor, condenserNumber from name) is the
sole definition. DefaultData/GetClassDerivations/ResetToInitialState (not duplicated)
stay in heat.cpp.
STEP 9 (the real writer): FinishConstruction() at the Mech ctor tail was a no-op
template stub in place of FUN_0049f788 = RecomputeCondenserValves -> coolantFlowScale
was never written (stayed 0). Reconstructed it (byte-verified vs part_012.c:9264):
distribute coolant flow across the mech's condensers, coolantFlowScale_i =
valveState_i / sum(valveState), with the condenserAlarm@0x1DC change pulse
(2-if-flow<=old-else-1, then 0). Walks the populated subsystem roster filtering
Condensers via IsDerivedFrom (behaviorally identical to the binary's @mech+0x7cc
condenser chain, GUID 0x50e4fc). Wired as BTRecomputeCondenserValves(this) at the
Mech ctor post-init pass (binary @9457). _DAT_0049f850 fallback confirmed 0.0f (PE read).
Verified: [valve] the Blackhawk's 6 condensers each read flow=0.166667 (=1/6, total=6)
for both player + spawned enemy, no every-mech crash; combat TARGET DESTROYED,
un-regressed. Diagnostic BT_VALVE_LOG added.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The 0xBBE heat-sink BANK was built as a plain HeatSink, so the numeric-R
cockpit gauge binding HeatSink/AmbientTemperature (L4GAUGE.CFG:4552) had
no publisher -> the LAST unresolved config attribute.
Reconstruct AggregateHeatSink : HeatSink (ctor @4ae8d0, own GUID 0x50e590),
byte-exact + static_assert-locked (heatSinkCount@0x1D0, ambientTemperature
@0x1D4=300, helper@0x1D8 0xC link node, sizeof 0x1E4 == factory alloc @9993).
Publish HeatSinkCount + AmbientTemperature via a dense-prefix attribute table
chained to HeatSink::NextAttributeID (shared HeatSink table unchanged, so
CoolantMass/CoolantCapacity keep resolving). Move CreateHeatSinkBankSubsystem
into heatfamily_reslice.cpp (needs the class def) and build the real class at
factory case 0xBBE; mech.cpp unchanged.
DELIBERATE DEVIATION (documented in the class): keep the base HeatSinkSimulation
the HeatSink ctor installs; do NOT reimplement the authentic Performance @4ae73c
-- it derefs a raw self+0xE0 -> [+0x158] that does not map in our compiled layout
(AV/NaN, and runs for EVERY mech), and ambientTemperature is a frozen constant so
the gauge reads 300 either way. Authentic relaxation model deferred.
Verified: [attr] HeatSink/AmbientTemperature OK; all 50 config attribute
bindings resolve (0 NULL); no every-mech crash; combat TARGET DESTROYED,
FIRED #41+, un-regressed.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
