CydandClaude Opus 5 bfd5fa163e EXIT GAME on the console screen
,noframe takes the title bar away, and with it the only way out of the
game. The console screen now offers its own, bottom left: half width and
diagonally opposite LAUNCH GAME, because it is the one button on that
screen you cannot undo and it should not sit next to the one everybody
is aiming for.

It goes through the same door as closing the window - fe.closed, so
RPL4FrontEnd_Run returns False and the race loop breaks - rather than
opening a second shutdown path.

Two things had to move for it to make sense.

The saved placement now loads in RPL4.CPP, right after the main window
is shown, instead of only when SVGA16 builds the cockpit. That was not
until a mission started, so the console screen came up at the default
rect with its title bar still on and the window only jumped to the saved
placement once a race began - which, for a flag whose whole purpose is
to take the title bar off, meant it did nothing on the screen you land
on. RPL4.CPP now owns the main window's registration outright and
SVGA16's branches only reload; the reload after CockpitShellProc goes on
still matters, since its WM_SIZE is what re-fits the canvas.

That in turn made the exploded view's position-only registration
incoherent - the startup load had already applied the size - so the
game window is simply position and size everywhere now. The earlier
reasoning that its exploded size IS the -res render size does not hold:
the back buffer stretches to the window in either view, exactly as it
does for the cockpit.

WM_EXITSIZEMOVE moves from the cockpit subclass to RPL4.CPP's own
WndProc, which the subclass chains to anyway. In its old home it only
existed once a cockpit had been built, so dragging the window on the
console screen - the obvious moment to put it where you want it - saved
nothing. There is also a save on the way out of WinMain, for a session
that never started a race and so never ran SVGA16's teardown save.

Verified: on a bare-framed window the console screen comes up at the
saved 1280x760 with client == window rect, EXIT GAME ends the process
with code 0, and a screenshot shows it clear of the column content. A
console-only session dragged to 333,222 900x640 wrote that on the drag,
kept it through the exit, and came back to exactly it on relaunch -
without a race anywhere in the round trip. The noframe and cockpit
round trips still pass unchanged.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-07-29 10:01:16 -05:00
2026-07-29 10:01:16 -05:00
2026-07-29 10:01:16 -05:00
2026-07-27 22:18:05 -05:00

Red Planet 4.12 — the Steamification

Red Planet is VWE's pod-racing game: eight-player VTV contests on Mars — Martian Death Race and Martian Football — originally played from inside VWE Tesla cockpit pods. This repo is the third life of that code:

Generation What it was
Red Planet 4.10 The original game, running on the Tesla 1 pod platform (DOS-era MUNGA engine, serial RIO cockpit hardware, operator console, batch-file relaunch between missions)
Red Planet 4.11 The Win32 port of 4.10 (RP411) — DirectX 9, WinSock TCP, TeslaConsole/TeslaLauncher session control; still runs in pods, still a LAN
Red Planet 4.12 This repo: the Steamification of 4.11 — the same engine, the same wire protocol, the same missions, made distributable on Steam and playable over the internet with no cockpit hardware

The architecture is deliberately conservative: the VWE's design survives intact, with each pod-era dependency replaced by a consumer equivalent behind the engine's existing seams.

Arcade (4.10/4.11) 4.12 replacement
RIO cockpit board (serial) PadRIO — virtual RIO from XInput pad + keyboard, fully rebindable (bindings.txt, vRIO profile format)
Seven physical displays Single-window cockpit — all displays composed on a locked 1920×1080 canvas around the viewscreen, with the real button banks lamp-lit and clickable
Pod button lamps On-screen lamps, plus an RGB keyboard mirror (Windows Dynamic Lighting)
TeslaConsole operator In-game front end — race setup menu builds the mission egg locally; an in-process console marshals every race (missions still only end on a console stop, exactly as designed in 1994)
TeslaLauncher relaunch-per-mission Single binary — menu → race → results → menu in one process
WinSock TCP LAN mesh NetTransport seam — the deterministic pod mesh unchanged, running over plain TCP (LAN/dev) or Steam Networking Sockets (FakeIP + Steam Datagram Relay)
Site network / fixed IPs Steam lobbies — lobby owner is the console; members exchange FakeIPs and loadouts as lobby data

Status: it works. v4.12.2 carried the first verified end-to-end internet build: three machines, three Steam accounts, lobby → mesh → marshaled five-minute race → deaths and respawns → timed stop → results on every machine → rematch from the same lobby.

v4.12.3 is about the screen. The cockpit now scales up as well as down and re-fits whenever the window changes, keeping 16:9 so a wide panel letterboxes instead of stretching; -fit runs it borderless over the whole monitor and picks the render size to land on the viewscreen 1:1. The displays are the player's to arrange — each of the six can be scaled on its own and the radar moved out of the middle of the road (environ.ini). Each display's button bank now reaches under its glass, so the picture itself is the press target rather than a sliver at the edge.

v4.12.4 is about the lobby. Both rooms now show the host's mission setup — the track, then time of day, weather and game length — since everyone flies the owner's picks and it was the one thing in the room nobody could see for themselves. The football team sheet names each player's VTV beside their team colours and position. And a lobby holds eight players rather than four, a full grid as the pod hall ran it, with the room sizing its roster to whatever space the window gives it.

v4.12.5 restores the Winners Circle. The pod hall stood the finishers on a numbered award platform when the race ended, and all of it was still in this repo — the stand, eight ranked spots in every map, and the code to put racers on them — wired only into the mission-review build and so never once run by a pod. The race now fades out and fades back in on the platform: finishers in finishing order, each pilot's callsign on the plate beside their spot, the cockpit glass cleared away, held for a few seconds before the results screen. Three pieces of it had been stubbed out in the D3D9 port and are working again.

Playing

Grab the release zip (or run pack-dist.ps1 on a build). Single player: run start-windowed.bat — the game boots into the setup menu, where the SCENARIO group picks Death Race or Football (Football swaps in the team/position columns and its own track list). Steam multiplayer: see docs/STEAM-3-MACHINE-TEST.md (until RP412 has its own AppID it runs under Spacewar, 480).

The two config files beside the exe are self-documenting: environ.ini (every engine option, commented) and bindings.txt (every key, pad button, and axis; written with the full default layout on first run). Default controls: numpad flies (8/2/4/6 stick, 7/9 pedals, 0 trigger), Shift/Ctrl throttle, Alt reverse, arrows look, Space fires, letter rows are the MFD button banks as printed on the panel. Alt+Q aborts a mission. Full map with pad and keyboard diagrams: docs/CONTROLS.md.

Building

VS 2022 (v143) + DirectX SDK June 2010 + the vendored Steamworks SDK (extern/steamworks_sdk_164) — see BUILD.md. Solution WinTesla.sln, configuration Release|Win32, output Release\rpl4opt.exe.

Documentation

Doc Contents
docs/CONTROLS.md Controls map — pad and keyboard diagrams, the panel button banks, rebinding
docs/RP412-ROADMAP.md The original plan and workstreams
docs/RP412-FRONTEND-DESIGN.md TeslaConsole analysis, the egg format, the console protocol, and the Steam mapping — with status notes as each layer landed
docs/STEAM-3-MACHINE-TEST.md Multiplayer test procedure, Steam Input notes, the abort key
BUILD.md Toolchain and build steps

Dev tooling: tools/two-pod-test.ps1 races two pods on loopback, marshaled by a console feeder speaking the arcade Munga protocol.

Repo Role
RP411 Upstream: the Win32 arcade port this repo Steamifies (full history preserved; remote rp411 for cross-pulling fixes)
VRIO Virtual RIO panel + vPLASMA — source of the bindings format, the cockpit layout, and the keyboard lamp mirror
TeslaSuite TeslaConsole / Launcher / vPOD — the arcade session-control stack 4.12 absorbed (and the reference implementation of the Munga control protocol, TCP 1501)
S
Description
No description provided
Readme
88 MiB
Languages
C++ 86.5%
C 12.8%
PowerShell 0.5%
Assembly 0.2%