TeslaRel410/emulator/firmware-decomp/MICROCODE-DECODE-NOTES.md

PXPL5 IGC micro-code — decode notes (session 6j, 2026-07-16)

Working notes toward executing the compiled IGC micro-code so the ground/sky (which carry no stored VSTRIP vertices) can be rendered. Complements igc_array.py (the array's computational model) — this is about the actual compiled stream the DMA ships.

The per-region DMA command list is decoded (from real capture)

0xf0411cd4 (fst.d) copies each screen region's DMA command list into its queue page. Captured from the cap7 death-cam draw (scratchpad/coefdump.py), one region's list (@ 0x0801fa40) decodes cleanly against DMAENGN.H as {addr, opcode} 64-bit pairs (opcode = top nibble, low 7 bits = word count):

0x08015000  SEND(4)       ; edge coefficients
0x00000000  FLUSH
0x08015020  SENDE(0x45)   ; z / colour  (69 words)
0x00000000  FLUSH
0x08014100  TXDN
0x08015260  SEND(0x21)    ; 33 words
0x08015380  SEND(0x29)    ; 41 words
0x00000000  TILE(id)      ; per-region tile id in the addr slot (0x20/0x40/0x60/…)
0x0801f008  GOTO          ; link to the next region's queue
0x08015000  FLUSH
0x08015000  SEND(0x10)
0x08015000  FLUSH

Key: every region's list references the same payload addresses (0x08015000, 0x08015020, …) and differs only in the TILE(id) slot and the GOTO link. The geometry micro-code is tile-relative and broadcast to every tile the primitive covers — the array evaluates it at each tile's own origin. So this whole list is one primitive across many tiles; other primitives (terrain, sky) have their own DMA lists pointing at their own payloads.

The SEND payloads carry embedded FLOAT coefficients

Dumped the payloads (scratchpad/payload_dump.py). They are not opaque — they interleave control words with recognisable IEEE-754 floats = the edge / plane / colour coefficients:

SEND(4)  @0x08015000 :  00000100  3e013991(=0.1262)  0000ec00  0000…      ; edge
SENDE    @0x08015020 :  00000100  3a804834(=9.79e-4)  8401213a  00000021  ; z/col
                        ba01253a(=-4.93e-4) 00143a21 8381213a 00000022    ; per bit-plane,
                        ba01253a(=-4.93e-4) 00133a22 8301213a 00000023    ; addr 0x21,0x22,…
                        …  (a bit-serial MEMpluseqMEM sweep: the float is the
                            increment, the control words carry the target
                            bit-plane address + length)
SEND(0x21) @0x08015260:  floats 0.1253, 9.79e-4, 0.1262, 0.00111, -0.0157, -0.0078 …
SEND(0x29) @0x08015380:  floats -0.00196, -0.0627 (repeated per bit-plane) …

Interpretation: 00000100 recurs as an instruction header; each coefficient load is {header, float, control(addr/len), addr}. The repeated float with an incrementing address (0x21,0x22,0x23,…) is the bit-serial plane interpolation (IGCOPS.C MEMpluseqMEM) sweeping the bit-planes of a z/colour value, the float being the Ax+By+C increment.

The SENDE sweep has a regular 4-word instruction stride

After the 00000100 header + a base float, the z/colour SENDE settles into a clean 4-word instruction (scratchpad analysis):

word0  increment float   (e.g. -4.93e-4, constant across the sweep)
word1  00 LL 3a AA        ; LL = a length/countdown (0x14,0x13,0x12,… decrementing)
                          ;      AA = a bit-plane address (0x21,0x22,0x23,… incrementing)
word2  8H 01 21 3a        ; H high-nibble drifts down (0x84,0x83,0x82,…) -> op/plane sel
word3  00 00 00 NN        ; NN = destination bit-plane (0x21,0x22,…)

i.e. a MEMpluseqMEM sweep: add the increment to each successive bit-plane of the z (or colour) word, LL bit-planes long. The float is the Ax+By+C plane increment; the control words carry the target bit-address + length. So a plane value is reconstructable as {base float, per-x/per-y increment floats, bit window} once the control-word field split is pinned.

What this changes

The micro-code decode is now extraction + bit-serial execution, not blind ISA reversing:

1. parse the payload into {op-header, float, bit-addr, len} instructions,
2. map each float to its plane role (edge A/B/C, z, r/g/b) by position,
3. drive igc_array.py's pixel-memory with the real coefficients per tile (the array already does eval_ltree + z-buffer + readout).

Blocker to a clean full decode: igc_opco.h (the opcode encoding header, \projects\dbi0150\dbi0151\ucode\igc_opco.h) is not in the dump — the 00000100 / 0x3a.. control-word field layout has to be reversed from these examples + IGCOPS.C op semantics + the emit sites in EOF.S/PXPL5OK.SS.

Next session

• Reverse the control-word layout (header 00000100; the ..3a / 0x21 fields = op + bit-address + length) from the SENDE sweep (cleanest, most regular).
• Extract the object's edge+z+colour floats, feed igc_array.py, confirm it reproduces the object from the real coefficients (not the geometry-derived ones).
• Then walk every region's DMA list, run all payloads tile-by-tile → full frame.
• Tools: scratchpad/coefdump.py (DMA lists), scratchpad/payload_dump.py (payload floats). Restore from scratchpad/snapv2.pkl (cmd 735 death-cam).