CydandClaude Fable 5
475ae3106e
pod_render_norio.conf is pod_render_rec.conf with one line changed, serial1=disabled instead of the vrio named pipe. Same binary, same egg. With it, our build launches and the mech walks: [launch] state=2 minPriorityEmpty=1 ticks=85316 [queues] p0=- p1=- p2=BUSY p3=- p4=- BTL4Application::RunMissionMessageHandler Turning Plasma Score Display On [sim] pos=(180.466,10,-358.703) yaw=-0.275605 spd=14.4 [sim] pos=(251.959,10,-250.498) yaw=-0.89103 spd=14.4 No fault, 290 log lines and counting. This is the first time the reconstruction has reached a running mission on the pod. The hang was never starvation, a deadlock, or a refill loop -- it was VOLUME, the first candidate I listed and then talked myself out of. 530 renderer events queue at priority 0 during load; BackgroundTasks::Execute runs exactly one task per call round-robin over seven tasks, and the 1ms frame budget is always blown here so no extra background passes happen. That is ~9 events per real second, so a load legitimately takes ~60s. The fault arrived at ~40s, before the backlog could clear. Every 'the queue never drains' reading was really 'the process dies before it can'. The disproof was already in hand: the post tally climbed to 530 and went FLAT, which means nothing was refilling. p0=BUSY with nextReady=1 is equally consistent with a large finite backlog still draining, and I read it as refill. Why the RIO port: the pipe has no server attached, which should behave as an unplugged cable. The emulator log shows steady serial1 RX overruns, our build prints 'RIO never came back from test mode!', and the SHIPPED binary prints 'lost RIO analog request' and launches anyway on this identical rig. So an unplugged RIO is survivable and our handling of it is not -- a real defect, not a rig artifact, since a pod with an unplugged RIO cable should still boot. The wild reference at EulerAngles::operator=(const LinearMatrix&)+0x19 is still unexplained, but it is now reproducible on demand by enabling serial1 rather than being a coin flip. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
79 lines
2.4 KiB
Plaintext
79 lines
2.4 KiB
Plaintext
[sdl]
|
|
output=opengl
|
|
# higher,higher not highest: HIGH_PRIORITY_CLASS starved the host desktop;
|
|
# with the retry patches a rare dropout self-recovers (see gauge_rio.conf).
|
|
priority=higher,higher
|
|
[dosbox]
|
|
memsize=32
|
|
machine=svga_s3
|
|
[cpu]
|
|
core=dynamic
|
|
cputype=pentium
|
|
cycles=max
|
|
[sblaster]
|
|
sbtype=sb16
|
|
sbbase=220
|
|
irq=5
|
|
dma=1
|
|
hdma=5
|
|
[mixer]
|
|
# match the EMU8000s' native rate (no resample) and buffer ~60ms so brief
|
|
# emulation-thread stalls (RIO retry recovery) don't audibly chop
|
|
rate=44100
|
|
blocksize=1024
|
|
prebuffer=60
|
|
[serial]
|
|
# RIO on COM1 with the low-latency options (rxpollus/rxburst) so the board's
|
|
# few-ms ACK deadline is met; plasma display on COM2 (real pod has both).
|
|
# VWE fork namedpipe backend (com0com/realport retired -- COM1/COM2 gone):
|
|
# DOSBox = pipe client (retry), vRIO/vPLASMA apps = servers; an unconnected
|
|
# pipe behaves as an unplugged cable so the mission still runs. serialnamedpipe.h
|
|
serial1=namedpipe pipe:vrio rxpollus:100 rxburst:16
|
|
serial2=namedpipe pipe:vplasma
|
|
|
|
# live UNBUFFERED game output: DOS char devices are not buffered, so
|
|
|
|
# redirecting stdout to COM3 lands every line immediately. A normal
|
|
|
|
# '> file' redirect stays 0 bytes until the process exits, which hides
|
|
|
|
# all progress on a run that does NOT crash.
|
|
|
|
serial3=file file:C:\VWE\TeslaRel410\emulator\render-bridge\podlog.txt
|
|
[autoexec]
|
|
mount c "C:\VWE\TeslaRel410\ALPHA_1"
|
|
c:
|
|
cd \REL410\BT
|
|
set VIDEOFORMAT=svga
|
|
rem production pod card init (PARAMETR.BAT:181-186): DIAGNOSE + AWEUTIL per
|
|
rem card -- AWEUTIL /S does the EMU8000 bring-up and DRAM detect the HMI SOS
|
|
rem driver relies on; skipping it left the cards uninitialized (silent).
|
|
rem aweutil /s SKIPPED for now: it verifies the AWE32 GM ROM, which the
|
|
rem emulated cards lack (hangs in a retry loop) -- restore once the ROM is
|
|
rem dumped from a real card. diagnose /s kept (passes, sets mixer config).
|
|
set BLASTER=A220 I5 D1 H5 P330 T6
|
|
c:\sb16\diagnose /s
|
|
set BLASTER=A240 I7 D3 H6 P300 T6
|
|
c:\sb16\diagnose /s
|
|
set BLASTER=A220 I5 D1 H5 P330 T6
|
|
set TEMP=c:\
|
|
rem arena1 city mission (TESTARN.EGG: map=arena1, time=day) with the RIO
|
|
rem attached; stdout redirected so mission-load progress survives kills.
|
|
set BT_NO_SKL=1
|
|
set BT_STACK_LOG=1
|
|
set BT_MER_LOG=1
|
|
set BT_LAUNCH_LOG=1
|
|
set BT_FORCE_THROTTLE=0.6
|
|
set BT_FORCE_TURN=0.25
|
|
set HEAPSIZE=15000000
|
|
set L4GAUGE=640x480x16
|
|
call setenv.bat r s n p
|
|
32rtm.exe -x
|
|
BTL4REC.EXE -egg testarn.egg > COM3
|
|
|
|
echo GAME-RC=%errorlevel% >> RC.TXT
|
|
32rtm.exe -u
|
|
echo ALPHA1-RUN-DONE
|
|
pause
|
|
|