The playtest report (sound plays, no gauge drop, no cloud) traced to the
Reservoir's InjectCoolant chain being dead in three places:
- The handler was never REGISTERED: the binary's Reservoir handler table
@0x50e680 has one entry {4, "InjectCoolant", @4aee70}; added
Reservoir::GetMessageHandlers + the press/release handler (press starts
the flush gated on coolantLevel@0x12C > 0 -- the old body misread +0x12C
as currentTemperature; release stops it; novice lockout via FUN_004ac9c8).
- Reservoir::InjectCoolant (@4aefa4, 1019 bytes) was an empty stub -- the
drain the coolant gauge reads. Reconstructed in full: work list =
condenser/weapon/heatable chains (+0x7cc/+0x7bc/+0x7ac, roster-walk
emulation with the binary's duplicate-visit weighting; HeatSink-filtered
[T2 guarded]) + the linked master sink; per sink with flowScale != 0 move
squirtMass x flowScale x dt (clamped to the tank / sink capacity) and
credit pendingHeat with the negative carried-heat delta capped at
sinkMass x reservoir startingTemperature -- the set%-biased flush of the
manual (p24), riding the existing heat model.
- Two latent ctor decode bugs surfaced and fixed: the master gate @4af408
(and @4aeb40 HeatWatcher, swept) reads the OWNER MECH's simulationFlags
(*(param_2+0x28)), not the resource's subsystemFlags (the misread left
the CoolantSimulation Performance unregistered); and the capacity scale
FILDs the bank's INTEGER HeatSinkCount ((float10)*(int*)(link+0x1d0)) --
the float reinterpret gave ~1e-44 -> a permanently empty tank.
Capacity = 0.05 x heatSinkCount x streamed CoolantCapacity (BLH: 6.0).
Visual: the binary's mode-1 coolant-effect renderable (FUN_00456a68, built
for classID 0xBC0 on "ReservoirState", part_014.c:5439; tick @part_007.c:
8780) starts psfx 19 = FLUSH.PFX ("Coolant flush", BTDPL.INI) when the
state changes to 1 -- BTSpawnFlushCloud (mech4.cpp) spawns it on the same
alarm edge as an attached emitter at torso height.
Input: new CONTROLS.MAP action "Flush" on 'H' (HELD; press+release both
dispatch, the held-button payload). Diags: BT_FLUSH_LOG, BT_FLUSH_TEST.
Verified live (FOGDAY): [flush] Reservoir level 6 -> 0.13 -> 0 over ~0.6 s
held (= the manual's 3-4 punches to empty), the coolant vertBar source
Reservoir/CoolantMass drains, and the bluish condensation cloud rises from
the mech (scratchpad/flush_cloud.png vs flush_before.png).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Brings Cyd's experience-level / simulation-mode research onto master (the
KB-decode portion of glass-cockpit 4e01e83; the bundled BT410 source
manifest is left for the full glass-cockpit merge).
- context/experience-levels.md (NEW): the egg per-pilot 'experience' field
(novice/standard/veteran/expert) is the pod's SIMULATION-FIDELITY tier,
decoded end-to-end. FUN_004c0bc8 reads btMission->experienceLevel(+0xe4)
and fans it into the +0x25c/+0x260/+0x26c/+0x270/+0x274 flag block:
+0x25c 'sim live' (novice lockout: jams/searchlight/powersub), +0x260 the
HEAT-MODEL master switch (veteran+expert; FUN_004ad7d4), +0x274 raw level
(FUN_004ac9c8 = ==0 novice predicate; the valve/advanced-cockpit lockout).
4.0->4.10 drift: the viewscreen hunting-aid gate is GONE in 4.10 (HUD reads
none of these flags), and movement heat is veteran+expert not expert-only.
- btplayer.cpp/.hpp: CORRECTED comments/labels -- the +0x25c..+0x274 block is
seeded from btMission experienceLevel/advancedDamageOn, NOT the scenario
role's returnFromDeath; the 'roleClassIndex/showKills' names are scoring-era
mislabels. Code logic UNCHANGED (comment-only): the ctor still reads
scenarioRole (STAND-IN, defaults 2 = veteran) pending the wiring task.
- Corrections swept into gauges-hud.md (ROOKIE->novice lockout),
open-questions.md (player+0x260/0x274 semantics now PINNED),
pod-hardware.md, subsystems.md, decomp-reference.md; CLAUDE.md router row.
No code-logic change -> no rebuild needed (comment + markdown only). The
runtime wiring (seed from BTMission::ExperienceLevel()) remains TODO.
Co-Authored-By: Cyd <cyd@falloutshelterarcade.com>
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Investigation (workflow) found the searchlight-driven fog swap never worked in the
ORIGINAL 1995 binary either -- it's a latent bug, not a port regression:
SearchlightSimulation (@004b841c) reads requestedOn@0x1E0 (never written) while
ToggleLamp (@004b860c) toggles commandedOn@0x1DC; no bridge exists, so lightState
@0x1D8 is perpetually 0 (lamp never lights). The self-consistent sibling
ThermalSight reads the field it toggles (0x1DC) -- the tell. The port reproduces
the bug faithfully (searchlight.cpp:189). Additionally the port never constructs
PullFogRenderable, so even absent the bug the swap wouldn't fire.
Decision: LEAVE AS-IS + document (faithful to the buggy original); the port keeps
the static lights-ON fog= values. A working swap would DEVIATE from the shipped
binary (repair the sim to read commandedOn + construct PullFogRenderable at the
btl4vid MakeMechRenderables inside pass + a toggle input) -- fully scoped in the KB
if ever wanted. No code change this commit.
Documented in rendering.md (fog section), open-questions.md (deferred subsystems),
subsystems.md (Searchlight). Core per-map/time/weather fog (task #63) is unaffected.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The MadCat torso twists, the view turns with it, and targeting follows.
Three reconstruction fronts closed:
THE ELECTRICAL WATCHDOG CHAIN (why the torso never powered up):
- PowerWatcher::UpdateWatch reconstructed (@004b181c, the REAL registered
Performance -- PTR @0050f5fc; Ghidra missed the fn start): the watchdog
MIRRORS the watched subsystem's electrical level (+0x278), brownout
downgrade when gen output <= minVoltage% x rated. @004b1804 relabeled
ResetToInitialState (slot 10) -- the old "Simulation" tag was wrong.
- The factory watcher-CONNECT pass reconstructed (vtable slot +0x38,
@004aee2c/@004b1a40 byte-identical, recovered from raw exe bytes):
watchedLink.Add(roster[watchedSubsystem]) on the master node. Was the
SubProxy::Start() no-op -- every watchdog sat at 0 forever.
- MinVoltageScale = 0.01 (a 10-byte x87 literal @0x4b1924; was 1.0f =
permanent brownout) and PowerWatcher's Derivation chains its REAL base
HeatWatcher (the HeatableSubsystem stand-in broke IsDerivedFrom for the
whole Torso/Searchlight/ThermalSight family).
- KB correction swept: derivation tag 0x50e604 = HEATWATCHER (not
"HeatSink"); the btl4gaug heat-widget gate now tests it via the
BTIsHeatWatcher bridge.
THE CROSSHAIR (task #58 forensics, 6-agent workflow + live probes):
- The VIEW is TORSO-MOUNTED: jointtorso -> jointeye -> siteeyepoint in
every twist-capable .SKL; the camera + canopy ride the same hinge
subtree through HingeRenderable's live matrix-stack compose -- ALREADY
WORKING in the port. The crosshair stays screen-centered (center IS
the boresight); the twist reads on the tape carets/compass/radar.
- The real bug was the port's gBTAimX = tan(twist) slew (the falsified
"body-mounted view" model): the camera already carried the twist, so
the crosshair counter-slid to hull-forward and the fire ray with it.
Deleted; the pick ray inherits the twist from the yawing eye basis.
- Two instrumentation traps documented (chase-eye-as-default-camera,
BT_FORCE_TORSO clobbering real joints -> the hook now only fills
unresolved ones); an over-correcting explicit eye compose was added on
those false readings and retired the same day.
CONTROLS + REPLICATION:
- Q/E spring-center on release (the axis is a twist-RATE demand; the old
hold-deflection model drifted forever); X also zeroes the axis and
pulses the authentic torso Recenter (@004b6918). M cycles control
mode via the real CycleControlMode body.
- Torso update-record DIRECTION fixed: engine truth is Write=serialize /
Read=apply; @004b6a78 is the READ (was mislabeled Write) and the
missing WRITE @004b6a1c recovered from raw disasm (recordLength 0x1C,
twist/vel/rate at +0x10/14/18) -- kills the replicant's 0xCDCDCDCD
-140-degree ghost twist.
- Marching-ghost desync: 4 Standing-case guards zero stale reverse
cycleSpeed (negative cadence passed the <= ZeroSpeed stop gate).
- Kill credit rerouted to the OBSERVED killer (lastInflictingID ->
killer's player link) -- kills count, target K/D populates.
KB: subsystems.md (watcher chain), multiplayer.md (record direction),
combat-damage.md + gauges-hud.md + cockpit-view.md (torso-mounted view
re-correction), decomp-reference.md (new addresses + tag fix),
open-questions.md (dead capability-roster loops 2-4, snapshot CD read).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
ConsolidateAndSendDamage @0049b784 fully implemented: the beam path submits
into AddDamageMessage; each messmgr tick builds ONE Entity::
TakeDamageStreamMessage (id 0x13; wire-verified 0x34+4+Nx12) with the
common impact record + appended {type, amount, subsystemID} entries and
Dispatches it at the victim -- the T0 handler (ENTITY.cpp:817) re-splits
into per-record TakeDamage; replicants reroute cross-pod. Real
ResolveExplosionID (firing weapon's +0x3E4, guarded) + SubmitExplosion via
the Explosion::Make port; TWO chain-purge bugs fixed (the "iterator dtor
clears it" assumption was wrong -- records re-applied every tick, observed
1->2->3->4 double-counting). @004b9728 identity corrected (SendDamageMessage,
not DrawWeaponPip). Verified solo: 25 clean single-record consolidations ->
kill -> death transition. Residue: weapon-side submission awaits the
damage-economy reconciliation (authored 0.25-scale vs kShotDamage=12).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Propagate the verified finding (0xBD3 = damage/explosion hub @0x434, NOT the valve/message
gate; the valve/Myomers gates read the owning BTPlayer @mech+0x190) into the topic files that
still carried the old claim: decomp-reference (ClassID row + both offset rows), gauges-hud,
subsystems, open-questions (Myomers coupling), + frontmatter. Graph validates clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
