Release 4.12.6

Seven commits since 4.12.5, all about where things sit on screen.

RP412MFDLAYOUT remembers window placement across the menu-race-menu
loop, in mfd_layout.cfg beside bindings.txt: the game window, the
exploded view's display panes, and the plasma glass. Append ,noframe to
a line to take that window's title bar and border off - a cockpit
filling a monitor edge to edge at a rect you chose, where -fit could
only do it by taking the whole screen.

That needed a way out of a window with no title bar, so the setup screen
carries an EXIT GAME button, bottom left and diagonally opposite LAUNCH.

The Steam host/join buttons dim and say STEAM NOT RUNNING rather than
disappearing - two buttons quietly missing reads as a broken build.

And the Winners Circle camera is framed off the award stand rather than
off whoever is standing on it. It had been averaging the filled spots,
which moved the shot with the head count: eight finishers put the eye 24
units closer to the stand and aimed it at the middle of the tiers
instead of at the winner. The framing constants are untouched, so the
shot everybody gets now is the one that was dialled in.

Version strings bumped in RPL4.CPP, pack-dist.ps1 and the controls page
that ships in the zip.

Built clean, packed, and smoke-tested from the dist: boots to the
console screen reporting 4.12.6, virtual RIO up, Steam transport up,
nothing alarming in the log.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

.gitignore

@@ -40,6 +40,11 @@ ipch/
 *.log
 rpl4.log
 
+# Where the game window and the exploded view's panes were last dragged
+# to (RP412MFDLAYOUT). Per-machine by nature - it is screen coordinates
+# on somebody's desk.
+mfd_layout.cfg
+
 # Build-output static libs that land in lib/ (the two committed dependency
 # libs, OpenAL32.lib and libsndfile-1.lib, stay tracked).
 /lib/Munga_L4.lib

MUNGA_L4/L4MFDVIEW.cpp

@@ -10,6 +10,74 @@ namespace
 
 	const int buttonGap = 4;
 
+	//---------------------------------------------------------------
+	// Sticky placement for the exploded view. See L4MFDVIEW.h; ported
+	// from BT411's BT_GLASS_LAYOUT.
+	//---------------------------------------------------------------
+	enum { LayoutOff = 0, LayoutLoad, LayoutSave };
+
+	const char layoutFileName[] = "mfd_layout.cfg";
+
+	// every window taking part, so Save can walk them
+	enum { maxLayoutWindows = 12 };
+	struct LayoutWindow
+	{
+		void		*window;
+		const char	*title;
+		Logical		withSize;
+		Logical		bare;		// frame stripped, per the file
+	};
+	LayoutWindow layoutWindows[maxLayoutWindows];
+	int layoutWindowCount = 0;
+
+	//---------------------------------------------------------------
+	// Take a window's frame off: no title bar, no border, nothing to
+	// drag it by. WS_SYSMENU stays - it draws nothing once the caption
+	// is gone, but without one DefWindowProc will not honour Alt+F4,
+	// and a bare window with no way to close it is a trap.
+	//---------------------------------------------------------------
+	void StripWindowFrame(HWND window)
+	{
+		LONG_PTR style = GetWindowLongPtrA(window, GWL_STYLE);
+		style &= ~(WS_CAPTION | WS_THICKFRAME | WS_MINIMIZEBOX |
+			WS_MAXIMIZEBOX | WS_BORDER | WS_DLGFRAME);
+		style |= WS_POPUP;
+		SetWindowLongPtrA(window, GWL_STYLE, style);
+	}
+
+	int LayoutMode()
+	{
+		static int mode = -1;
+		if (mode < 0)
+		{
+			const char *setting = getenv("RP412MFDLAYOUT");
+			if (setting == NULL || setting[0] == '\0')
+			{
+				mode = LayoutOff;
+			}
+			else if (!stricmp(setting, "off") || !stricmp(setting, "0"))
+			{
+				mode = LayoutOff;
+			}
+			else if (!stricmp(setting, "load") || !stricmp(setting, "restore"))
+			{
+				mode = LayoutLoad;
+			}
+			else	// save / adjust / on / 1
+			{
+				mode = LayoutSave;
+			}
+
+			if (mode != LayoutOff)
+			{
+				DEBUG_STREAM << "MFDLayout: RP412MFDLAYOUT="
+					<< ((mode == LayoutSave) ? "save" : "load")
+					<< " (" << layoutFileName << ")\n" << std::flush;
+			}
+		}
+		return mode;
+	}
+
 	//---------------------------------------------------------------
 	// Button banks run UNDER the glass: a button reaches this far in
 	// from the display edge, but only the indicator strip clears that
@@ -108,6 +176,15 @@ namespace
 			}
 			break;
 
+		case WM_EXITSIZEMOVE:
+			//
+			// A drag just finished. Write the whole arrangement now rather
+			// than trusting teardown, so a hard kill still leaves the
+			// layout that was on screen. No-op unless the mode is save.
+			//
+			RPWindowLayout_Save();
+			return 0;
+
 		case WM_CLOSE:
 			// Part of the cockpit; just hide it.
 			ShowWindow(hwnd, SW_HIDE);
@@ -148,6 +225,8 @@ MFDSplitView::MFDSplitView(
 	sourceHeight = source_height;
 	buttonCount = 0;
 	pressedIndex = -1;
+	paneTitle = title;
+	ownWindow = (parent == NULL) ? True : False;
 
 	pixels = new unsigned long[source_width * source_height];
 	memset(pixels, 0, source_width * source_height * sizeof(unsigned long));
@@ -230,6 +309,14 @@ MFDSplitView::MFDSplitView(
 	{
 		SetWindowLongPtrA((HWND) window, GWLP_USERDATA, (LONG_PTR) this);
 		ShowWindow((HWND) window, SW_SHOWNOACTIVATE);
+
+		// only the exploded view's own windows can be dragged, so only
+		// those have a placement worth remembering. Position only - see
+		// RPWindowLayout_Register.
+		if (ownWindow)
+		{
+			RPWindowLayout_Register(window, paneTitle, False);
+		}
 	}
 	else
 	{
@@ -241,6 +328,9 @@ MFDSplitView::~MFDSplitView()
 {
 	Check_Pointer(this);
 
+	// out of the layout registry before the window goes
+	RPWindowLayout_Forget(window);
+
 	if (window != NULL)
 	{
 		SetWindowLongPtrA((HWND) window, GWLP_USERDATA, 0);
@@ -259,6 +349,272 @@ Logical
 	return pixels != NULL;
 }
 
+//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+// Join the saved layout. Registering twice just refreshes the entry, so
+// a window re-registering after being rebuilt is harmless.
+//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+void
+	RPWindowLayout_Register(void *window, const char *title, Logical with_size)
+{
+	if (window == NULL || title == NULL)
+	{
+		return;
+	}
+	for (int i = 0; i < layoutWindowCount; ++i)
+	{
+		if (layoutWindows[i].window == window)
+		{
+			layoutWindows[i].title = title;
+			layoutWindows[i].withSize = with_size;
+			return;
+		}
+	}
+	if (layoutWindowCount >= maxLayoutWindows)
+	{
+		return;
+	}
+	layoutWindows[layoutWindowCount].window = window;
+	layoutWindows[layoutWindowCount].title = title;
+	layoutWindows[layoutWindowCount].withSize = with_size;
+	layoutWindows[layoutWindowCount].bare = False;
+	++layoutWindowCount;
+}
+
+void
+	RPWindowLayout_Forget(void *window)
+{
+	for (int i = 0; i < layoutWindowCount; ++i)
+	{
+		if (layoutWindows[i].window == window)
+		{
+			layoutWindows[i] = layoutWindows[--layoutWindowCount];
+			layoutWindows[layoutWindowCount].window = NULL;
+			layoutWindows[layoutWindowCount].title = NULL;
+			return;
+		}
+	}
+}
+
+//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+// Sticky placement: restore the saved placement over the computed one.
+//
+// Called once everything has been built and placed, so a window the file
+// does not mention simply keeps where it was put. Size comes back only
+// for windows registered with it - see the header.
+//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+void
+	RPWindowLayout_Load()
+{
+	if (LayoutMode() == LayoutOff || layoutWindowCount == 0)
+	{
+		return;
+	}
+
+	FILE *file = fopen(layoutFileName, "rt");
+	if (file == NULL)
+	{
+		DEBUG_STREAM << "MFDLayout: no " << layoutFileName
+			<< " yet (using the computed arrangement)\n" << std::flush;
+		return;
+	}
+
+	int restored = 0;
+	char line[256];
+	while (fgets(line, sizeof(line), file) != NULL)
+	{
+		char *cursor = line;
+		while (*cursor == ' ' || *cursor == '\t')
+		{
+			++cursor;
+		}
+		if (*cursor == '#' || *cursor == '\r' || *cursor == '\n' || *cursor == '\0')
+		{
+			continue;
+		}
+
+		// titles carry no '=', so the first one splits the line
+		char *equals = strchr(cursor, '=');
+		if (equals == NULL)
+		{
+			continue;
+		}
+		*equals = '\0';
+		char *end = equals;
+		while (end > cursor && (end[-1] == ' ' || end[-1] == '\t'))
+		{
+			--end;
+		}
+		*end = '\0';
+
+		int x = 0, y = 0, w = 0, h = 0;
+		if (sscanf(equals + 1, "%d,%d,%d,%d", &x, &y, &w, &h) < 2)
+		{
+			continue;
+		}
+
+		//
+		// Optional trailing keyword, "x,y,w,h,noframe". Searched for
+		// rather than parsed in place so a hand-edited line survives a
+		// stray space or a missing comma.
+		//
+		Logical bare = (strstr(equals + 1, "noframe") != NULL) ? True : False;
+
+		for (int i = 0; i < layoutWindowCount; ++i)
+		{
+			LayoutWindow &entry = layoutWindows[i];
+			if (entry.title == NULL || strcmp(entry.title, cursor) != 0)
+			{
+				continue;
+			}
+			HWND target = (HWND) entry.window;
+			if (target == NULL || !IsWindow(target))
+			{
+				break;
+			}
+
+			// a saved size of nothing is a corrupt line, not an instruction
+			Logical size_it = (entry.withSize && w > 0 && h > 0) ? True : False;
+
+			//
+			// Saved coordinates belong to whatever monitors were plugged
+			// in that day. If the placement lands on none of today's, drop
+			// it and keep the computed one - restoring the game window
+			// somewhere invisible would leave nothing to drag back.
+			//
+			RECT landing;
+			landing.left = x;
+			landing.top = y;
+			if (size_it)
+			{
+				landing.right = x + w;
+				landing.bottom = y + h;
+			}
+			else
+			{
+				RECT current;
+				if (!GetWindowRect(target, &current))
+				{
+					break;
+				}
+				landing.right = x + (current.right - current.left);
+				landing.bottom = y + (current.bottom - current.top);
+			}
+			if (MonitorFromRect(&landing, MONITOR_DEFAULTTONULL) == NULL)
+			{
+				DEBUG_STREAM << "MFDLayout: " << cursor << " was saved at "
+					<< x << "," << y << " - off every monitor now, ignoring\n"
+					<< std::flush;
+				break;
+			}
+
+			//
+			// Frame off, if the line asked. A bare window's rect IS its
+			// client rect, so whatever client area it has now is the size
+			// to hand back - which also makes the round trip stable: once
+			// bare, what Save records is already the client.
+			//
+			entry.bare = bare;
+			if (bare)
+			{
+				if (!size_it)
+				{
+					RECT client;
+					if (GetClientRect(target, &client))
+					{
+						w = client.right;
+						h = client.bottom;
+						size_it = True;
+					}
+				}
+				StripWindowFrame(target);
+			}
+
+			SetWindowPos(target, NULL, x, y, w, h,
+				SWP_NOZORDER | SWP_NOACTIVATE |
+				(size_it ? 0 : SWP_NOSIZE) | (bare ? SWP_FRAMECHANGED : 0));
+			++restored;
+			break;
+		}
+	}
+	fclose(file);
+
+	DEBUG_STREAM << "MFDLayout: restored " << restored << " window placement(s) from "
+		<< layoutFileName << "\n" << std::flush;
+}
+
+//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+// Write where every registered window currently is. The whole file each
+// time - it is a handful of lines, and a rewrite leaves nothing
+// half-written for a hard kill to catch.
+//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+void
+	RPWindowLayout_Save()
+{
+	if (LayoutMode() != LayoutSave || layoutWindowCount == 0)
+	{
+		return;
+	}
+
+	FILE *file = fopen(layoutFileName, "wt");
+	if (file == NULL)
+	{
+		DEBUG_STREAM << "MFDLayout: could not write " << layoutFileName
+			<< "\n" << std::flush;
+		return;
+	}
+
+	fputs("# RP412 window placement. RP412MFDLAYOUT=save writes this on each\n"
+		  "# finished drag and on exit; =load restores it.\n"
+		  "# <title>=<x>,<y>,<w>,<h>. The game window gets its size back too;\n"
+		  "# for the display panes the size is reference only, since theirs\n"
+		  "# follows their content.\n"
+		  "# Append ,noframe to take that window's title bar and border off.\n"
+		  "# Put it where you want it first - a bare window has nothing to\n"
+		  "# drag by, so its line stops changing once the frame is gone.\n", file);
+
+	int wrote = 0;
+	for (int i = 0; i < layoutWindowCount; ++i)
+	{
+		LayoutWindow &entry = layoutWindows[i];
+		if (entry.title == NULL)
+		{
+			continue;
+		}
+		HWND entry_window = (HWND) entry.window;
+		if (entry_window == NULL || !IsWindow(entry_window))
+		{
+			continue;
+		}
+		//
+		// rcNormalPosition rather than GetWindowRect: a minimised window
+		// reports a nonsense rect and a maximised one reports the screen,
+		// and neither is what to come back to. This is the restored
+		// placement whatever state the window is in, so quitting from
+		// maximised still records where the window will reappear.
+		//
+		WINDOWPLACEMENT placement;
+		memset(&placement, 0, sizeof(placement));
+		placement.length = sizeof(placement);
+		if (!GetWindowPlacement(entry_window, &placement))
+		{
+			continue;
+		}
+		RECT bounds = placement.rcNormalPosition;
+		// the flag is the player's instruction, not something measured off
+		// the window, so a rewrite has to carry it back out
+		fprintf(file, "%s=%ld,%ld,%ld,%ld%s\n", entry.title,
+			(long) bounds.left, (long) bounds.top,
+			(long) (bounds.right - bounds.left),
+			(long) (bounds.bottom - bounds.top),
+			entry.bare ? ",noframe" : "");
+		++wrote;
+	}
+	fclose(file);
+
+	DEBUG_STREAM << "MFDLayout: saved " << wrote << " window placement(s) to "
+		<< layoutFileName << "\n" << std::flush;
+}
+
 //~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 // Compute the display rectangle and the button rectangles, growing the
 // client area to make room for the strips.

MUNGA_L4/L4MFDVIEW.h

@@ -77,6 +77,14 @@ public:
 	void
 		Hide();
 
+	// caption and HWND, for the sticky-placement file
+	const char *
+		Title() const
+			{ return paneTitle; }
+	void *
+		Window()
+			{ return window; }
+
 	~MFDSplitView();
 
 	Logical
@@ -147,4 +155,79 @@ protected:
 	int
 		buttonAnchorA,
 		buttonAnchorB;
+
+	// the window caption, and the key this pane is saved under
+	const char
+		*paneTitle;
+	// True for a pane of its own on the desktop (the exploded view); the
+	// composited cockpit's panes are chrome-less children and cannot be
+	// dragged, so there is nothing to remember for them.
+	Logical
+		ownWindow;
 };
+
+//########################################################################
+// Sticky window placement.
+//
+// The game window and, in the exploded view, each display pane are all
+// draggable, but their placement is recomputed on every launch - so
+// putting a window somewhere useful never survived the menu-race-menu
+// loop. RP412MFDLAYOUT remembers it, in mfd_layout.cfg beside
+// bindings.txt:
+//
+//   off / 0 / unset   computed placement only, no file (default)
+//   load / restore    restore saved placement at startup, never write
+//   save / adjust     restore, then rewrite on each finished drag and
+//                     on teardown - the round trip
+//
+// One "<title>=x,y,w,h" line per window, plus an optional ",noframe"
+// that takes that window's title bar and border off - for a cockpit that
+// fills a monitor edge to edge without -fit's all-or-nothing, or an
+// exploded pane photographed without chrome. A bare window has nothing
+// to drag by, so place it first and add the flag after; Save carries the
+// flag back out, since it is an instruction rather than something
+// measured off the window. Windows are always built framed, so deleting
+// the flag is all it takes to get the frame back.
+//
+// Whether the size comes back depends on the window, which is why
+// Register takes it as a flag:
+//
+//   display panes  position only. A pane's size follows its content and
+//                  its button banks, so an old size from a different
+//                  build must not distort it. The plasma glass registers
+//                  the same way - its size is L4PLASMASCALE's business.
+//   the game window  position and size. Nothing derives that size - -res
+//                  only decides how sharp the scene is, and the cockpit
+//                  fits itself to whatever client area it is given - so
+//                  a window sized to suit a monitor should come back
+//                  that way, and half-restoring it would be the strange
+//                  behaviour. RPL4.CPP registers it before the console
+//                  screen, so the saved placement is there from the
+//                  first frame rather than arriving when a race starts.
+//
+// A placement that lands on none of the monitors currently plugged in is
+// ignored rather than applied - restoring the game window off screen
+// would leave nothing to drag back.
+//
+// Lives here because the display panes were the first to need it; the
+// game window joined later rather than grow a second copy of the same
+// file format.
+//
+// Ported from BT411's BT_GLASS_LAYOUT.
+//########################################################################
+
+// Take part in the saved layout. title is the key in the file and must
+// outlive the window (the callers pass string literals).
+void
+	RPWindowLayout_Register(void *window, const char *title, Logical with_size);
+void
+	RPWindowLayout_Forget(void *window);
+
+// Apply the saved placement over the computed one. Call once everything
+// has been built and placed.
+void
+	RPWindowLayout_Load();
+
+// Write every registered window's placement. No-op unless mode is save.
+void
+	RPWindowLayout_Save();

MUNGA_L4/L4PLASMASCREEN.cpp

@@ -3,6 +3,7 @@
 
 #include "l4plasmascreen.h"
 #include "l4app.h"
+#include "l4mfdview.h"		// RPWindowLayout_*
 
 namespace
 {
@@ -45,6 +46,15 @@ namespace
 			}
 			break;
 
+		case WM_EXITSIZEMOVE:
+			//
+			// Dragged to a new spot. Write the whole arrangement now rather
+			// than trusting teardown, so a hard kill still leaves what was
+			// on screen. No-op unless RP412MFDLAYOUT is save.
+			//
+			RPWindowLayout_Save();
+			return 0;
+
 		case WM_CLOSE:
 			// The glass is part of the cockpit; just hide it.
 			ShowWindow(hwnd, SW_HIDE);
@@ -176,6 +186,7 @@ PlasmaScreen::~PlasmaScreen()
 	}
 	if (window != NULL)
 	{
+		RPWindowLayout_Forget(window);
 		RemovePropA((HWND) window, "PlasmaBitmapInfo");
 		RemovePropA((HWND) window, "PlasmaPixels");
 		DestroyWindow((HWND) window);
@@ -275,6 +286,22 @@ void
 		SetPropA((HWND) window, "PlasmaPixels", pixelBuffer->Data.MapPointer);
 		ShowWindow((HWND) window, SW_SHOWNOACTIVATE);
 		activeInstance = this;
+
+		//
+		//-----------------------------------------------------------
+		// Join the saved layout. Position only, like the display
+		// panes: the glass is 128x32 at L4PLASMASCALE, so its size
+		// is a setting rather than something to drag.
+		//
+		// Loading here rather than leaving it to SVGA16 keeps this
+		// independent of which is built first - the glass comes from
+		// the gauge renderer, the panes from the video mode, and
+		// whichever runs second re-applies a placement the first
+		// already has.
+		//-----------------------------------------------------------
+		//
+		RPWindowLayout_Register(window, "Plasma Display", False);
+		RPWindowLayout_Load();
 	}
 	else
 	{

MUNGA_L4/L4VB16.cpp

@@ -3839,6 +3839,11 @@ static LRESULT CALLBACK
 			cockpit->LayoutCockpit(LOWORD(lParam), HIWORD(lParam));
 		}
 	}
+	//
+	// WM_EXITSIZEMOVE is not handled here: RPL4.CPP's own WndProc takes
+	// it, and this chains straight through to that, so the shell saves on
+	// every finished drag whether or not a cockpit has been built.
+	//
 	return CallWindowProcA(gCockpitBaseProc, hwnd, message, wParam, lParam);
 }
 
@@ -4457,6 +4462,15 @@ SVGA16::SVGA16(
 		splitView[SplitMFDLowerRight]->SetPosition(
 			work.left + right_x, work.top + bottom_y);
 		splitView[SplitMap]->SetPosition(work.left + map_x, work.top + map_y);
+
+		//
+		// ...and then let RP412MFDLAYOUT put everything back where it was
+		// dragged to last time. Windows the file does not mention keep the
+		// arrangement just computed above. The game window is registered
+		// already - RPL4.CPP does that before the console screen ever
+		// shows - so this picks it up alongside the panes.
+		//
+		RPWindowLayout_Load();
 	}
 	else if (splitViews)
 	{
@@ -4668,6 +4682,23 @@ SVGA16::SVGA16(
 			// catch maximise / restore / drag-resize and re-fit
 			gCockpitBaseProc = (WNDPROC) SetWindowLongPtrA(
 				cockpit, GWLP_WNDPROC, (LONG_PTR) CockpitShellProc);
+
+			//
+			// Sticky placement for the shell. Position AND size: nothing
+			// derives that size here - -res only decides how sharp the
+			// scene is - so a window sized to suit a monitor should come
+			// back that way. RPL4.CPP registered it before the console
+			// screen; this reload undoes the sizing just done above, and
+			// runs after the subclass on purpose so its WM_SIZE puts
+			// LayoutCockpit over the restored client area.
+			//
+			// -fit sits it borderless over the whole monitor, so there is
+			// no placement of the player's to remember.
+			//
+			if (!fit_display)
+			{
+				RPWindowLayout_Load();
+			}
 		}
 		else
 		{
@@ -4863,6 +4894,14 @@ SVGA16::~SVGA16()
 	//---------------------------------------------------------
 	//SVGASetSplitterClock(False);
 
+	//
+	// Backstop for the sticky placement: every finished drag has already
+	// been written, but a window moved and then closed straight away would
+	// otherwise be missed. Must run before the panes go - it reads their
+	// live window rects, and the game window's.
+	//
+	RPWindowLayout_Save();
+
 	for (int view = 0; view < SplitViewCount; ++view)
 	{
 		delete splitView[view];

README.md

@@ -61,6 +61,20 @@ cockpit glass cleared away, held for a few seconds before the results screen.
 Three pieces of it had been stubbed out in the D3D9 port and are working
 again.
 
+[v4.12.6](https://gitea.mysticmachines.com/VWE/RP412/releases/tag/v4.12.6)
+is about the windows. Where you put them now survives the
+menu-race-menu loop: `RP412MFDLAYOUT` remembers the game window, the
+exploded view's display panes and the plasma glass in `mfd_layout.cfg`
+beside `bindings.txt`. Append `,noframe` to a line to take that
+window's title bar and border off — a cockpit filling the monitor edge
+to edge at a rect you chose, rather than `-fit` taking the whole
+screen — and the setup screen carries its own **EXIT GAME** button,
+since a window with no title bar needs a way out. The Steam buttons
+now dim and say *STEAM NOT RUNNING* instead of disappearing. And the
+Winners Circle camera is framed off the award stand itself rather than
+off whoever is standing on it, so the shot is the same one for every
+player at every head count.
+
 ## Playing
 
 Grab the release zip (or run `pack-dist.ps1` on a build). Single player:

RP_L4/RPL4.CPP

@@ -26,6 +26,7 @@
 #include "rpl4lobby.h"
 #include "..\munga_l4\l4steamtransport.h"
 #include "..\munga_l4\l4splr.h"
+#include "..\munga_l4\l4mfdview.h"		// RPWindowLayout_*
 #include "rpl4ver.h"
 #include "..\munga\resver.h"
 #include "..\munga\resource.h"
@@ -123,6 +124,15 @@ LRESULT CALLBACK WndProc(HWND hWnd, UINT uMsg, WPARAM wParam, LPARAM lParam)
 			return 0;
 		}
 		break;
+	case WM_EXITSIZEMOVE:
+		//
+		// A drag or resize just finished. Here rather than in the
+		// cockpit's subclass so it also covers the console screen, which
+		// is where the window gets moved before there is any cockpit to
+		// subclass. No-op unless RP412MFDLAYOUT is save.
+		//
+		RPWindowLayout_Save();
+		return 0;
 	}
 	return DefWindowProc(hWnd, uMsg, wParam, lParam);
 }
@@ -177,7 +187,7 @@ int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine
       fclose(file);
    }
 
-   DEBUG_STREAM << "Red Planet 4.12.5" << std::endl << std::flush;
+   DEBUG_STREAM << "Red Planet 4.12.6" << std::endl << std::flush;
    DEBUG_STREAM << "L4CONTROLS=" << getenv("L4CONTROLS") << std::endl << std::flush;
 
 #ifdef RP412_STEAM
@@ -254,6 +264,21 @@ int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine
       return FALSE;
 
 	ShowWindow(hWnd, nShowCmd);
+
+	//
+	// Sticky placement, from the first frame the player sees. SVGA16 also
+	// registers and reloads when it builds the cockpit, but that is not
+	// until a mission starts - without this the console screen would come
+	// up at the default rect with its title bar still on, and only jump
+	// to the saved placement once a race began. -fit takes the whole
+	// monitor and has no placement of the player's to restore.
+	//
+	if (!L4Application::GetFitDisplay() && !L4Application::GetFullscreen())
+	{
+		RPWindowLayout_Register(hWnd, "RPL4", True);
+		RPWindowLayout_Load();
+	}
+
 #if !_DEBUG
 	// Arcade pods have no mouse - but desktop/windowed play needs the
 	// cursor for the on-screen cockpit buttons, so hide it only when
@@ -475,6 +500,19 @@ int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPSTR lpCmdLine
 	}
   }
 
+	//
+	// Last word on the window's placement. Every finished drag has already
+	// written it and SVGA16 writes again as the cockpit comes down, but a
+	// session that never started a race has neither - and quitting from
+	// the console screen is exactly how somebody would leave after moving
+	// the window to where they want it. No-op unless the mode is save.
+	//
+	if (IsWindow(hWnd))
+	{
+		RPWindowLayout_Save();
+	}
+	RPWindowLayout_Forget(hWnd);
+
 #if !_DEBUG
 	// symmetric with the fullscreen-only hide at startup
 	if (L4Application::GetFullscreen())

RP_L4/RPL4APP.cpp

@@ -133,20 +133,27 @@ void
 	// meaningful in both.
 	//---------------------------------------------------------------------
 	//
+	//
+	//---------------------------------------------------------------------
+	// The stand's own geometry first, before anybody stands on it.
+	//
+	// The eight spots are fixed furniture on every map, so reading them up
+	// front gives one set of numbers to both jobs below: where to stand
+	// the finishers, and where to put the camera. Only the first is
+	// allowed to care who finished.
+	//---------------------------------------------------------------------
+	//
+	enum { winnersSpotCount = 8 };
+	DropZone *spot[winnersSpotCount];
+	int spots_found = 0;
+
 	char winners_spot[] = "win?";
 	char *place = winners_spot + 3;
-	int placed = 0;
-	Point3D standFront(0.0f, 0.0f, 0.0f);
-	Point3D standCentre(0.0f, 0.0f, 0.0f);
 
-	Player *p;
+	for (int i = 0; i < winnersSpotCount; ++i)
-	for (int rank = 0; (p = CameraDirector::FindPlayerByRank(rank)) != NULL; ++rank)
 	{
-		if (rank > 7)
+		*place = (char) ('1' + i);
-		{
+		spot[i] = NULL;
-			break;			// only eight spots exist on the stand
-		}
-		*place = (char) ('1' + rank);
 
 		ChainIteratorOf<Node*> iterator(dropzones->groupMembers);
 		DropZone *dropzone;
@@ -154,10 +161,36 @@ void
 		{
 			if (!strcmp(dropzone->GetDropZoneName(), winners_spot))
 			{
+				spot[i] = dropzone;
+				++spots_found;
+				Point3D at = dropzone->localOrigin.linearPosition;
+				DEBUG_STREAM << "WinnersCircle: " << winners_spot << " at "
+					<< at.x << "," << at.y << "," << at.z << "\n" << std::flush;
 				break;
 			}
 		}
-		if (dropzone == NULL)
+	}
+
+	if (spot[0] == NULL)
+	{
+		DEBUG_STREAM << "WinnersCircle: no win1 spot on this map\n" << std::flush;
+		return;
+	}
+
+	//
+	//---------------------------------------------------------------------
+	// Stand the finishers up, in finishing order.
+	//---------------------------------------------------------------------
+	//
+	int placed = 0;
+	Player *p;
+	for (int rank = 0; (p = CameraDirector::FindPlayerByRank(rank)) != NULL; ++rank)
+	{
+		if (rank >= winnersSpotCount)
+		{
+			break;			// only eight spots exist on the stand
+		}
+		if (spot[rank] == NULL)
 		{
 			continue;
 		}
@@ -168,20 +201,9 @@ void
 			continue;
 		}
 		VTV *vtv = (VTV*) vehicle;
-		vtv->Reset(dropzone->localOrigin, VTV::MissionReviewReset);
+		vtv->Reset(spot[rank]->localOrigin, VTV::MissionReviewReset);
 		vtv->SetPerformance(&VTV::DoNothing);
 		vtv->FlushEvents();
-
-		Point3D spot = dropzone->localOrigin.linearPosition;
-		if (placed == 0)
-		{
-			// remember where the front of the stand is - the shot is framed
-			// off it rather than off hardcoded map coordinates
-			standFront = spot;
-		}
-		standCentre += spot;
-		DEBUG_STREAM << "WinnersCircle: " << winners_spot << " at "
-			<< spot.x << "," << spot.y << "," << spot.z << "\n" << std::flush;
 		++placed;
 	}
 
@@ -239,25 +261,52 @@ void
 	// line-up frames up. The stand runs from z~3 (rank 1, low) to z~39
 	// (ranks 4-8, high) and x~1180..1219; at 45 degrees that needs roughly
 	// 30 units of standoff. Eye is above the top tier looking slightly
-	// down at the middle of the group.
+	// down at the winner's spot.
+	//
+	// Framed off the stand, NOT off who is standing on it. This used to
+	// average the filled spots and anchor on the first one filled, which
+	// meant the camera moved with the head count: eight finishers put the
+	// anchor in the middle of the tiers and the eye about 58 units out,
+	// one finisher collapsed it onto the winner's spot and brought the eye
+	// in to 36. Same stand, different shot per race - and per machine, if
+	// a remote player's vehicle was not there to be placed. The furniture
+	// does not move, so the camera does not either.
 	//---------------------------------------------------------------------
 	//
-	standCentre.x /= (Scalar) placed;
+	Point3D standFront = spot[0]->localOrigin.linearPosition;
-	standCentre.y /= (Scalar) placed;
-	standCentre.z /= (Scalar) placed;
 
 	//
-	// Stand off along the line from the middle of the group out through the
+	// The stand's own axis: back rows to the winner's spot, which points
-	// front spot, so the shot faces the stand however the map has it turned,
+	// out of the front however the map has the stand turned. Taken from
-	// and lift the eye above the top tier to look down on the line-up.
+	// the geometry rather than assumed, so a map that mounts its stand at
+	// another angle still gets photographed from the front.
 	//
+	Point3D standBack(0.0f, 0.0f, 0.0f);
+	int back_count = 0;
+	for (int i = 1; i < winnersSpotCount; ++i)
+	{
+		if (spot[i] != NULL)
+		{
+			standBack += spot[i]->localOrigin.linearPosition;
+			++back_count;
+		}
+	}
+	if (back_count > 0)
+	{
+		standBack.x /= (Scalar) back_count;
+		standBack.y /= (Scalar) back_count;
+		standBack.z /= (Scalar) back_count;
+	}
+
 	Vector3D facing;
-	facing.x = standFront.x - standCentre.x;
+	facing.x = standFront.x - standBack.x;
 	facing.y = 0.0f;
-	facing.z = standFront.z - standCentre.z;
+	facing.z = standFront.z - standBack.z;
 	Scalar reach = (Scalar) sqrt(facing.x * facing.x + facing.z * facing.z);
 	if (reach < 0.01f)
 	{
+		// a one-spot stand, or all eight stacked: nothing to take a
+		// direction from, so fall back to the way the shipped stands face
 		facing.x = 0.0f;  facing.z = -1.0f;  reach = 1.0f;
 	}
 	//
@@ -285,10 +334,12 @@ void
 	if (tune != NULL)						aim_lift = (Scalar) atof(tune);
 
 	Point3D eye;
-	eye.x = standCentre.x + (facing.x / reach) * standoff;
+	eye.x = standFront.x + (facing.x / reach) * standoff;
-	eye.y = standCentre.y + height;
+	eye.y = standFront.y + height;
-	eye.z = standCentre.z + (facing.z / reach) * standoff;
+	eye.z = standFront.z + (facing.z / reach) * standoff;
-	standCentre.y += aim_lift;
+
+	Point3D aim = standFront;
+	aim.y += aim_lift;
 
 	//
 	// RP412PODIUMCAM=0 leaves the view in the cockpit, which is also the
@@ -315,7 +366,7 @@ void
 	if (camera_mode == NULL || atoi(camera_mode) != 0)
 	{
 		dpl_renderer->SetViewAngle(Degree(45.0f));
-		dpl_renderer->SetPresentationCamera(eye, standCentre);
+		dpl_renderer->SetPresentationCamera(eye, aim);
 	}
 	else
 	{
@@ -340,8 +391,13 @@ void
 	}
 	dpl_renderer->StartPresentationFadeIn(fade_in);
 
-	DEBUG_STREAM << "WinnersCircle: " << placed << " placed; centre "
+	//
-		<< standCentre.x << "," << standCentre.y << "," << standCentre.z
+	// placed is reported for diagnosis only - the camera numbers beside it
+	// must not move when it does.
+	//
+	DEBUG_STREAM << "WinnersCircle: " << placed << " placed on "
+		<< spots_found << " spots; aim "
+		<< aim.x << "," << aim.y << "," << aim.z
 		<< " eye " << eye.x << "," << eye.y << "," << eye.z
 		<< "\n" << std::flush;
 }

RP_L4/RPL4FE.cpp

@@ -177,6 +177,7 @@ namespace
 		GroupLaunch,
 		GroupSteamHost,		// buttons, not selections (Steam builds only)
 		GroupSteamJoin,
+		GroupExit,
 		GroupCount
 	};
 
@@ -413,8 +414,9 @@ namespace
 		launch->rect.right = col3 + col_w;
 		launch->rect.bottom = client_h - row_h;
 
-		// Steam lobby buttons (only when the Steam wire is live)
+		// Steam lobby buttons, offered whenever environ.ini asked for Steam.
-		if (RPL4Lobby_Available())
+		// Painting greys them out and says so if the wire never came up.
+		if (RPL4Lobby_Configured())
 		{
 			FEItem *host = &fe->items[fe->itemCount++];
 			host->group = GroupSteamHost;
@@ -433,6 +435,23 @@ namespace
 			join->rect.bottom = client_h - (7 * row_h) / 2;
 		}
 
+		//
+		// Exit, bottom left. Diagonally opposite LAUNCH on purpose: it is
+		// the one button on this screen you cannot undo, so it does not go
+		// next to the one people are aiming for. Half width for the same
+		// reason - it is a way out, not a peer of LAUNCH.
+		//
+		// The window frame used to be the way out, and mfd_layout.cfg's
+		// ,noframe takes it away, so the screen has to offer its own.
+		//
+		FEItem *quit = &fe->items[fe->itemCount++];
+		quit->group = GroupExit;
+		quit->index = 0;
+		quit->rect.left = col1;
+		quit->rect.top = client_h - 2 * row_h;
+		quit->rect.right = col1 + col_w / 2;
+		quit->rect.bottom = client_h - row_h;
+
 		// pilot name edit sits at the top of column 3
 		if (fe->nameEdit != NULL)
 		{
@@ -484,6 +503,7 @@ namespace
 		case GroupLaunch:	return "L A U N C H   G A M E";
 		case GroupSteamHost:	return "HOST STEAM GAME";
 		case GroupSteamJoin:	return "JOIN STEAM GAME";
+		case GroupExit:		return "EXIT GAME";
 		}
 		return "";
 	}
@@ -544,12 +564,38 @@ namespace
 			RECT row = item->rect;
 			if (item->group >= GroupLaunch)
 			{
-				HBRUSH launch_brush = CreateSolidBrush(kGreenBright);
+				//
+				// The lobby buttons are offered whenever environ.ini asked
+				// for Steam, but they only work once the client is actually
+				// there. Dim them and say why rather than leaving them out -
+				// two buttons quietly missing looks like a broken build.
+				//
+				Logical steam_button =
+					(item->group == GroupSteamHost || item->group == GroupSteamJoin);
+				Logical dead = steam_button && !RPL4Lobby_Available();
+
+				COLORREF ink = dead ? kGreenDim : kGreenBright;
+				HBRUSH launch_brush = CreateSolidBrush(ink);
 				FrameRect(mem, &row, launch_brush);
 				DeleteObject(launch_brush);
-				SetTextColor(mem, kGreenBright);
+				SetTextColor(mem, ink);
 				DrawTextA(mem, ItemName(item->group, item->index), -1, &row,
 					DT_CENTER | DT_VCENTER | DT_SINGLELINE);
+
+				//
+				// The reason, on its own line above the pair. It does not
+				// fit inside a button - they are about sixteen characters
+				// wide and this is more than twice that.
+				//
+				if (dead && item->group == GroupSteamHost)
+				{
+					RECT notice = row;
+					notice.bottom = row.top;
+					notice.top = row.top - (row.bottom - row.top);
+					SetTextColor(mem, kGreenDim);
+					DrawTextA(mem, "STEAM NOT RUNNING", -1, &notice,
+						DT_CENTER | DT_VCENTER | DT_SINGLELINE);
+				}
 				continue;
 			}
 
@@ -612,10 +658,20 @@ namespace
 					PostMessageA(fe->menuWindow, WM_NULL, 0, 0);
 				}
 				else if (item->group == GroupSteamHost || item->group == GroupSteamJoin)
+				{
+					// dead until the Steam client is there; the button says so
+					if (RPL4Lobby_Available())
 					{
 						fe->steamAction = (item->group == GroupSteamHost) ? 1 : 2;
 						PostMessageA(fe->menuWindow, WM_NULL, 0, 0);
 					}
+				}
+				else if (item->group == GroupExit)
+				{
+					// the same door closing the window goes through
+					fe->closed = True;
+					PostMessageA(fe->menuWindow, WM_NULL, 0, 0);
+				}
 				else
 				{
 					fe->selection[item->group] = item->index;

RP_L4/RPL4LOBBY.cpp

@@ -11,6 +11,7 @@
 //########################################################################
 
 Logical RPL4Lobby_Available()						{ return False; }
+Logical RPL4Lobby_Configured()						{ return False; }
 Logical RPL4Lobby_InRoom()							{ return False; }
 int RPL4Lobby_Host(HINSTANCE, HWND)					{ return LobbyRoomLeft; }
 int RPL4Lobby_Join(HINSTANCE, HWND)					{ return LobbyRoomLeft; }
@@ -919,6 +920,18 @@ Logical
 	return SteamNetTransport_GetFakeAddressString()[0] != '\0';
 }
 
+//
+// The environ.ini switch, read the same way RPL4.CPP reads it to decide
+// whether to install the transport at all. Says nothing about whether the
+// Steam client was actually there.
+//
+Logical
+	RPL4Lobby_Configured()
+{
+	const char *steam_switch = getenv("RP412STEAM");
+	return (steam_switch != NULL && atoi(steam_switch) != 0) ? True : False;
+}
+
 Logical
 	RPL4Lobby_InRoom()
 {

RP_L4/RPL4LOBBY.h

@@ -33,6 +33,15 @@ enum RPL4LobbyOutcome
 Logical
 	RPL4Lobby_Available();
 
+// True when this build has Steam and environ.ini asked for it, whether
+// or not it actually came up. The menu offers the lobby buttons on this
+// and greys them out on Available() - a player who turned Steam on and
+// then launched without the client running should be told so, not left
+// looking at a menu that quietly has two fewer buttons than the last
+// time they saw it.
+Logical
+	RPL4Lobby_Configured();
+
 // True while we sit in a lobby (races return to the room).
 Logical
 	RPL4Lobby_InRoom();

docs/rp412-controls.html

@@ -1,4 +1,4 @@
-<title>Red Planet 4.12.3 — Controls</title>
+<title>Red Planet 4.12.6 — Controls</title>
 
 <style>
   :root {
@@ -754,7 +754,7 @@
 <div class="wrap">
 
   <header class="masthead">
-    <p class="eyebrow">Virtual World Entertainment · Tesla pod · RP 4.12.3</p>
+    <p class="eyebrow">Virtual World Entertainment · Tesla pod · RP 4.12.6</p>
     <h1>Red Planet<br>Controls Map</h1>
     <p class="lede">
       Every input the pod answers to, on the gamepad and the keyboard. The
@@ -1197,7 +1197,7 @@
   </section>
 
   <footer>
-    <span>Red Planet 4.12.3</span>
+    <span>Red Planet 4.12.6</span>
     <span>gitea.mysticmachines.com/VWE/RP412</span>
     <span>docs/CONTROLS.md · CONTROLS.txt ships with the game</span>
     <span>RGB keyboards mirror the pod lamps · RP412KEYLIGHT=0 to disable</span>

pack-dist.ps1

@@ -166,6 +166,28 @@ L4PLASMA=SCREEN
 # 480x640 - decoded exactly as the pod's VDB split them, no downscale).
 L4MFDSPLIT=1
 
+# The game window - and in the exploded view (L4MFDSPLIT=2) each display
+# window - is placed fresh every launch, so moving one somewhere useful
+# never survived the menu-race-menu loop. This remembers where you put
+# them, in mfd_layout.cfg beside this file:
+#   off / 0 / unset   computed placement only, no file (default)
+#   load              put the windows back where they were saved
+#   save              the same, and re-save on every finished drag
+# The game window gets its size back too, so you can size the cockpit to
+# suit your monitor once and keep it. The display windows get position
+# only: their size follows their content and their button banks, so an
+# old one is never restored over them. Arrange everything once with
+# save, then leave it on load.
+#
+# The plasma display window takes part too, under "Plasma Display".
+#
+# Each line in mfd_layout.cfg reads <title>=<x>,<y>,<w>,<h>, and you can
+# append ,noframe to take that window's title bar and border off - a
+# cockpit that fills the monitor edge to edge without -fit taking the
+# whole screen. Put the window where you want it first: a bare window
+# has nothing to drag by. Delete the flag to get the frame back.
+#RP412MFDLAYOUT=off
+
 # Size of the six secondary displays in the glass cockpit, as a
 # percentage of their pod size. The pod bolted them down at one size;
 # on a big panel there is room to trade viewscreen for instrument, so
@@ -357,7 +379,7 @@ start rpl4opt.exe -fit
 "@
 
 Set-Content -Path "$dist\README.txt" -Encoding ascii -Value @"
-Red Planet 4.12.5
+Red Planet 4.12.6
 =================
 
 Run start-fullscreen.bat for borderless over the whole monitor, or
@@ -422,7 +444,7 @@ $size = (Get-ChildItem $dist -Recurse | Measure-Object Length -Sum).Sum
 Write-Host ("dist ready: {0:N1} MB" -f ($size / 1MB))
 
 if ($Zip) {
-    $zipPath = Join-Path $root 'RedPlanet-4.12.5.zip'
+    $zipPath = Join-Path $root 'RedPlanet-4.12.6.zip'
     Write-Host "zipping to $zipPath..."
 
     # Everything lives under a single RP412\ folder inside the zip, so