Mech::DamageZone::TakeDamage is the full binary cascade (@0049c690): LOD
artifact router with same-attacker clustering (@0049c40c, hysteresis 0.33),
artifact parent level = mean of children, Energy-hit generator shorts
through the crit plug binding (novice-exempt), weighted CriticalHit
(@0049ccc4), zone-death allotment push (SendSubsystemDamage @0049c9a8) and
the segment-table destruction descent (RecurseSegmentTable @0049cad4 --
SIBS + DESCEND via the engine EntitySegment iterators).
Supporting bricks: Mech's OWN handler table with the TakeDamage override
(latches lastInflictingID @0x43c; gyro feed staged; cylinder table
deferred); friend class Mech__DamageZone (authentic); subsystem private
zones ARMED (structureReference + armorByFacing[5] normalized -- crits are
measurable); ApplyDamageAndMeasure; ForceCriticalFailure sets
DestroyedState so the weapon FSMs' GetSimulationState()==1 hard gate went
live; Generator::ForceShort + PoweredSubsystem::ForceShortRecovery.
Fight-verified (mutual BT_SPAWN_ENEMY + BT_FORCE_ZONE=8 concentrated fire):
arm zone to 1.0 -> sibling searchlight zone dies (Searchlight2/ThermalSight
crits destroyed, HUD degrading) -> DESCEND kills the gun zone -> PPC_2 +
ERMLaser_2 + Condenser6 DESTROYED and FALL SILENT (0 shots after death;
undamaged PPC_1 keeps firing); vital-zone hit = MECH KILL; PPC hit shorted
GeneratorD. This art has zero artifact zones (redirect=0 across all 20 --
router verified dormant-correct). Smoke + novice regressions clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The emitter charge cycle is now the authentic electrical model end to end.
- WIRE-VERIFIED resource fix: the Emitter block is graphicLength /
dischargeTime / seekVoltage[5] (FRACTIONS of the generator's rated voltage,
-1 sentinel) / seekVoltageRecommendedIndex. The old two-field guess read
seekVoltage[3]=0.99 as "dischargeTime 0.99s" -- the true PPC discharge is
0.2s, and the calibration reads seekV={6000,7000,8000,9900} x rated 10000,
recommended gear 2: the documented curve exactly.
- Ctor calibration (@004bb120): energyTotal=(dmg+heat)x1e7; EC pins
E=0.5V^2EC to energyTotal at the recommended gear; voltageScale calibrates
the exponential charge to reach seekV[rec] in the authored RechargeRate
seconds cold; damageFraction = the damage share.
- TrackSeekVoltage (@004ba838) + ChargeTimeScale (@004b0d50): the charge
integrates from the generator through the heat-stretched time scale, and
the I2R loss heats the GENERATOR -- verified GeneratorA at 477.9K charging
its PPC (BT411 predicted ~+480K) while the avionics generator idles at 77.
Hot generators charge slower: the heat/firepower feedback loop is CLOSED.
- Emitter::ComputeOutputVoltage override (now virtual, as in the binary
vtable): dial = level/seekV[gear], 0.01 snap, over-1 clamp.
- Sub-stepped Loading (1/60s slices -- the BT411 weapon-brick fix) + the
documented-divergence overcharge rescue. VERIFIED: the PPC loads at level
~7920, inside the binary's exact [7920,8080] snap window.
- FireWeapon energy algebra (@004bace8): damage/heat = energy shares x
chargeRatio^2. VERIFIED dmg=11.78 / heat=1.079e8 at ratio 0.9906. The
heatCost x 1e7 partial is retired -- heat now comes from the energy.
Zero Fail; jams/shutdowns regressions stay live under spam.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Weapons dump firing heat into their own sinks, sinks conduct through the
Condenser bank into the central HeatSink, temperatures drive the degradation/
failure alarms, and every powered subsystem tracks its generator through the
electrical state machine. Verified: the authentic fire-discipline game -- a PPC
spikes 77->709K per shot, relaxes to 441K across its 5s reload, and sustained
fire climbs 441->674->838->960K, brushing the authored 1000K degradation
threshold. All calibration values match the BT411 audit exactly (central bank
1.39e6, PPC sink 174000, thresholds 77/1000/2000).
- HEAT: HeatSinkSimulation (@004ad924 absorb->T->load->conduct->alarm),
ConductHeat/ComputeHeatFlow (@004ad8ac/@004ad9ec two-body equilibrium
relaxation; flow==0 exactly at uniform T), UpdateHeatLoad (15-sample filter);
heat-state enum + accessors; installed by the HeatSink ctor.
- WIRE-VERIFIED: HeatSink resource gains linkedSinkIndex -- THE missing
ancestry int that shifted every descendant block +1 (voltageSourceIndex had
been reading the linked-sink index: "power sources" appeared to be
Condensers). Conduction topology wired from it at construction:
weapons->Condensers1-6->central; Generators->Condensers; Reservoir->central.
- MECHWEAP resource: authentic pip tail (pipPosition int + pipColor 3 floats +
pipExtendedRange int) per the BT411 verified overlay; with linkedSinkIndex
this closes the whole +3 alignment mystery (ProjectileWeapon pad deleted).
True bhk1 reads: PPC recharge 5.0s (not 1.0), discharge 0.99s, range 900.
- POWERSUB: ctor resolves voltageSourceIndex -> GeneratorA-D (wire-verified),
taps via Generator::TapVoltageSource (-1 when full); PoweredSubsystemSimulation
(@004b0bd0) electrical FSM (Starting/NoVoltage/Shorted/GeneratorOff/Ready);
GeneratorSimulation partial (start/short-recovery timers).
- Weapons: power step at sim head; Loading recharge gated on electrical Ready
(authentic @4bbdf5); FireWeapon dumps firing heat. HEAT UNITS: the chain is
1e7-native with TWO authoring conventions -- energy weapons store small
(PPC=11, x1e7 from the energy algebra), ballistics store native (SRM6=5.06e7,
dumped raw; double-scaling it was the bring-up runaway-temperature bug).
- SENSOR: authentic gating (@004b1c4c) -- power step, electrical-Ready gate,
heat-state switch (Degradation x0.5 / Failure 0). Verified Ready + 100%.
Deferred: coolant depletion/venting, the novice HeatModelOff gate, the charge
model (TrackSeekVoltage/voltage sag/I2R), weapon gate 1 + jam roll, the central
sink's forward-linked drain. Zero Fail across fire + neutral runs.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Base of the Torso/HUD/Gyroscope cockpit subsystems. Ctor chains HeatWatcher +
watchdogAlarm(5) + minVoltage; statics/dtor/test/reset real; Simulation staged.
BT: 27 ok.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Generator : public HeatSink (classID 0xBC3) -- the voltage SOURCE that
PoweredSubsystems tap (currentTapCount = attached loads). Reconstructed from the
BT411 decomp + the surviving GNRATOR.TCP partial: ctor chains HeatSink, seeds
ratedVoltage/outputVoltage/maxTapCount/startTime/shortRecoveryTime + stateAlarm(5)
= AlarmIndicator, derives generatorNumber from the segment-name suffix. Statics,
dtor, TestClass/TestInstance/ResetToInitialState real (ResetToInitialState mirrors
the .TCP); GeneratorSimulation (per-frame voltage/short) staged. Master-instance
SetPerformance install deferred (per-frame sim staged anyway).
Power system pair now in place: Generator (source) + PoweredSubsystem (load).
Roster classes so far: MechSubsystem, HeatableSubsystem, HeatSink,
PoweredSubsystem, Sensor, Generator. BT: 27 ok; tree links clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Fixes the staged POWERSUB.HPP base (HeatableSubsystem -> HeatSink, the real
hierarchy) and reconstructs PoweredSubsystem: a HeatSink that draws electrical
power. Added members (voltageSource = SubsystemConnection, electricalStateAlarm =
AlarmIndicator(5), modeAlarm = AlarmIndicator(3), input/output/ratedVoltage) and
corrected the resource struct (voltageSourceIndex + thermalResistivityCoefficient
+ startTime). Ctor chains HeatSink and primes the electrical state; statics, dtor,
ResetToInitialState, TestClass/TestInstance real.
The voltage-source resolution (indexing the owner mech's subsystem ROSTER for the
powering generator) + master-instance electrical sim + AttachToVoltageSource are
deferred to the segment-walk phase (phase 4) where the roster is populated -- the
subsystem constructs with no attached source until then. Verified slice now:
MechSubsystem -> HeatableSubsystem -> HeatSink -> PoweredSubsystem. Compile-verified
(BT: 26 ok); tree links clean.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
CydandClaude Fable 5