6bb03aed0bc4e0ba6cd6026d9224c074be897ff7
41
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 arcattackandClaude Fable 5
|
6bb03aed0b |
Gitea #48 ROOT-CAUSED + FIXED: MFD "stray blocks / misplaced lamps" = uninitialized translation-table entries leaking pixels into other displays' bit-planes
The conviction was empirical, not theoretical: a new write-site trap
(BT_PLANE_AUDIT) in the seven L4VB16 drawing primitives logs any draw whose
color carries bits outside its port's plane mask -- the exact cross-display
corruption condition (Replace ORs an unmasked color; Or/Xor ignore the mask
entirely; And clears foreign planes). A quiet solo session produced 15-30
leaks per minute:
[plane] PORT 'sec' pixmap draw at(0,0) idx 217 entry=0xffffff00 mask=0x3f
[plane] LEAK DrawPixelMap8[table] at(639,0) color=0xffffff00 mask=0x3f leak=0xff00
THE DEFECT: L4GraphicsPort::translationTable[256] is never initialized in the
ctor, and BuildSecondaryTranslation fills only the entries its BitWrangler
reaches -- 2^numberOfBits: 64 for the sec plane (mask 0x3F), 4 for the overlay
(0xC0). Entries above that stay heap garbage. Every draw resolves color
through this table, and the PIXMAP path indexes it with raw pixel values
0..255: the 480x640 radar background carries pixel index 217, whose garbage
entry's high bits (0xFF00 = ALL EIGHT MFD planes) were stamped into the shared
640x480 buffer -- invisible on the culprit page (the in-plane bits happened
dark) and visible as bright fragments at the same coordinates on every OTHER
display. That is the operator's screenshot exactly: the same-position blips
on Mfd1+Mfd2 and the Heat-display block.
FIX (engine, both layers):
* zero translationTable in the L4GraphicsPort ctor (plane-neutral default);
* BuildSecondaryTranslation now cycles the in-plane pattern across entries
[2^bits..255] -- high-index art degrades to its (index mod 2^bits) colour
IN-PLANE and can never leak. The 1995 binary ships the SAME 64-entry fill
and survived on 6-bit art discipline; garbage is not a preservable
behaviour, so the cycle-fill is a guarded PORT deviation (documented).
A/B PROOF: same probe, 60s -- 0 leaks after the fix (15-30/min before).
sim3 3-pod regression: zero crashes.
SECOND real defect found + fixed en route: sessions configure the CAMERA seat
first ("cameraInit" -- which includes the MISSION-REVIEW context:
configure(0, sec, 0, 0x00FF, native, rgb, mrpal.pcc), a DirectColor context
whose translation tables legitimately hold full RGB565 values spanning all 16
plane bits), and the viewpoint swap to the mech re-configured WITHOUT tearing
that tree down (btl4app's s_gaugeTreeBuilt latch treats the mech build as the
first). The orphaned review gauges kept executing through stale DirectColor
ports. BTL4GaugeRenderer::ConfigureForModel now overrides (ConfigureForModel
made virtual in L4GREND.h) and tears the prior entity-bound tree down before
every rebuild -- safe on first build, and the review screen rebuilds the same
way when the seat returns to the camera.
Also logged (open-questions): the review-screen PlayerStatus panels read the
compiled player at RAW BINARY OFFSETS (+0x1FC vehicle / +0x1C8 score /
+0x1C4 alive-dead box) -- the databinding trap, dormant until the review
screen runs; bridge before enabling the review.
Ruled out along the way (with evidence): the pilot-list label/erase geometry
(erase box 128x32 covers the 64x16 name rasters), the radar name labels
(view-level ClipImage clips them), PlayerStatus in-game execution ([ps] probe:
never runs in-game), and the PNAME bitmap dimensions (egg generator emits
64x16 exactly).
Why it "started with the comms feature" (#43): that wave registered the new
gauge classes with the config interpreter, letting more of the authored page
furniture parse and draw than before -- the leaking high-index pixmaps rode in
with it. [T3 correlation detail; the leak + fix are T2 live-verified.]
Diagnostics kept (env-gated): BT_PLANE_AUDIT (the leak trap, now a permanent
regression tripwire), BT_PS_LOG, the port-level pixmap identity trap.
KB: gauges-hud.md (#48 section), decomp-reference.md (BT_PLANE_AUDIT),
open-questions.md (PlayerStatus databinding entry). checkctx CLEAN.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
6f5a264835 |
Gitea #47 COMPLETE: the ENG-button attention FLASH is live (jam / bay fire) -- MechTech status scan + BTL4GaugeAlarmManager + lamp chain, all from the binary
The pod behaviour Cyd described -- "on a jam or bay fire the display eng button
for the system flashes" -- is authored data + a five-stage chain, now running:
MechTech::TechnicalAssistance (@004ad33c, per frame)
edge-scans every monitored subsystem's GetStatusFlags() 7-bit condition
mask (TechStatusType: Destroyed 0, Damaged 1, CoolantLeaking 2,
Overheating 3, AmmoBurning 4, Jammed 5, BadPower 6)
-> Start/StopEntityAlarmMessage (@00436688 id 7 size 0x20 / @004366b8 id 8
size 0x1C; broadcast @004364e4; port shape: direct
Start/StopEntityAlarmImplementation calls on the gauge renderer)
-> GaugeAlarmManager::Activate(alarmModel) -- alarmModel = MechTech+0x100 =
the 'mechalrm' ModelList (id 83) -> SearchList(83, type 31) -> the baked
GaugeAlarmStream (id 331, 11 items {condition, lampCode}), decoded:
Destroyed -> gotoEngineering + engCooling + engBusMode
CoolantLeaking -> gotoEngineering + engCooling
AmmoBurning -> gotoEngineering + engEject
Jammed -> gotoEngineering + engEject
BadPower -> gotoEngineering + engBusMode
-> BTL4GaugeAlarmManager::ReadGaugeAlarmStreamItem -- THE REAL BODY, from
@004cc2fc + helpers @004cc108/148/1a0/264/27c + tables @0051cf1c..0x51d084
(gotoEngineering 0x80 = the subsystem's QUAD-SELECT bezel button via
lamp[aux]/mode[aux] tables; 0x81+ descend the eng-page bank; Condenser /
Generator specials on CoolantLeaking; <0x80 = the heat-bank fixed map).
btl4galm.cpp's old bodies were admitted fabrications and its provenance
note ("no override body exists in the image") was wrong -- corrected.
-> LampManager::FindLamp (@00444c80) -> Lamp::SetAlertState (@00444e64, a
COUNTER so stacked alarms hold the flash) -> L4Lamp::NotifyOfStateChange
emits RIO flashFast states 0x37/0x13 (== T0 L4LAMP.cpp:234-239) -> the
pod's physical lamps AND the glass panels (PadRIO IS rioPointer there).
FOUR load-bearing defects found and fixed en route -- each independently fatal
to the feature:
1. HeatableSubsystem's Derivation chained Subsystem directly, SKIPPING
MechSubsystem (written before the WAVE-1 re-basing) -- so EVERY subsystem
on both family branches failed IsDerivedFrom(MechSubsystem), which is
exactly MechTech's monitor filter: the status scan watched NOTHING.
2. MechSubsystem::GetStatusFlags was non-virtual (binary: vtable slot 12) --
the scan's MechSubsystem* call bound statically to the base tier and the
weapon bits could never surface.
3. ProjectileWeapon::GetStatusFlags sat in a Ghidra export gap -- raw-disasm
@004bbf88: base | 0x20 (weaponAlarm==5 Jammed) | 0x10 (linked bin
cookOffArmed@0x18C AmmoBurning). The port had "defer to base".
4. Mech::Reset's respawn sweep blanket-cast every roster entry to
MechSubsystem and called RespawnRepair -- wrong for the Subsystem-level
entries (MechTech 0xBDC, SubsystemMessageManager 0xBD3). On MechTech the
recon damageZone slot lands on its subsystemMonitors chain head: NULL
while the scan was broken (fix #1's bug MASKED this one), but the moment
the monitors populated, RespawnRepair virtual-called through a
SubsystemMonitor as if it were a DamageZone -> load-time crash in
StateIndicator::SetState (caught with cdb; call [edx+14h] on code bytes).
The sweep now filters IsDerivedFrom(MechSubsystem) before the cast.
Also: GUID identities pinned -- 0x50f4bc = PoweredSubsystem::ClassDerivations
(via @004b1208 = its TestInstance; btl4gau2's two "Generator" comments were
wrong, swept), 0x50fb60 = Generator's. A shadow-field instance documented for
the deferred de-shadow: MechSubsystem::damageZone re-declares the PUBLIC engine
Subsystem::damageZone (SUBSYSTM.h:159) -- mechtech's naive `sub->damageZone`
read the never-written engine member (0 monitors again); now reads the recon
member via GetDamageZoneProxy(). Logged in open-questions.
Wiring: BTL4GaugeRenderer now constructs + assigns the BTL4GaugeAlarmManager
(the base ctor NULLs it and Activate Check()s it); MechTech's Report*/
StatusMessageSink stubs are real; alarmModel confirmed baked (= 83) at runtime.
VERIFIED LIVE (scratchpad/lampflash.py, BT_LAMP_LOG chain trace):
[techstat] MechTech id 32 monitors 29 subsystems, alarmModel 83
[techstat] LRM15_1 condition 4 SET (alarmModel 83) <- bay fire armed
[galarm] condition 4 code 0x80 -> lamp 0xd mode 0x1 FLASH
[lamp] 0xd <- 0x37 (FLASHING) <- the select button
[galarm] condition 4 code 0x85 -> lamp 0xb mode 0x4 FLASH <- engEject
[techstat] LRM15_1 condition 4 CLEARED <- detonation clears
[techstat] AmmoBinLRM15_1 condition 0 SET <- bin Destroyed
Regressions: baytest PASS (bay fire kills), baypurge PASS (purge extinguishes),
sim3 3-pod brawl PASS with ZERO crashes (6 kills, organic heat-route bay fires,
respawns clean through the new sweep filter).
Env: BT_LAMP_LOG ([techstat]/[galarm]/[lamp]). KB: gauges-hud (the flash
section), decomp-reference (the GaugeAlarm closure + tables + GUIDs),
open-questions (built-note + the de-shadow deferred item), btl4gau2 comment
sweep. checkctx CLEAN.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
5ae4410914 |
Gitea #46: ammo bay fire now DETONATES and KILLS (+ #47 fire icon) -- three stacked kill-switches removed, the fuse decoded, and a vptr-alias corruption caught by regression
Field report (night 3): "two ammo bay fires and no death" (Cyd + RajelAran; one
purged, one left burning). Root cause = THREE independent kill-switches stacked
on the same path, all in ammobin.cpp:
1. `GameClock::Now() { return 0; }` -- `cookOffTime < Now()` was `0 < 0`, so
an ARMED bay fire never detonated.
2. `InjectHeat(void*) {}` -- the detonation body was a no-op.
3. The bin's Damage record was never stamped -- 0 damage of type 0 (which the
mech TakeDamage handler drops) even if 1+2 had fired.
THE FUSE (raw disasm, scratchpad/disammo.py): the old "RandomDelay" was a Ghidra
carve artifact -- FUN_004dcd94 is __ftol and the export DROPPED the caller's x87
expression. The real bytes @004bd450: fld 10.0 / fmul [ticksPerSecond] /
fadd 0.5 / __ftol -- a FIXED 10.0-SECOND fuse in clock ticks. New gotcha #19
(reconstruction-gotchas.md) documents the __ftol export blind spot.
THE DAMAGE RECORD: bin+0x1F0..0x21C is a real engine `Damage` (FUN_0041db7c IS
Damage::Damage(), byte-matched to T0 DAMAGE.cpp). The linked ProjectileWeapon's
ctor @004bc3fc stamps it from weapon->damageData @0x3A8 via
owner->roster[0x128][res+0x1C0] -- projweap.cpp's old comment called this "the
bin's HUD display block ... wired in the AmmoBin family"; both halves were wrong
and it was wired nowhere. Now stamped (before MissileLauncher's ctor divides by
missileCount -- a missile bin authentically holds the per-SALVO amount).
THE DETONATION (@004ac274 = MechSubsystem::DistributeCriticalHit -- the old
"HeatableSubsystem::InjectHeat" label was wrong, and the old reconstruction
iterated a stand-in CriticalChain whose First()/Next() returned 0):
statusAlarm pulse Exploding(2)->Destroyed(1) (slot 13 = the printSimulationState
state PRINT @004ac8c0, not an "explosion notify"), own private zone pinned
destroyed, then collect the mech DamageZones whose crit entries plug the bin
(the binary filters plug classID 0x4E = DamageZoneClassID -- VDATA.h idx 78,
cross-checked via idx 28 = AudioStateTrigger), split the amount evenly, and send
the OWNER one full Entity::TakeDamageMessage per zone: inflictingEntity = SELF,
damageZone = the zone index, inflictingSubsystemID = the bin (the message-
manager explosion-bundling key, ENTITY3.h's own NOTE), printing the binary's
exact "ammo explosion damaging <zoneName>" @0050df61.
Port shape: Mech::AmmoExplosionFanOut (mechdmg.cpp) behind a databinding bridge;
guarded deviation: zoneCount==0 warns instead of the binary's unguarded divide.
CriticalChain/CriticalEntry stand-ins DELETED from mechrecon.hpp.
VERIFIED LIVE (BT_BAYTEST hook = message 1, the crit-induced arm channel):
scratchpad/baytest.py : arm -> 10s -> "20 rounds x 35 = 700 (type 2)" ->
"ammo explosion damaging dz_ltorso" -> zone cascade -> mech DESTROYED
(authentic death list).
scratchpad/baypurge.py: arm -> eject-hold purge -> "bay fire EXTINGUISHED
(bin empty)", no detonation.
scratchpad/sim3.py : the HEAT route arms organically in combat (overheated
AFC100), detonates "11 x 25 = 275 (type 1)" split across dz_larm + dz_lgun.
BAYBOOM matchlog record added for MP field forensics.
FIX-OF-THE-FIX (caught by the sim3 regression, would have shipped a crash):
MechSubsystem's ReconDamageZone proxy puts structureLevel at OFFSET 0 -- which
ALIASES THE REAL DamageZone's VTABLE POINTER (the private zone is `new
DamageZone`, mechsub.cpp:154; mechsub.hpp:260 documents the alias). My first
DistributeCriticalHit kept the old body's `damageZone->structureLevel = 1.0f`
and OVERWROTE THE ZONE'S VPTR with 0x3F800000; the respawn sweep's virtual
SetGraphicState (vtable+0xC) then called through it -> AV at 0x3f80000c in
RespawnRepair, one frame after a bay-fire death. ALL EIGHT proxy-view sites in
mechsub.cpp swept to the engine view (((DamageZone*)damageZone)->damageLevel
@0x158) -- including two silently-wrong LIVE readers: GetStatusFlags (vptr as
float -> always "intact") and ApplyDamageAndMeasure (the crit cascade's
measure). Ruled out first by evidence: the weapon->bin stamps were all clean
(six stamps, all classID 0xbcb, logged).
#47 (half 1 -- the FIRE ICON): BallisticWeaponCluster::Execute @004c9a38 reads
bin+0x18C = cookOffArmed into the btefire.pcc TwoState, and while armed computes
(Now - cookOffTime)/ticksPerSecond -- the COOK-OFF COUNTDOWN -- into the numeric
beside it. The old reconstruction misread 0x18C as "the reload state" and
bridged the icon to BTAmmoBinFeeding, so it blinked on every feed and never lit
on a bay fire (RajelAran: "it doesn't"). Now driven by the
BTAmmoBinCookOffArmed/CookOffTime complete-type bridges. [T2 -- the data path
is rig-verified; the pixels await the next live session.]
#47 (half 2 -- the ENG-BUTTON FLASH): fully mapped, deliberately NOT built this
session. The authored data SHIPS (BTL4.RES carries exactly one type-31
GaugeAlarmStream); the chain is alarm SetLevel -> gauge-watcher socket ->
Renderer msg 7 -> GaugeAlarmManager::Activate @00448d00 (T0) -> the BTL4
override @004cc148..@004cc2fc (btl4galm.cpp's provenance note claiming "no
override body exists" is WRONG -- corrected in-file) -> LampManager::FindLamp
@00444c80 -> Lamp::SetAlertState @00444e64 (flash counter) -> the L4 flush
@00474e94 emitting flashFast states 0x37/0x13 (== T0 L4LAMP.cpp:234-239).
Missing: the override bodies, the gauge-watcher sender, the aux-button lamps.
3-piece plan in context/open-questions.md.
Also logged: HandleMessage is vtable slot 8/9 in the binary but NON-virtual
across 10 reconstruction classes (bit the BT_BAYTEST hook; typed call used, gap
documented in open-questions).
KB: combat-damage.md (the full cook-off section), decomp-reference.md (the
cluster addresses + the GaugeAlarm/lamp map + BT_BAYTEST env), gauges-hud.md
(the fire-icon correction), reconstruction-gotchas.md #19 (__ftol),
open-questions.md (2 entries), btl4galm.cpp provenance correction.
checkctx CLEAN. 40 LNK2019 unchanged (the two pre-existing families).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 5
|
d39227ef39 |
Gitea #51 ROOT CAUSE: LoopAtWill was mapped to "loop forever", arming 224 of 603 samples as endless OpenAL sources
SAURON's "coolant flush sound glitched and perma" is one instance of a systemic
defect. SetupPatch (L4AUDLVL.cpp) decided looping from the SAMPLE flag alone:
AL_LOOPING = (info.loop != ForceStatic)
That armed every non-ForceStatic sample -- 224 of the 603 authored zones,
including unmistakable one-shots -- as an OpenAL source that never ends on its
own. Any such sound whose note-off never arrives plays forever. Measured 1946
LoopAtWill x Transient arming events in one short session.
The sample flag expresses PERMISSION; the SOURCE decides. Three facts [T1]:
* the enum's own comments (L4AUDLVL.h:14-19) -- LoopAtWill = "will play once
OR LOOP AS DESIRED", ForceStatic = "plays only once EVEN IF LOOPED" (a
veto), LoopAlways = "ramp up and then down";
* LoopAtWill is enum value 0, i.e. the DEFAULT an unauthored sample receives
(WTPresets.cpp:37) -- it cannot mean "loop forever";
* LoopAlways, the real always-loop, is used by ZERO shipped samples.
"As desired" is the source's authored AudioRenderType (Transient=one-shot vs
Sustained=held), streamed from AUDIO*.RES (AUDLVL.cpp:28) and already consulted
by the renderer (L4AUDRND.cpp:567, AUDREND.cpp:184). SetupPatch now takes it,
threaded from all three L4AudioSource call sites (Direct/Dynamic3D/Static3D).
New rule: LoopAlways->1, ForceStatic->0, LoopAtWill->the source's render type.
MEASURED before changing behaviour (BT_LOOP_AUDIT=1, scratchpad/loopaudit.py):
LoopAtWill x Transient -> loop=0 (was 1) 1946 events
LoopAtWill x Sustained -> loop=1 unchanged 65 events
ForceStatic x Transient -> loop=0 unchanged 292 events
The engine loops (EngineAccel07_z0..z2, EngineMotor01, EnginePower01) are all
LoopAtWill/Sustained and PRESERVED -- no regression there. All 24 reclassified
samples are genuine one-shots: laser charge/fire/explosion/loaded, missile
loading, engine shift, coolant pressure inc/dec.
A/B PROOF (scratchpad/loopab.py, same session both arms, only BT_LOOP_LEGACY
differs), asking the engine's own BT_AUDIO_DUMP what is still playing with
loop=1 long after every release:
[legacy] EnginePower01, CoolantPresInc03_z2, CoolantPresDcr03_z2
[fixed] EnginePower01
The two stuck coolant sources are the reported symptom. They were eventually
reclaimed when a later trigger reused the source, which is why the bug was
intermittent -- the "perma" case is when nothing else retriggers it. The fix
removes the mechanism.
BT_LOOP_LEGACY=1 restores the old rule for a field A/B without a rebuild. The
layers to listen to are the beam sustains: LaserA/CSustain* are authored
LoopAtWill on a TRANSIENT source, so they now end with the sample instead of
looping until note-off. The render type is T1 authored data; the interpretation
that LoopAtWill defers to it is a strong reading of the enum + defaults rather
than a disassembled statement, and is flagged as such in the KB.
Plausibly bears on #32 (audio cutting in/out late in a match): a stuck looping
source holds its pool slot for the rest of the round.
Rigs: scratchpad/flushsnd.py (flush start/stop pairing), flushsnd2.py (stuck-
source hunt), loopaudit.py (the classification matrix), loopab.py (the A/B).
KB: context/wintesla-port.md audio section, context/decomp-reference.md env
table (BT_LOOP_AUDIT / BT_LOOP_LEGACY / BT_AUDIO_DUMP / BT_AUD_TAIL),
docs/AUDIO_FIDELITY.md F38. checkctx.py CLEAN.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 5
|
f3bdb3b85a |
Searchlight + ThermalSight ToggleLamp WIRED (#61) -- and a swapped table attribution ROOT-CAUSED, retracting a false "1995 latent bug"
Both classes' Receiver::MessageHandlerSet were default-constructed blackholes (input-path audit systemic cause #1): entryCount 0, no parent chain, Find() returns NullHandler for every id, Receive drops silently. The new unhandled- message trace printed it on the first press: [btntest] PRESS 0x14 at poll 400 [msg] UNHANDLED: Searchlight has no handler for message id 3 Each class now has a GetMessageHandlers() function-local static chained to PowerWatcher's (which name-resolves through HeatWatcher/MechSubsystem to Receiver's empty ROOT set, so id 3 does NOT collide with HeatSink's ToggleCooling), plus a correctly-typed forwarder -- Receiver::Handler is void(const Message*) while the decomp shape is Logical(Message&), so a cast would be UB that merely happens to work on x86 __thiscall. DefaultData re-pointed off the dead empty sets. MessageArg now reads the NAMED ReceiverDataMessageOf<int>::dataContents with a static_assert locking it to the binary's message+0xC (was a raw offset read -- databinding rule). ROOT CAUSE of a long-standing misattribution: @004b860c is **ThermalSight's** ToggleLamp (table @0x51120C), NOT Searchlight's. The two TUs emit parallel shared-data blocks with identical stride (msg entry, +0x5C attrs, +0x84 Performance triple); what pins each entry to its TU is that "ToggleLamp" is NOT pooled across them -- two copies exist, each emitted immediately before its own class-name string ("Searchlight"@0x51144B, "ThermalSight"@0x511475). [T1: reference/decomp/section_dump.txt:69661-69711] Searchlight's own handler is @004b838c, which sits in a Ghidra EXPORT GAP (#60). RECOVERED by raw disassembly of content/BTL4OPT.EXE (scratchpad/dis838c.py, the EjectAmmo technique) -- and it corrected two things I had inferred wrong: * NO ControlsAllowLights/+0x25C novice gate. Searchlight tests the press alone; that lock is ThermalSight-only. A NOVICE pilot CAN work the lamp. * `or word ptr [this+0x18],1` sits AT the jle target -> the graphics-dirty bit (updateModel == ForceUpdate(), per #59) is raised UNCONDITIONALLY. Consequence: the "ORIGINAL 1995 LATENT BUG -- the searchlight can never light" claim is RETRACTED. It compared Searchlight's Performance (@004b841c, reads requestedOn@0x1E0) against ThermalSight's toggle (0x1DC) -- two different classes -- and so invented a missing 0x1DC->0x1E0 bridge. Every sibling toggles the field its own Performance reads. The searchlight DID light in the arcade, the searchlight->fog swap was NOT inert there, and building PullFogRenderable is FAITHFUL rather than a designer-intent deviation (the 2026-07-13 "left as-is" decision is void; the sim needs no repair). Verified live, real click seam (BT_BTNTEST): 0x14 -> [light] requested ON -> reported lightState 0 -> 1 (lamp lights) 0x12 -> [light] thermal sight requested ON -> thermalActive 0 -> 1 UNHANDLED lines for both classes gone; 40 LNK2019 unchanged (the pre-existing CreateStreamedSubsystem + Entity__SharedData::DefaultData families only). Swept the misattribution out of searchlight.cpp/.hpp, thermalsight.cpp/.hpp, hud.cpp:282 (it had claimed @00511180/@004b838c as HUD's), btplayer.cpp's +0x25C consumer list, context/{decomp-reference,subsystems,rendering,open-questions, pod-hardware,experience-levels}.md, docs/{GLASS_COCKPIT,INPUT_PATH_AUDIT}.md. checkctx.py CLEAN. Still open (documented, not fixed): ThermalSight has no visible IR effect (ToggleGlobalThermalVision is a marked no-op, pvision unported, IsLocallyViewed returns False); ThermalSight publishes "LightState"->0x1D8 where the binary has "LightOn"->0x1D8 and "LightState"->0x1E0; Searchlight's commandedOn@0x1DC has no identified role and measured 21 live, hinting our SubsystemResource +0x28 differs from the binary's. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
2edd1b5363 |
Issue #31: wire the EJECT button (EjectAmmo msg 0xb @004bb9b8) -- the in-mission unjam
Disasm-faithful transcription of the export-gap handler onto ProjectileWeapon (MESSAGE_ENTRY id 0xb, the #19 pattern). PRESS arms the ~3s UpdateEject countdown (bin alarm -> Ejecting(3); gate 2 parks the weapon offline mid-eject -- authentic). HOLD to completion = DumpAmmo jettisons the bay -> NoAmmo. TAP (release early) cycles ONE round out via FeedAmmo and returns the weapon to Loading -- clears a jam at the cost of a round (and recovers a FailureHeat 7 while rounds remain). Binary structure kept exactly incl. the press-no-bin fall-through into the release block. AmmoBin: Ejecting(3)/Ejected(4) alarm levels decoded + named SetAmmoState accessor (databinding rule). Always-on forensics: '[weap] EJECT tap' + '[ammo] bay DUMPED overboard (N rounds)'. Rig-verified live (BT_EJECTTEST=1 / =hold on LRM15): taps eject one round each and return the weapon to service (15->8 across cycles); hold dumps all 16 -> NoAmmo. Awaiting a human press of the actual ENG-page button on a jammed weapon. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
225fe43f0c |
CORRECTION: EJECT tap IS the in-mission unjam (EjectAmmo @004bb9b8 decoded)
Old-timer testimony (tap = eject one round, hold = eject the bay, eject clears a jam) checked against the binary: raw disasm of the export-gap handler @004bb9b8 confirms it byte-for-byte. PRESS arms the ~3s UpdateEject countdown (hold-to-completion = DumpAmmo whole bay -> NoAmmo); RELEASE before completion (TAP) ejects ONE round (@004bd4f4) and, with ammo remaining, sets weaponAlarm 3 + restarts the reload -- the weapon returns to service. A tap even recovers a FailureHeat level-7 launcher while rounds remain (empty-bin gate 2 re-pins 7 only when the bay is dry). The earlier 'jams are mission-permanent / no unjam exists' claim read only the HOLD path -- corrected + swept: projweap.cpp case-5/jam-log/ CheckForJam comments, players/README.txt, decomp-reference.md (message-tables entry), open-questions.md (state-7 recovery note). Gitea #31 updated; wiring the handler now restores the pod's actual jam-recovery mechanic. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
21b2bfc1c9 |
Issue #21: overcharge-bricked weapons -- latent ARCADE bug, deliberate divergence
The tester's ER small laser died permanently (recharge arc + ready dot dark, no fire) after idle seek-gear clicking. Root cause, byte-verified + headless- reproduced -- a latent bug in the SHIPPED ARCADE BINARY: - The charge integrates toward the GENERATOR voltage (@004ba838), not the gear target; "full" is only detected inside the +-1% snap window around seekVoltage[idx] (@004ba738), and overcharge reads ZERO (the byte-verified _DAT_004ba830 = 0.0 clamp). - Toggle seek while a charge is in flight and the level can land ABOVE the new gear's window: rechargeLevel pins to 0, the ==1.0 Loaded test can never fire, and charging continues to the generator ceiling where EVERY gear reads overcharged. Permanent brick; generator reselect cannot help. - The arcade dodged it by circumstance (locked 60 fps, rare seek use); the port's clickable seek button hits it in seconds of casual clicking. Fix (marked divergence in the Loading tick): overcharge counts as fully charged -> Loaded. The arcade's own discharge algebra says full == the gear's seek voltage, so an overcharged weapon IS full. Verified: the same 2.5-min BT_SEEKTEST abuse that bricked the laser pre-fix now fires 38 overcharge rescues and ends Loaded/pct=1. [seek] log now also prints the per-gear voltage table + gen voltages (diagnosis instrumentation). Ruled out on the way (documented in #21): overheat fuse (no firing occurred; a 4-min autofire+coolant-abuse run wouldn't fuse), generator detach (gen cycling + healthy siblings), seek-table corruption (table {6000,7000,8000, 9900} healthy). KB: decomp-reference.md records the arcade-latent-bug analysis. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
e9db161404 |
Issue #20: wire Mech BalanceCoolant (id 0x16) -- the auto-cooling-balance button
Third instance of the silent-swallow pattern (unregistered handler id ->
Receiver NullHandler). The Mech handler table @0x50BDF8 binds
{0x16, "BalanceCoolant" -> @0049f728}; the reconstruction never registered it.
Disasm-verified body (@0049f728): press-only guard (msg+0xc > 0; the binary
has NO novice lockout on this one), set EVERY condenser's valveState@0x1D0
to 1 (equal weights), then the shared redistribute @0049f788 -- which the
port ALREADY had faithfully as BTRecomputeCondenserValves (flow =
valve/total + condenserAlarm pulse; MoveValve calls it). So the fix is:
- mech.hpp/mech.cpp: BalanceCoolantMessageID=0x16 + handler + MESSAGE_ENTRY
- heatfamily_reslice.cpp: BTBalanceCondenserValves bridge (Condenser is a
complete type there; sets valves to 1 + redistributes)
- mech4.cpp: BT_BALTEST scripted harness (MoveValve press alternating with
a Balance press)
VERIFIED headless (BT_BALTEST=1 BT_VALVE_LOG=1):
boot -> all valves 1, flows 0.1667 each
MoveValve-> condenser#1 valve 5, flows 0.5 / 0.1x5 (the priority boost)
BALANCE -> all valves 1, flows 0.1667 each (equalized)
Awaiting the tester's live ADV-mode confirmation.
KB: decomp-reference.md Mech-table row marked wired.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 4.8
|
4aab10ba89 |
Issue #19: wire ToggleSeekVoltage (Myomers id 9 + energy weapons id 0xb)
Root cause -- NOT issue #2 (the experience mis-seed pins everyone to VETERAN, which PASSES the novice lockout; the gates were never the blocker). Two unwired handlers, the same silent-swallow pattern ToggleCooling had (Receiver::Receive -> NullHandler for an unregistered id): - Myomers (handler table @0x51158C {9,"ToggleSeekVoltage"@004b8a48}): the reconstruction had an EMPTY stub (the address falls in the untagged decomp gap 0x4b8837..0x4b8a8c) and never registered the id. Body reconstructed faithfully from the raw disassembly (tools/disas2.py 0x4b8a48): novice lockout (@4ac9c8) -> heat-model gate (@4ad7d4) -> press-only (msg+0xc>0) -> currentSeekVoltageIndex@0x320 = (idx+1) % (maxSeekVoltageIndex@0x32C + 1). Modulo from zero, min index not consulted, no ResetFiringState. - Emitter (energy-weapon table @0x511DB8 {0xb,"ToggleSeekVoltage"@004ba478}): the faithful body already existed as the orphaned "AdvanceSeekVoltage" (ZERO callers) -- converted to the registered message handler (same guards; cycle + ResetFiringState when not wrapping, disasm re-verified). PPC and GaussRifle copy-inherit the set; the ammo branch keeps its own id 0xb == EjectAmmo (still unwired, tracked separately). Both registered via MESSAGE_ENTRY on top of the inherited chains. Permanent diagnostics: [seek] gear log (BT_SEEK_LOG) + BT_SEEKTEST scripted dispatch harness (mech4.cpp, the cooltoggle pattern). VERIFIED headless: [seek] Myomers -> 3,0,1,2,3... and [seek] PPC_1 -> 3,0,1,2,3... (modulo-4 wrap, matching the binary's arithmetic). Awaiting the tester's live ADV-mode confirmation for the real MFD button route (the routing layer is the same streamed-EventMapping path ToggleCooling verified). KB: decomp-reference.md message-table rows marked wired. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
89b4f53046 |
Gauges: trigger-config joystick is LIVE -- @004c6ee0 is LinkToEntity, not SetColor
The weapon panel's btjoy trigger-config display (ConfigMapGauge) never rendered because the reconstruction labelled @004c6ee0 as "SetColor(int)" and, finding no caller, concluded the gauge was authentically dormant (task #6), gating it behind a BT_CONFIGMAP dev env. The user challenged this (the PROGRAM/TRIGGER CONFIG button implies the display visualizes your config). Re-verification found the old analysis failed twice: the "no caller" search looked for direct calls to a VIRTUAL, and its slot math used the wrong vtable copy. The real ConfigMapGauge vtable @0051a1b8, matched against the T0 GaugeBase virtual roster (GAUGE.h), pins @004c6ee0 at slot 9 (+0x24) == GaugeBase::LinkToEntity, and @0x94 is the linkedEntity -- the Execute gate is "not yet linked", not "disabled". The engine broadcasts LinkToEntity(viewpointEntity) to every gauge at viewpoint bind (APP.cpp:1277 -> GaugeRenderer::LinkToEntity GAUGREND.cpp:3011), arming the gate -- the joystick DOES render in the shipped game, showing per-trigger mapping state (solid = mapped, matching the DOSBox reference). Port fix: SetColor(int color) -> LinkToEntity(Entity*), color -> linkedEntity, BT_CONFIGMAP dev enable deleted (the authentic path lights it). Render-verified with no env override: the joystick + mapped-trigger lamp draw on weapon panels. KB swept per the correction mandate: gauges-hud.md, decomp-reference.md, open-questions.md, GAUGE_COMPOSITE.md, VEHICLE_SUBSYSTEMS.md. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
cbc5ff9532 |
Wire ToggleCooling (msg 3): restore the coolant on/off button + handler chain
Coolant priority (Lynx: weapon MFD -> Display -> Coolant) was unreachable: the ToggleCooling handler (@004ad6f8, HeatableSubsystem table @0x50E41C id 3) was undefined AND the handler chain skipped it -- PoweredSubsystem::GetMessageHandlers chained straight to the Receiver root, bypassing HeatSink/HeatableSubsystem, so a weapon's dispatch never saw id 3. Reconstructed ToggleCooling from the disassembly (tools/disas2.py 0x4ad6f8): a per-subsystem coolant on/off TOGGLE -- novice-locked (owner->BTPlayer-> roleClassIndex+0x274==0, the same guard as MoveValve), press-only, then flip coolantAvailable(+0x134) 0<->1 and coolantFlowScale(+0x15C) 0.0f<->1.0f. Cutting a system's cooling frees the shared loop for the rest -- the emergent "coolant priority" (the mechanism is a toggle, not a multi-level cycle). - heat.hpp / heatfamily_reslice.cpp: HeatSink::ToggleCoolingMessageHandler (id 3) + HeatSink::GetMessageHandlers. Registered at HeatSink (the abstract HeatableSubsystem never instantiates; every concrete heatable subsystem is a HeatSink, where the coolant fields live) -- identical coverage to the binary's base-table registration, no downcast. - powersub.cpp + Condenser/Reservoir: chain their handler sets through HeatSink::GetMessageHandlers so id 3 reaches every heatable subsystem. - mech4.cpp: BT_COOLTOGGLE_TEST scripted inject (dispatch id 3 to the first weapon) for verification. Verified (BT_COOLTOGGLE_TEST + BT_COOL_LOG, expert egg): "[cool] PPC_1 ToggleCooling reached" then coolant OFF(flow 0.0) <-> ON(flow 1.0) each press -- chain routes, handler toggles, novice guard honored. Both build/ + build-glass/ compile clean; existing ids 4-8 unaffected (found before id 3). NEXT: the #2 MFD button routing. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
70eea6c1a4 |
Boresight parallax FIXED + the #4/#5 verdict instrumentation (Gitea #16, #4, #5)
PARALLAX (#16): the pick/fire ray was anchored at mech.y+5.0 (a port improvisation) while the sight line ran from the eyepoint (y=6.23) -- two parallel rays whose constant offset grew into the reported low-miss as range closed (measured ry +0.072 @50u -> +1.54 @2.7u). The decomp's sight and pick share the eye origin (HudSimulation @4b7830 chain). Fix: the viewpoint mech's cockpit eye owns the aim-camera publish in BOTH views, origin = its own eye translation; leveling + deliberate elevation untouched; chase view now converges to cockpit ballistics (V cannot change where shots land). After: pick pinned to the crosshair (ry <= 5e-6) from 50u to point-blank; 26 laser + 8 missile center-mass hits at 3/4-screen. Awaiting the reporters' approach-test. VERDICT INSTRUMENTATION (#4 closed authentic, #5 verdict posted): BT_RANGE_LOG per-frame pick tracing + BTGroundRayHitExact analytic cross-check (0/8000 arena fall-throughs; cavern 6/8400 single-frame grazes -- the 'crazy sliding' is the authentic world-pick + 500 m/s slide over depth discontinuities); BT_AUD_TAIL StopNote/fade timing + BT_FIRE_PULSE single-shot driver (the energy 'buzz' is the AUTHORED charging loop: crescendo through recharge, 1.309s authored release, measured within one frame). CAVERN.EGG: solo cavern test egg. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
5dd35365c7 |
Glass input audit: RIO mapper id fix (panel banks live), keyboard reconciliation
Root cause of the dead on-screen panel: MechRIOMapper's message-id enum
chained off L4MechControlsMapper::NextMessageID (=0x19), registering all 18
RIO override handlers at 0x19-0x2a while the streamed .CTL EventMapping
records carry the binary's ids -- the binary RIO table @0051dd30 re-registers
the BASE aux/zoom ids 3..0x13 (Hotbox 0x1a @0051de98). Every MFD-bank/zoom
press hit the base ConfigureMappableMessageHandler FAIL trap (26/72 buttons
dead; an abort() on a trap-armed pod). Ids now pinned to the binary
numbering + static_assert-locked (btl4mppr.hpp) -- panel goes 26 -> 52
working buttons (8 await handler reconstruction, filed on Gitea; 12 have no
streamed mapping authored = authentically inert).
Keyboard reconciliation (glass-only): the merged map -- keyboard hosts the
~20 core gameplay actions on the CONTROLS.MAP keys, the panel covers every
pod address by click (right-click = hold latch):
- W/S throttle lever, A/D pedals, Q/E twist, R/F elevation, X all-stop,
arrows drive; numpad flight cluster kept (Cyd)
- 1/2/3/4/Space/LCTRL/RCTRL fire, LALT reverse, B look-behind (0x41)
- M=0x18 mode cycle, N=0x15 display cycle, H=0x2C coolant flush (hold),
C=0x2F Condenser1 valve, G=0x0E weapon-1 configure (Mfd1-Quad-gated)
- F5-F9 = Mfd2 bank 0x27-0x24 + 0x22 (page-gated gen A-D / gen mode)
- hardcoded: ` or V = view toggle, J/K/L = Mfd1/2/3 preset-page cycle
(PadRIO edges -> gBTPresetCycle; no pod "cycle" button exists)
- PadRIO::SuppressKey: bound keys are swallowed from the typed 1995 channel
(the btinput suppression pattern, glass side) -- ends the glass double
dispatch ('w'=pilot select 0, 'a'..'g'=MFD2 presets, NUMPAD/F-key key-up
VK aliases like VK_F5=0x74='t'). Unbound keys keep their authentic
meanings (5/z presets, t-o pilot select, +/- zoom, F1/F2 align).
DISPLACED from Cyd's default bindings (each reachable on the panel or by a
bindings.txt edit -- flagging for Cyd's veto): number row -> secondary panel
(1-4 now fire), QWERTY row -> pilot keypad (dropped), arrows -> hat looks
(now drive), V/C/B -> fire 0x47/0x46/0x45 (now view/valve/look-behind),
LCTRL -> throttle-down (now fire). XInput pad section untouched.
Audit by-products (KB updated): the always-active msg-4 records identified
(0x2C = Reservoir flush, 0x29-0x2F = condenser valves, 0x1A-0x1D =
GeneratorA-D ToggleGeneratorOnOff @004b1ed0 unreconstructed); 0x13 = Mech
DuckRequest (crouch), 0x28 = BalanceCoolant; Searchlight/ThermalSight
ToggleLamp handler-sets are default-constructed EMPTY; weapon Eng-page msgs
0x3/0xb = ToggleCooling / ToggleSeekVoltage / EjectAmmo, all unwired;
unhandled messages are SILENT (no [FAIL] -- census = BT_CTRLMAP_LOG dump x
handler tables).
Verified live (build-glass2, ARENA1): panel presets/zoom/display/flush;
W drive (speedDemand 61.5, gait advances), Q turn (BAS), M -> MID, A turn
(MID), Space fires, N display, J/K/L presets, H flush drain, C valve 1->5;
suppression ('w' swallowed, 't' flows, F5-keyup swallowed); BT_SHOT frame.
Un-regression: pod build (gates OFF) compiles 0 errors, forced-walk drives,
streamed ids unchanged; CONTROLS.MAP/btinput untouched.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
2edde29671 |
Fix 1 (Gitea #12): disasm-exact ProjectileWeaponSimulation @004bbd04 + the dirty-bit sweep
Replace the RivetGun-modeled ProjectileWeaponSimulation body with the fully recovered binary machine (capstone disasm, every branch address-cited): - gate 1 @4bbd36: simulationState@0x40==1 (destroyed) || heatAlarm==FailureHeat || owner disabled -> recoil=rechargeRate + alarm 7 (was: simulationFlags==1) - gate 2 @4bbd71: bin alarm 2/3 or bin destroyed -> alarm 7 re-pinned per frame - Loaded @4bbec2: DENIED shots (viewFireEnable off / no owner target) blip SetLevel(4);SetLevel(2) and STAY LOADED, no ammo pull (the old FireWeapon early-returns under an unconditionally-cycling caller faked a full firing pip cycle -- the "missiles cycle but never launch" incident mechanic); the ammo pull is bin->FeedAmmo @4bbee6 in the CALLER; both updateModel|=1 marks (@4bbf05/@4bbf4c = ForceUpdate) bracket FireWeapon; recoil set @4bbf51 - Loading @4bbdd2: recoil bleeds ONLY here at electrical Ready and CLAMPS at 0 (it ran to -114 before); bin Loaded -> weapon Loaded - 7 @4bbe4d: binary-faithful roach motel (re-asserted unconditionally; recovery = ResetToInitialState only) - slot 17 @004b9c9c reconstructed as MechWeapon::ComputeOutputVoltage (rechargeLevel=(rechargeRate-recoil)/rechargeRate, Emitter overrides with @4ba738) and called from Loading/7 -- the launcher recharge dial ANIMATES (the old "authentically static" claim was wrong) FireWeapon bodies stripped to heat+spawn only per @004bcc60 (no view gate, no ConsumeRound, no recoil); ConsumeRound retired (not a binary method). Gotcha #20 sweep (all sites disasm-verified): simulationFlags|=0x1 == engine DelayWatchersFlag (audio watchers muted forever) removed everywhere -- projweap/mislanch fire marks, ProjectileWeapon::ResetToInitialState (@4bbb47 = updateModel|=1); Emitter::SetDirty retired and split per binary site into ForceUpdate() (@4bafaa/@4ba55d) vs ExecuteOnUpdate() (@4ba99a/@4ba943); Emitter fault gate GetFlags()==1 -> simulationState==1 (@4baab9). AmmoBin::GetAmmoState() accessor added (named-member read of ammoAlarm@0x1A8). BT_LOOK_TEST=<frame> scripted verify added (mech4.cpp): holds the rear-view button 300f on/300f off to drive viewFireEnable headlessly. Verified solo ARENA1 (bhk1, autofire): 54-60 [projectile] PUSH + impact smoke; look-back denial window = trigger pulses, state stays 2, zero launches, resumes on release; enemy (disabled) mech launchers pinned 7 + full recoil; STREAK-6 recharge dial sweeps across BT_SHOT frames; lasers fire throughout; zero gauge faults. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
2215932016 |
KB: Gitea #12 incident findings -- @004bbd04 firing machine recovered, gauge-freeze root cause, dirty-bit gotcha
- decomp-reference: ProjectileWeaponSimulation @004bbd04 FULLY RECOVERED (capstone): fault gate reads simulationState@0x40==1 (not simulationFlags); ammo-bin gates; Loaded-case view/target denial = SetLevel(4);SetLevel(2) blip BEFORE FeedAmmo; updateModel@0x18|=1 is the replication dirty (== ForceUpdate); slot 17 @004b9c9c = rechargeLevel writer; FireWeapon @004bcc60 carries no gating. - gauges-hud: CORRECTION -- launcher recharge dial is NOT authentically static (slot 17 @004b9c9c animates it); MP gauge-window freeze root-caused = lobby-built gauge tree dangling over the launch mech re-stream + permanent SEH disable. - reconstruction-gotchas #20: updateModel@0x18 vs simulationFlags@0x28 bit 0 (DelayWatchersFlag) mis-mapping class (Emitter::SetDirty, mislanch salvo mark). - open-questions: #12 status ledger -- fixes pending a live-verify window; J/K/L preset hypothesis refuted for solo (scripted A/B); symptom-4 pip set unresolved. - GAUGE_COMPOSITE row 13 verdict corrected (WRONG-STATIC, fix pending). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
63b168cb92 |
SeekVoltageGraph: full reconstruction -- the eng-page POWER graph + top-box eraser (Gitea #11)
The #10 audit's one WRONG: the port Execute was a bring-up no-op, so the emitter/myomer engineering pages never erased their top data box -> stale sibling-page ghosts on the shared Eng bit-plane (SYSTEM 10 PPC showing the Streak ammo box, etc). Full faithful widget landed: - btl4gau2: ctor/BecameActive/Execute/clear/ticks/cursor recovered from the capstone disasm of @004c6798/@004c6920/@004c6934/@004c6be4/@004c6c30/ @004c6c6c (Ghidra dropped every x87 arg). Plot: v=0..12000 step 1200, x=Round(response(v)*230), y=Round(v*(1/12000)*187) (ld80 @004c6bd0/@004c6d74 = exactly 1/12000); change-test samples the response at 12000V vs the 9999 activation sentinel; XOR op for tick/cursor move-by-redraw; destroyed branch centres edestryd.pcc and revives via own vtbl+0xC (BecameActive, slot 3 of PTR_0051a1fc -- vtable-dump verified). - The vtbl+0x3C sampler identified from the binary vtables: Emitter slot 15 @004bb42c = sqrt(P(v)/2.0e8), P @004bb3f4 = damageFraction*v^2*0.5* energyCoefficient; Myomers slot 15 @004b8f94 = sqrt(AvailableOutput(v)*3.6/ 350). FUN_004dd138 == sqrt (part_015.c:4026): myomers' fabs reading corrected, GetSpeedReading renamed SeekVoltageResponse. Port dispatch via complete-type bridges BTSeekVoltageSample/BTMyomersSeekSample + BTSubsystemDestroyed (databinding rule). - Emitter's AUTHENTIC attribute table recovered (binary @0x511dd4, ids 0x1D-0x25) and published: Laser*/Seek*/OutputVoltage@0x414 (currentLevel, RAW volts -- the live-cursor feed). Field renames per the table: 0x3F8 minSeekVoltageIndex / 0x3FC maxSeekVoltageIndex (static_assert-locked). The MechWeapon 0x1D OutputVoltage PORT ALIAS retired (binary table ends 0x1C; Find walks lowest-id-first, the alias shadowed the authentic row). PPC::DefaultData -> Emitter::GetAttributeIndex(). - mech4: BT_PRESET_HOLD=<n> (freeze the #9 preset cycler after n pulses) for steady-state pixel verification; BT_SEEK_LOG diag. Verified live (BLH, autofire): both #10 repro pairs held ghost-free for minutes (SYS09->SYS10 PPC, SYS02->SYS04 ERMed, SYS05->SYS06 Myomers); curves draw with live cursors; one replot per activation; quad panels/J-K-L/sec panel un-regressed. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
6783619069 |
Gitea #9: the upper-MFD PRESET pages (3 MFDs x 5) live -- SetPresetMode
table re-decoded to the ModeMFD bits + desktop J/K/L page cycle
The preset system was unwired by ONE defect in the message layer: the
SetPresetMode @004d1b24 table @0051dbf0 had been transcribed from the
section dump as BIG-endian dwords ({0x1e,0x01000000} instead of
{0x1e,0x01}), so a preset press set a garbage high bit -- and for group 1
items 3-4 / group 2 items 0-2 stomped the LIVE NonMapping / Intercom /
ModeSecondary* bits -- while the real page bits never moved. Ground
truth (section_dump.txt:72901-72908, little-endian + BTL4MODE.HPP [T0]):
set = ModeMFD{1,2,3}{Quad,Eng1-4} = 1<<(group*5+item), bits 0-14, fully
disjoint from the #6 secondary trio (bits 18-20); group 2 is MFD3, NOT a
duplicate of the secondary views.
What the 15 presets show (l4gauge.cfg): group = the MFD (Mfd1 lower left
/ Mfd2 upper center / Mfd3 lower right), item 0 = the btquad.pcx Quad
overview (up to 4 vehicleSubSystems cluster panels), items 1-4 = the
full-screen engineering-detail pages (bteng.pcx + prepEngr screens
group*4+1..4 + the cluster eng children: GENERATOR SELECT A-D, POWER
graph, COOLING loop, DAMAGE, ammo). Empty screens are authored per mech
(Blackhawk: 3/11/12 empty).
Authentic dispatch (streamed "L4" .CTL EventMappings, BT_CTRLMAP_LOG
dump): each MFD owns the 8-button RIO bank around it, MODE-MASK-gated --
Mfd1 = 0x08-0x0F, Mfd2 = 0x20-0x27, Mfd3 = 0x00-0x07. Quad page ->
direct-select buttons for the POPULATED eng pages (mapper msgs
Aux1Eng1-4 0x4-0x7 / Aux2* 0x9-0xC / Aux3* 0xE-0x11); eng page -> one
back-to-Quad button (0x3/0x8/0xD) + per-subsystem controls. These
records already install and fire on desktop (btinput passes the live
manager mask), so the NUMPAD profile's 0x20-0x27 keys page MFD2
authentically.
Port wiring (the #6 pattern): keys J/K/L -> actions Mfd1/2/3Cycle ->
gBTPresetCycle -> L4MechControlsMapper::CyclePresetModeNow(group) -- a
documented desktop shim (24 mode-dependent pod buttons don't fit a
keyboard) that cycles Quad -> populated Eng pages -> Quad, visiting
exactly the pod-reachable set; the body is the authentic SetPresetMode.
Dev-composite: BTDrawGaugeSurfaces now draws the Eng1-3 planes at their
sibling cells and skips any mono plane whose channel is BlankColor,
honoring the mode-driven reconfigure (RemapGraphicsPort) -- each dev
cell shows the ACTIVE page like the pod monitor. This supersedes and
removes the 2026-07-12 GAUGREND "frozen-dial" scaffold (forced all 15
page bits active under BT_DEV_GAUGES; it pinned the shared Eng plane on
the highest screen and ate the page flips).
Pixel-verified (BT_PRESET_TEST + BT_DEV_GAUGES_DOCK + BT_SHOT,
Blackhawk): all three MFDs page Quad -> SYSTEM NN eng details -> back to
Quad in lockstep with the [mode] preset mask log; group 0 skips the
authored-empty screen 3, group 2 skips 11/12. Un-regressed: N display
cycle (0x450421->0x490421->0x510421, page bits intact), M control mode,
CONTROLS.MAP 52 bindings parse clean.
Diags: BT_MODE_LOG ([mode] preset), BT_PRESET_TEST=<frame>.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
1d6339b226 |
Gitea #6: secondary MFD Damage/Critical/Heat cycling -- reconstruct the
NotifyOfDisplayModeChange override (vtbl+0x4C @4d1ae4) + wire desktop 'N'
The secondary screen's schematic selector was mislabeled: @004d1ae4 (the
bits-18..20 ModeSecondary* mask swap) was reconstructed as a non-virtual
"SetControlMode" that nothing called, so the desktop stayed pinned on the
Damage view. The binary's L4 vtable @0051e440 pins the truth:
+0x48 = @004d1acc <- CycleControlModeMessageHandler (FUN_004afbe0):
forwards to the base RET no-op @004b048c. A BAS/MID/ADV
control-mode change never touches the secondary view
(empirically confirmed: BT_MODECYCLE_TEST cycles the CONTROL
MODE lamp, mask bits 18-20 unchanged, schematic stays ARMOR).
+0x4C = @004d1ae4 <- CycleDisplayModeMessageHandler (FUN_004afcac):
THE Damage/Critical/Heat selector, indexed by displayMode
(table @0051dbe4 = ModeSecondaryDamage/Critical/Heat).
Authentic pod inputs (streamed type-6 .CTL EventMappings, dumped via the
new BT_CTRLMAP_LOG EVENT records): secondary-panel button 0x15 -> msg
0x15 CycleDisplayMode (manual p13, the "'Mech status Info center" bottom
left of the secondary screen), button 0x18 -> msg 0x14 CycleControlMode
(manual p6, top right), 0x10/0x11 -> ZoomIn/Out. The DOS keyboard
fallbacks (Keypress 0x13d/0x13e = extended F3/F4) are dead under the
WinTesla VK map, hence the desktop pin.
Port wiring (the M/ModeCycle pattern): key N / pad RightThumb -> action
DisplayCycle -> gBTDisplayCycle -> CycleDisplayModeNow() -- the same body
the pod console button message drives. Both .MAP profiles + the
compiled-in default updated.
Verified live (docked gauges + BT_SHOT, BT_VIEWCYCLE_TEST): the sec
panel cycles ARMOR DAMAGE silhouette -> CRITICAL DAMAGE subsystem list
-> HEAT DAMAGE colored list, mask 0x450421 -> 0x490421 -> 0x510421; M
control-mode cycling un-regressed (BAS/MID/ADV lamp cycles, view pinned).
Diags: BT_MODE_LOG, BT_VIEWCYCLE_TEST=<frame>, BT_MODECYCLE_TEST=<frame>,
BT_CTRLMAP_LOG now dumps EVENT records. KB: gauges-hud secondary-view
section rewritten, CLASSMAP +0x48/+0x4C slots, decomp-reference env
gates, GAUGE_COMPOSITE phase-4 entry resolved.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
0bcba26213 |
KB: land the EXPERIENCE-LEVELS decode from glass-cockpit (Cyd)
Brings Cyd's experience-level / simulation-mode research onto master (the KB-decode portion of glass-cockpit 4e01e83; the bundled BT410 source manifest is left for the full glass-cockpit merge). - context/experience-levels.md (NEW): the egg per-pilot 'experience' field (novice/standard/veteran/expert) is the pod's SIMULATION-FIDELITY tier, decoded end-to-end. FUN_004c0bc8 reads btMission->experienceLevel(+0xe4) and fans it into the +0x25c/+0x260/+0x26c/+0x270/+0x274 flag block: +0x25c 'sim live' (novice lockout: jams/searchlight/powersub), +0x260 the HEAT-MODEL master switch (veteran+expert; FUN_004ad7d4), +0x274 raw level (FUN_004ac9c8 = ==0 novice predicate; the valve/advanced-cockpit lockout). 4.0->4.10 drift: the viewscreen hunting-aid gate is GONE in 4.10 (HUD reads none of these flags), and movement heat is veteran+expert not expert-only. - btplayer.cpp/.hpp: CORRECTED comments/labels -- the +0x25c..+0x274 block is seeded from btMission experienceLevel/advancedDamageOn, NOT the scenario role's returnFromDeath; the 'roleClassIndex/showKills' names are scoring-era mislabels. Code logic UNCHANGED (comment-only): the ctor still reads scenarioRole (STAND-IN, defaults 2 = veteran) pending the wiring task. - Corrections swept into gauges-hud.md (ROOKIE->novice lockout), open-questions.md (player+0x260/0x274 semantics now PINNED), pod-hardware.md, subsystems.md, decomp-reference.md; CLAUDE.md router row. No code-logic change -> no rebuild needed (comment + markdown only). The runtime wiring (seed from BTMission::ExperienceLevel()) remains TODO. Co-Authored-By: Cyd <cyd@falloutshelterarcade.com> Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
d26d0375ae |
Docs sweep: README + KB catch up with the full session's work
Coverage audit of this session's ~30 commits against the docs found
gaps; fixed:
- README §Multiplayer was stale (only the old mesh flow, 'combat in
progress'): now leads with the relay + operator-console path
(internet play, join.bat/play_solo.bat, patient wait) and lists what
the mesh path has verified (4-pod, camera seat, callsigns, clock);
README controls line updated (turn/twist/pitch, pad, CONTROLS.MAP)
- decomp-reference env table: added BT_CAM_LOG, BT_SPEC_LOG (were in
code, not the hub); BT_INPUT_LOG note gains the twist/elev axis
- pod-hardware §input remap: the AXIS SIGN CONVENTION finding
(positive sim = CCW/left; bridge negates once per channel;
screenshot-forensics lesson) was only in commit
|
||
|
arcattackandClaude Fable 5
|
74d9d3b6ff |
Camera networks FOUND: BTL4.RES type 27, all 8 maps -- KB corrected
The 'cameras\ directory missing, ask Nick' entry (
|
||
|
arcattackandClaude Fable 5
|
980c9cd7e5 |
Input remap: CONTROLS.MAP binding engine + XInput gamepad support
The pod's controls reach the game through the RIO serial board; on a
desktop that hardware is a keyboard shim of hardcoded GetAsyncKeyState
reads. New binding engine (game/reconstructed/btinput.cpp) maps PC keys
and an XInput pad onto the authentic channels through a user-editable
file (content/CONTROLS.MAP, community-suggested grammar, corrected):
key/pad -> button <addr> real buttonGroup emissions, mirroring the
RIO convention exactly (press a+1 w/ mode
mask saved, release -a-1 w/ saved mask;
L4CTRL.cpp:2470-2520) -- aux/preset banks,
hotbox, panic, reverse thrust all reachable
key/pad -> axis Throttle rate (lever), pedals/JoystickX
deflect (turn/twist) into the existing
virtual-controls integrators (feel, gait
detent, spring-centering all unchanged)
keypad pilot|external <n> keyboardGroup key values ('0'-'F')
pckey <char> any authentic 1995 typed hotkey
action <name> port dev controls (view, all-stop, ...)
Keys claimed by a binding are SUPPRESSED from the legacy WM_CHAR/KEYUP
feed -- ends the historic double-dispatch ('w' drove AND selected pilot
0; F5's key-up value 0x74 aliased to the 't' hotkey; letter key-ups fed
the developer fake-event dispatcher). Unbound keys keep their authentic
meaning. The dual-use 'V' is split: V = view toggle, B = look behind.
Default profile = WASD classic (compiled-in twin; delete the file to
restore). CONTROLS_NUMPAD.MAP ships the corrected community layout
(keypads are NOT buttons 0x50-0x6F -- that space doesn't exist; no
clickable cockpit exists so everything needs a binding; keyboard fire
buttons added; 0x36/0x37 are hotbox not 'config'; missiles moved off
Ctrl). XInput loads dynamically (1_4 -> 9_1_0), disconnected-pad
probing rate-limited; pad sticks write the axes as absolute positions
(the spring is physical), triggers/buttons per the file.
Verified live: bindings load (43), W and NumPad8 drive (speedDemand 0 ->
61.5), X all-stop (spd -> 0), aux-bank emission (D1 -> [input] 0x2f
PRESS/release under the numpad profile), suppression both directions
(posted 'r' reaches [keych], posted 'w' swallowed), full-keyspace
WM_CHAR+WM_KEYUP fuzz x3 survived with sim advancing, XInput graceful
with no pad, 2-node relay session un-regressed (full ladder + UDP).
Pad-in-hand testing still needs a physical controller.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
0fcd0c3106 |
KB sweep: env-gate hub table catches up (BT_RELAY/BT_SELF/BT_KEY_STOP/...); stale MP remaining-work line updated; gauges-hud callsign cross-ref
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
224092aaff |
KB: reconcile the context system with the day's work
- decomp-reference.md: the binary ATTRIBUTE-TABLE section -- 16-byte
{id,name,off+1,0} row format (alignment warning), the walker technique,
and the three recovered tables (Mech ids 21-56 incl the corrected
EyepointRotation@0x360 / RearFiring@0x410 / DistanceToMissile@0x400
labels; HeatSink 3-12; Torso 3-15; the weapon RearFiring 'b' marker).
- combat-damage.md: the REAR-FIRE + look-view system (roster survey: the
Blackhawk's ERMLaser_2/3 are the game's only rear weapons; every missile
rack forward), the missile mount-frame launch truth, and the BANKED
full Missile flight-model decode (three performances, proximity fuse).
- wintesla-port.md: post-Phase-4 closures (instability model live, F14
static filter baked, the footstep warm-up bug + its trace-cap lesson);
deferred list trimmed to F21/HRTF.
- AUDIO_FIDELITY.md: status block -- F14 FIXED, warm-up bug noted.
- open-questions.md: "which mechs used rear fire" answered from data;
remaining look-view key bindings noted.
checkctx: CLEAN.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 4.8
|
82e6bb306a |
KB: sweep STALE "unfinished" claims -> match landed commits (context-system audit)
4-agent audit cross-checked every open/pending/stub/deferred claim in the context system against git + code. Fixed ~13 stale spots (currency only, no code change), each contradicted by its own file body + a landed commit: - 0xBD3 SubsystemMessageManager (task #7, |
||
|
arcattackandClaude Fable 5
|
02cdfd6576 |
Torso: the TWIST goes LIVE -- electrical watchdog chain, centered crosshair, coherent controls (task #57/#58)
The MadCat torso twists, the view turns with it, and targeting follows. Three reconstruction fronts closed: THE ELECTRICAL WATCHDOG CHAIN (why the torso never powered up): - PowerWatcher::UpdateWatch reconstructed (@004b181c, the REAL registered Performance -- PTR @0050f5fc; Ghidra missed the fn start): the watchdog MIRRORS the watched subsystem's electrical level (+0x278), brownout downgrade when gen output <= minVoltage% x rated. @004b1804 relabeled ResetToInitialState (slot 10) -- the old "Simulation" tag was wrong. - The factory watcher-CONNECT pass reconstructed (vtable slot +0x38, @004aee2c/@004b1a40 byte-identical, recovered from raw exe bytes): watchedLink.Add(roster[watchedSubsystem]) on the master node. Was the SubProxy::Start() no-op -- every watchdog sat at 0 forever. - MinVoltageScale = 0.01 (a 10-byte x87 literal @0x4b1924; was 1.0f = permanent brownout) and PowerWatcher's Derivation chains its REAL base HeatWatcher (the HeatableSubsystem stand-in broke IsDerivedFrom for the whole Torso/Searchlight/ThermalSight family). - KB correction swept: derivation tag 0x50e604 = HEATWATCHER (not "HeatSink"); the btl4gaug heat-widget gate now tests it via the BTIsHeatWatcher bridge. THE CROSSHAIR (task #58 forensics, 6-agent workflow + live probes): - The VIEW is TORSO-MOUNTED: jointtorso -> jointeye -> siteeyepoint in every twist-capable .SKL; the camera + canopy ride the same hinge subtree through HingeRenderable's live matrix-stack compose -- ALREADY WORKING in the port. The crosshair stays screen-centered (center IS the boresight); the twist reads on the tape carets/compass/radar. - The real bug was the port's gBTAimX = tan(twist) slew (the falsified "body-mounted view" model): the camera already carried the twist, so the crosshair counter-slid to hull-forward and the fire ray with it. Deleted; the pick ray inherits the twist from the yawing eye basis. - Two instrumentation traps documented (chase-eye-as-default-camera, BT_FORCE_TORSO clobbering real joints -> the hook now only fills unresolved ones); an over-correcting explicit eye compose was added on those false readings and retired the same day. CONTROLS + REPLICATION: - Q/E spring-center on release (the axis is a twist-RATE demand; the old hold-deflection model drifted forever); X also zeroes the axis and pulses the authentic torso Recenter (@004b6918). M cycles control mode via the real CycleControlMode body. - Torso update-record DIRECTION fixed: engine truth is Write=serialize / Read=apply; @004b6a78 is the READ (was mislabeled Write) and the missing WRITE @004b6a1c recovered from raw disasm (recordLength 0x1C, twist/vel/rate at +0x10/14/18) -- kills the replicant's 0xCDCDCDCD -140-degree ghost twist. - Marching-ghost desync: 4 Standing-case guards zero stale reverse cycleSpeed (negative cadence passed the <= ZeroSpeed stop gate). - Kill credit rerouted to the OBSERVED killer (lastInflictingID -> killer's player link) -- kills count, target K/D populates. KB: subsystems.md (watcher chain), multiplayer.md (record direction), combat-damage.md + gauges-hud.md + cockpit-view.md (torso-mounted view re-correction), decomp-reference.md (new addresses + tag fix), open-questions.md (dead capability-roster loops 2-4, snapshot CD read). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
dd27238ceb |
Gauges: the CLOSEOUT wave -- radar pips, Myomers dedup, attribute parity, ledger sweep (tasks #14-#17)
TASK #17 -- AUTHENTIC RADAR SYMBOLOGY (the cross-blip stand-in retired). The recon proved the 'missing pip raster set' never existed as BT game code: pips are the ENGINE's L4GaugeImage vector-stroke system (T0 source in tree, L4GAUIMA.cpp == FUN_0046f0c0 line-for-line), the 'pip table' is L4Warehouse:: gaugeImageBin keyed by Entity::resourceID, and BTL4.RES ships 110 type-0x12 shapes (every mech/vehicle/building/tree). The six btl4rdr stubs are wired to the real facilities: contacts draw their authentic model silhouettes with LOD selection, the target gets the binary's 4px-inflated box highlight, and player-name labels resolve via Mission::GetSmallNameBitmap (the prebuilt 64x16 egg rasters keyed by the player's bitmapindex). DECODED: the invented 'VideoObject' was Entity::owningPlayer all along (+0x190; nameID = playerBitmapIndex@0x1E0, target = BTPlayer::objectiveMech@0x284 -- new bridge BTPlayerObjectiveMechOf); the 'LabelledEntity' class is Landmark (cultural.h; label path dormant -- no landmark content ships, no runtime landmarkID writer). The L4GREND BT_DEV_GAUGES warehouse guard is removed (its AV had a different culprit, below); resource type 18 corrected to GaugeImageStream in decomp-reference (was mislabeled 'ModelList'). TASK #14 -- the Myomers ODR duplicate ELIMINATED: the powersub.cpp/hpp 'Myomers' (classID 0xBC3 -- actually Sensor) is retired whole; it duplicated ?DefaultData@Myomers@@ against the real class (dumpbin-verified) and /FORCE picked the winner by link order. The real Myomers (0xBC6) now chains PoweredSubsystem's handler set (ids 4-8) and publishes its SEVEN binary attributes (@00511588: SpeedEffect/Current/Recommended/Min/MaxSeekVoltage- Index/SeekVoltage/OutputVoltage) -- the old empty unchained index starved the Myomer engineering panel of every resolve. TASK #16 -- attribute parity: MechWeapon publishes the FULL binary table @0x511890 (11 entries; ids renumbered to binary truth -- the port aliases had squatted the binary's DistanceToTarget/TargetWithinRange ids; the streamed TriggerState 0x13 binding unchanged). Binary names resolved two TODO members: pipState -> estimatedReadyTime (attr 0x1A), and the EXT-model flag is the binary's RearFiring (0x1B). ThermalSight LightState published. HUD (offset conflicts) + missile-side tables (id encoding suspect) documented for a re-dump instead of publishing blind. THE CRASH THIS EXPOSED [T2, cdb-verified]: gotcha #11's dense-table gap is a LATENT AV, not a guaranteed one -- the old table's 0x0D..0x12 gap (task #5) survived on heap luck; the renumber reshuffled allocations and Find() AV'd on a garbage entryName in WeaponCluster's PercentDone resolve. Fixed with five named PAD entries (the mech.cpp attrPad idiom) + a static_assert locking the pad base to PoweredSubsystem::NextAttributeID. Gotcha #11 amended with the proof. TASK #15 -- stale-ledger sweep: GAUGE_COMPOSITE ('composite not yet built', Reservoir shadow, PlayerStatus/vehicleSubSystems 'remaining', valve-dormant- until-0xBD3, sensor guard, the superseded 'Heat MFD near-static' reframe -- all banner-corrected), gauges-hud frontmatter, L4VB16 + powersub comments. Verified live: 50/50 config attribute bindings resolve, 0 NULLs, 0 parse skips, mech spawns and simulates 31/31 subsystems, no cross-blip fallbacks, the pip cache fills through entity registration without the old guard. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
092408041c |
Cockpit: the CONFIG-MODE weapon-regrouping session + the live-play fire fixes (tasks #6+#11)
TASK #6 -- the pod's in-cockpit weapon regrouping, fully reconstructed and live-verified (hold-configure -> tap fire button -> toggle membership -> release-commit): - MechWeapon handlers id 9 ConfigureMappables @004b9550 / id 10 ChooseButton @004b95b8 (binary table @0x511860; the old "Myomers fns" mislabel swept) + the GetMessageHandlers() accessor chain through Emitter/ProjectileWeapon/ MissileLauncher/GAUSS/PPC (empty per-class sets swallowed dispatch). - Mapper vtable truth: +0x38 EnterConfiguration / +0x3C ExitConfiguration / +0x40,+0x44 AddOrErase evt/dir. No "secondary vtable @0050f498", no "CreateTemporaryEventMappings" virtual (RP-name drift; swept incl CLASSMAP). L4 Enter/Exit rebuilt complete: StartMappableButtonsConfigure (the NonMapping 0x10000 <-> Mapping 0x8000 mode flip + the gauge's active-weapon latch) + the held-button re-arm + the 4 fire-button temp maps; only the RIO mapper implements the toggle (Thrustmaster no-ops = can't regroup). - MechSubsystem +0xE8/+0xEC corrected to controlDestination/controlMessageID (ex hostEntity/subsystemId2 mislabel); MechWeapon ctor defaults the destination to &fireImpulse (@004b99a8). - ConfigMapGauge state loop reconstructed (PE-recovered DAT_00518eb4 table; buttonGroup GetMapState sampler -- the "needs ModeManager" guard rationale was wrong). Finding [T1]: the shipped binary NEVER enables this gauge (no SetColor caller) -- authentically dormant; BT_CONFIGMAP=1 is the dev enable. - Dev harness: HOLD 'G' opens the session (BT_CONFIG_SLOT picks the weapon); BT_CONFIG_TEST scripts a headless verify. @004afbc4 corrected to its real Fail-trap body (the guessed AddOrErase(NULL) body would corrupt groups). - Bonus [T1]: the binary MechWeapon ATTRIBUTE table has ELEVEN entries (PercentDone..WeaponState) -- "TriggerState is the only one" was wrong. TASK #11 -- the user-reported live-play regressions (both real bugs): - PHANTOM FIRE: the mech4 bring-up shot block painted an explosion at the victim on its OWN 0.3s cadence whenever fire was held -- desynced once the authentic recharges landed. Retired (the real impact visual flows from each discharge via the messmgr SubmitExplosion). - WEAPON BRICKING (the "cuts out" bug): the Loading->Loaded snap window (+-0.01 around seekV) assumes the pod's LOCKED 60 fps; one port dt-spike jumps it, the byte-verified >1.0 clamp (_DAT_004ba830=0) zeroes readiness, and the weapon sticks in Loading at level ~10000 forever (observed live). Fixed with pod-frame (1/60s) sub-stepping of the binary's own Loading tick -- also fixes the I^2R integral over-heating generators on big steps. NEW GOTCHA CLASS recorded: reconstruction-gotchas #12 (frame-pacing trap). - Duty-cycle measured (max-rate autofire): generators equilibrate in the degradation band (recharge stretch ~3.5-4.4x), the FailureHeat breaker never trips solo, PPCs sustain ~11.8-damage full-charge fire. The slow kill pacing and recharge gaps are the AUTHENTIC heat economy; the pilot's counters (this regrouping UI, generator reassignment, coolant valves) are the reconstruction queue. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
4e63a7b6c3 |
Heat: THE AUTHENTIC ELECTRICAL MODEL -- weapons recharge from generators (task #10)
Task #10 set out to fix "scrambled linked-sink routing"; a [heat-link] attach log proved the routing was NEVER scrambled (every subsystem links its authored condenser exactly; the "pools in Condenser1" read was the diagnostic-sampler aliasing trap). The real defect: emitter.cpp's local FUN_00417ab4 stub returned NULL, so the whole electrical model was inert and the E7 force-charge recharged every emitter in ONE frame (~0.3s cycle, 1501 fires/90s, ~1.7e9 heat/s -- the "runaway"). Landed authentically [T1: disasm + byte-verified constants]: - Emitter ctor @004bb120: seekVoltage = authored fraction x generator ratedVoltage (10000); EC = energyTotal/(seekV^2 x 0.5); voltageScale@0x310 = (RechargeRate / -ln(1 - 1e-4 x seekV)) / EC -- charge reaches seekV[rec] in EXACTLY the authored RechargeRate (PPC 5s, ERL 4s, SRM 3s, ERM 2s) cold. Owner-flags ctor gate (the usual gotcha; the this-flags read never armed). - PoweredSubsystem::ChargeTimeScale (@004b0d50, was a =1.0 stub): voltageScale x (1 + thermalResistivity x srcTempRise) -- hot generators charge slower. ("voltageScale is never read back" was wrong; corrected + swept.) - TrackSeekVoltage @004ba838: charging I^2R -> the GENERATOR's pendingHeat (~3.5e8/full PPC charge) -- generators self-heat, conduct to their authored condensers, and throttle further charging. The feedback economy closes. - FailureHeat consumers found: this+0x184 == 2 gates BOTH weapon families (@004baa88 emitter: reset firing + hold charge 0; @004bbd36 ballistic: recoil=rechargeRate + alarm 7). Emitter::GetFaultState un-stubbed. - ProjectileWeaponSimulation @004bbd04 opens with call 0x4b0bd0 (disasm) -- launchers now run the powered/heat step (their firing heat previously accumulated in pendingHeat forever). - heat.cpp: per-instance BT_HEAT_LOG census (the old shared-static 1-Hz sampler aliased); [heat-link] attach log; the stolen-else Verify restored. Verified live (120s max-rate autofire): PPC ~470-500 (was 55,000), bank plateaus ~600 and sheds to ambient, generators 1100-1400, ERMLaser self-regulates at the authored 2000 failure threshold (shutdown-cool-resume). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
001ca16af9 |
KB: crit-propagation landing recorded (task #2)
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
3c34ae6de6 |
KB: full staleness audit + sweep -- 35 verified corrections across 16 topics, 15 new glossary terms
Adversarially-verified audit (18 agents) against the task #46-#56 landings: MP/current-state understatements, superseded punch readings, retired env gates, dead paths, line-cite drift; env-gate hub table completed. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
96b8892e7c |
Cockpit: the authentic punch STENCIL-CUT -- all 8 cockpits real (task #55)
The user caught the inversion (blocked viewports, see-through frames); the
answer came from the rasterizer board itself: an i860 disassembly of the
VREND.MNG firmware decoded the damageize handler (@0xf040f6f8) -- cmd 0x20
(vr_damage_action) writes the dpl_Punchize token triple onto the punch
geogroup's first three geometry chunks IN FILE ORDER:
chunk1 = the detailed window-aperture shapes -> an invisible per-pixel MASK
chunk2 = the coarse hull -> the ONLY colour-drawn geometry (where not masked)
chunk3 = byte-identical hull twin -> the damage-reset record, never visible
Visible canopy = hull-minus-apertures. Both earlier readings were wrong ways
around the same three chunks: dropping all punch left floating fragments (no
hull); hiding the duplicate pair hid the HULL and drew the MASK -- the exact
inversion observed.
Port: bgfload tags per punch patch {non-paired pmesh = mask (role 1),
first twin = hull (role 2), second twin = skip}; L4D3D DrawMesh runs
mask->stencil-1 (no colour/z-write, z-tested), hull->stencil-NOTEQUAL,
mask->stencil-0; device D24X8 -> D24S8 + stencil clear. The cut never
touches z, so later-drawn entities show through the apertures.
BT_COP_PLATES=1 disables (diag).
In-game, all 8 mechs on pure defaults: connected dark frames with clear
viewports -- thor (the footage mech) shows the central viewport + surrounding
frame exactly as filmed. Combat regression clean (kill + no NaN).
Arena textured punch uses the same firmware kit; the black-texel alpha path
there is a working approximation, flagged in the KB.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
946323b696 |
Gyro: damage fan-out FUN_004b2980 -- the cockpit hit-BOUNCE is live (task #56)
Re-disassembled the unexported gap 0x4b2980-0x4b2d8b byte-exact (capstone over
section_dump.txt) and reconstructed Gyroscope::ApplyDamageResponse:
- zero-damage + Collision(type 0) no-op; hit direction = Damage::damageForce
or a RANDOM horizontal fallback when ~zero (per-component sign roll then
value roll -- binary-legal until senders fill damageForce)
- direction rotated by the yaw-only torso-twist frame (placeRot=(0,twist,0)
-> euler->matrix, the FUN_00408744 raw row-dot reproduced verbatim)
- per-type scaling amount / damageMultiplier[type] * damageResponse[type]
.{trans,pitchRoll,yaw,vibration}; Explosive alone multiplies burstCount;
each clamped at 1.3f
- four kicks: impulse(trans, dir), torque(pitchRoll, dir), impulse(vibration,
vibrationDirection@0x390) and verticalImpulse(yaw, dir)
Layout corrections (byte-verified): gyro+0x390 is ONE Vector3D vibration axis
init (0,1,0) -- was mis-split as scalars animationOffset/Scale/Phase; mech
+0x5c4 is a FLOAT rumble-period countdown (gyroRumbleTimer) -- was mis-typed
int clipLoadGuard.
Call sites wired (binary-gated):
- take-damage hub: mech.cpp TakeDamageMessageHandler, FIRST action (@0x4a0264
in hub FUN_004a0230) -- an invalid-zone hit still bounces
- crushable-icon crunch: mech4.cpp, torque 0.4 along the bounce delta-v + up
impulse 0.2 (@4aa81e/@4aa86c)
- firing recoil: projweap.cpp FireWeapon, damage>3 -> impulse (0,0.6,-1.5)
x damage/16 (@4bc136-4bc19c) via the new Mech::GetGyroSubsystem accessor
DEFERRED (recorded in KB with the byte recipe): the alternate-gait engage
jolt + 0.4s rumble (@4aa158-4aa365) -- its gates are [T3]-flagged and it
mutates the #49/#50-stabilized gait machine.
Verified live: [gyro-dmg] fires per hit with correct type scaling; eyePosition
shows the damped bounce (ramp to ~0.015u, oscillating Y, decay to zero); kill
chain un-regressed; no NaN.
Also recorded in KB: the OFFSET-COCKPIT verification -- Thor's authored
jointeye tranx=+1.13 matches its canopy X-center exactly AND our in-game eye
reproduces it to the hundredth (the placement model is correct per-mech); and
the playable roster is 8 models (strider/raptor/firstrtr/blkjack have assets
but no model resource -- BT_FORCE_MODEL with those names = NULL-resource AV,
cdb-verified, not a code bug).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
abaa145b6f |
Cockpit: authentic eyepoint + canopy lattice render (task #55)
The first-person cockpit now shows by default and matches gameplay footage (verified on the Madcat). Two decomp-verified reconstructions: EYEPOINT (FUN_004579a8 + caller part_014.c:5525, FUN_004c22c4): - eye offset = siteeyepoint GetBaseOffset (not GetSegmentToEntity, not the upright hack), parented on the PARENT segment DCS (btl4vid.cpp) - live view = affine INVERSE of the eye world matrix (L4VIDRND Execute) -- replaces the hand-rolled LookAtRH whose +Z-forward/+Y-up row guess aimed some mechs into the canopy; combine order fixed to baseOffset * R - chase camera basis + aim boresight re-expressed for the inverse convention (row2 = back); boresight now derives from the view matrix (the stale rows aimed the pick ray at the sky = no target, no discharge) CANOPY (*_COP.BGF, dpl_Punchize geogroups): - every shell is an open strut lattice (38-59% boundary edges, all 12 mechs); rendered single-sided with per-face INWARD winding (l/r torso patches are mirrored, so no global winding works) the struts are the dark frame and the openings show the world - frame colour = the 'softer' ramp near its dark end (texture-less unlit ramp; BLXSKIN.BMF has no texture -- the old "punch texels" theory was wrong) - scoped by filename (meshIsCop); wrong drop-punch + view-cut paths removed - BT_FORCE_MODEL=<name> forces the player mech for per-mech bring-up KB: new context/cockpit-view.md topic; punch split corrected in bgf-format; gotchas 14 (LookAt axis guess) + 15 (per-patch edge namespaces); env gates + eye/punch addresses in decomp-reference. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
0bfb3d4ab3 |
Warp: restore the translocation-vortex look + fix texture-scroll precision collapse (task #52)
The death/respawn "blue whirlwind" (tsphere) now matches the original cabinet
photo (capture.png): a smooth spinning lavender vortex with a bright core.
Root cause of the long-standing "radial spokes" artifact was NOT the warp code
but a general engine bug: L4D3D::SetTextureScrolling computed its texture-matrix
offset as scrollDelta * absolute_time, which grows unbounded and collapses UV
float precision -> a smooth scrolled cloud shatters into grainy radial steps.
Wrapped with fmodf(..., 1.0f) (identical under REPEAT tiling, full precision).
This also cleans the scrolling bexp beam grit and any other SCROLL material.
Visual reconstruction (verified against the real 45-vtx TSPHERE.BGF bicone,
offline-rasterized then ported):
- view ON-AXIS (eye centred on the throat) + spin in place -> concentric rings
(decomp FUN_00453dc4 does spin-about-local-Z + submit; the port had stubbed it)
- bintA cloud through a WIDE lavender ramp at full contrast (drawn as SKY);
no geometry "bands", no log-polar twist, no off-axis tornado (all discarded)
- tessellate the 12-facet bicone smooth; isotropic + trilinear; ramp baked into
the texture and drawn SELECTARG1(TEXTURE) to avoid double-tinting
Env knobs (BT_WARP_*) default to the verified values; BT_WARP_SELFTEST/SELFSHOT
are an off-by-default visual-verification harness (backbuffer frame dump).
Docs: new context/translocation-warp.md (geometry/material/visual/lifecycle/env);
reconstruction-gotchas.md gains the accumulated-time precision-collapse bug class;
rendering.md / multiplayer.md / decomp-reference.md / CLAUDE.md cross-linked.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
d78bde066d |
Authentic target acquisition LIVE: reticle slew + pick-ray lock + aimed zone damage (task #36)
The engine Reticle model (MUNGA/RETICLE.h [T0]) reconstructed end to end: - Mech::targetReticle is a real Reticle member bound to the TargetReticle attribute (0x1d), per the RP VTV analog (VTV.h targetReticle). - Crosshair slew: mouse -> client rect -> reticle coords (the pod stick free-aim channel's dev-box stand-in); BT_AIM="x y" pins it headless. LMB fires lasers / RMB missiles (alongside SPACE/CTRL). - Pick ray: the ACTIVE eye publishes pos + LookAtRH basis (BTSetAimCamera, L4VIDRND view-write site) + the render loop publishes proj._22; BTGetAimRay builds the world ray, Mech::PickRayHit slab-tests it against the collision template's ExtentBox via the engine's BoundingBox::HitBy (local frame; clips the Line at entry) -> world hull point. - Designation: the mech under the crosshair designates (sticky; re-hover refreshes; cleared when the target leaves the roster at burial); the entity target slots 0x37c/0x388/0x38c feed the whole weapon path. - Aimed fire: while HOT the impact point is the PICKED hull point -> the STEP-6 cylinder lookup resolves the zone under the crosshair (verified: center-aim -> head-band zone 13 dominant). Off-crosshair the sticky designation converges on center mass. - HUD: the aim group draws at the slewed position ([0x9a] translate, contained by push/pop); the designator ring tracks the target's projected point (subB9 hot / subB8 designated, BTProjectToReticle); edge arrows when off-screen/behind. - AUTHENTIC gating: no fire arc exists in the binary (FireWeapon fires whenever HasActiveTarget, part_013.c:7758) -> BT_FIRE_ARC is now an explicit OPT-IN presentation clamp; the hardwired gEnemyMech lock and the projectile path's gEnemyMech fallback are removed. - Fixed en route: every renderable rebuild stomped mCamera back to the chase eye (start-inside silently lost the cockpit camera; the aim feed exposed it). BTL4VideoRenderer::mViewInside persists the chosen view. Verified headless: BT_AIM="0 0" -> HOT lock, pick hits the hull face at exact range, aimed zones resolve; BT_AIM="0.8 0.3" -> no lock, zero damage, zero missile launches; kill chain completes to wreck + smoke. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
48b17750e5 |
HUD reticle + weapon pips LIVE: dpl2d 2D display-list port (task #35)
- dpl2d API fully recovered from the binary recorders (@487f34-488630): opcode model (points/lines/polyline/circle/color/width/matrix/push-pop), CallList = INLINE include (state persists to caller), centered coordinate frame (unit = half viewport height). game/reconstructed/dpl2d.cpp rework. - BTReticleRenderable ctor @004cc40c transcribed with the authentic calibration (originX .35, originY .25, scaleY .5, 0..1200m right range ladder, bottom heading tape, FUN_004cd938 tick ladders, lock rings, turn arrows); range caret slides from the live target range fed by the mech4 targeting step (BTSetHudTargetRange). - Weapon pips: the binary gate is IsDerivedFrom(0x511830 = MechWeapon::ClassDerivations) [T1: part_014.c:5386 hard-aborts on missing weapon attrs; part_012 counts + roster ORs capabilityFlags@+0x334] so ALL 7 BLH weapons register (3 lasers + 2 PPCs + 2 MissileLaunchers). Pip A (lit, authored PipColor) on TargetWithinRange, else dark ring B. - AddWeapon @004cdac0 store map corrected to the verified order (part_014.c:4827-4837); both state attrs are literally named "SimulationState" (strings @51d526/51d577) -> weapon simulationState. - Mech roster this[0x1ef] renamed poweredSubsystems -> weaponRoster (0x511830 is MechWeapon, not PoweredSubsystem=0x50f4bc); derivation-tag table added to context/decomp-reference.md. - Draw hook BTDrawReticle after the 3D scene, cockpit view only. Binary Execute @004cdcf0 is an un-exported gap -> Draw dynamics [T3], tracked in context/open-questions.md with the blx_cop canopy + PNAME pip meshes. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
5b7f3a1c40 |
context: sweep the 0xBD3/mech+0x190 correction across all topic files
Propagate the verified finding (0xBD3 = damage/explosion hub @0x434, NOT the valve/message gate; the valve/Myomers gates read the owning BTPlayer @mech+0x190) into the topic files that still carried the old claim: decomp-reference (ClassID row + both offset rows), gauges-hud, subsystems, open-questions (Myomers coupling), + frontmatter. Graph validates clean. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
16af8dbffb |
context: correct 0xBD3 — it's the damage/explosion hub (0x434), NOT the valve/Myomers gate
Risk-4 investigation (before wiring WAVE 8) found my earlier 'keystone unblocks 4 things' claim was wrong. Verified from the binary: - 0xBD3 SubsystemMessageManager = a damage/explosion consolidation hub (ConsolidateAndSendDamage, weaponExplosions), cached to Mech[0x10d]=0x434, mislabeled 'controlsMapper' in our recon (the live drive squats there; the real mapper is roster slot 0 via SetMappingSubsystem). - The valve MoveValve guard (FUN_004ac9c8 ->owner+0x190+0x274) AND the Myomers gate (FUN_004ad7d4 ->owner+0x190+0x260) read a DIFFERENT object at mech+0x190 (!= 0x434). So 0xBD3 does NOT gate the valve/Myomers/MessageBoard; mech+0x190 (unidentified, no decompiled writer yet) is the real keystone for those gauge-adjacent routes. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
1cd57ade85 |
context-system: bootstrap the progressive-context expert knowledge base (foundation)
Adapt the spark-lesson / expert-seed.md progressive-context pattern to the bt411 port:
a thin router + context/*.md knowledge graph so the 2236-line CLAUDE.md's deep knowledge
loads on-demand instead of every session.
NON-DESTRUCTIVE foundation pass (live CLAUDE.md unchanged; proposed router is a draft):
- reference/glossary.yaml -- ~45 terms (engine/formats/scene/reconstruction)
- context/decomp-reference.md -- the quantitative hub: resource types, ClassID map,
mech offsets, damage delivery, weapon constants, env gates, tools
- context/reconstruction-gotchas.md -- the 12 systemic bug classes (conventions/DO-NOT hub)
- context/bgf-format.md -- geometry format + CONN/PCONN + LOD-sqrt3 + ramp shading
- context/gauges-hud.md -- the gauge/MFD system (the just-completed wave)
- context/open-questions.md -- deferred systems + get-from-Nick
- context/_ROUTER-DRAFT.md -- the proposed slim CLAUDE.md (identity, protocols,
quick-lookup, evidence tiers T0-T4, conventions, structure)
- phases/phase-01-context-restructure.md -- design + migration plan + status
docs/*.md ledgers stay as the DETAILED logs; context/*.md are the curated digests that
route into them. Remaining: ~10 topic files (project-overview, subsystems, combat-damage,
rendering, locomotion, wintesla-port, build-and-run, ...) then the CLAUDE.md swap.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|