2edde296714f0bc772b75e2127a939c885fcf9c5
239
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 arcattackandClaude Fable 5
|
2edde29671 |
Fix 1 (Gitea #12): disasm-exact ProjectileWeaponSimulation @004bbd04 + the dirty-bit sweep
Replace the RivetGun-modeled ProjectileWeaponSimulation body with the fully recovered binary machine (capstone disasm, every branch address-cited): - gate 1 @4bbd36: simulationState@0x40==1 (destroyed) || heatAlarm==FailureHeat || owner disabled -> recoil=rechargeRate + alarm 7 (was: simulationFlags==1) - gate 2 @4bbd71: bin alarm 2/3 or bin destroyed -> alarm 7 re-pinned per frame - Loaded @4bbec2: DENIED shots (viewFireEnable off / no owner target) blip SetLevel(4);SetLevel(2) and STAY LOADED, no ammo pull (the old FireWeapon early-returns under an unconditionally-cycling caller faked a full firing pip cycle -- the "missiles cycle but never launch" incident mechanic); the ammo pull is bin->FeedAmmo @4bbee6 in the CALLER; both updateModel|=1 marks (@4bbf05/@4bbf4c = ForceUpdate) bracket FireWeapon; recoil set @4bbf51 - Loading @4bbdd2: recoil bleeds ONLY here at electrical Ready and CLAMPS at 0 (it ran to -114 before); bin Loaded -> weapon Loaded - 7 @4bbe4d: binary-faithful roach motel (re-asserted unconditionally; recovery = ResetToInitialState only) - slot 17 @004b9c9c reconstructed as MechWeapon::ComputeOutputVoltage (rechargeLevel=(rechargeRate-recoil)/rechargeRate, Emitter overrides with @4ba738) and called from Loading/7 -- the launcher recharge dial ANIMATES (the old "authentically static" claim was wrong) FireWeapon bodies stripped to heat+spawn only per @004bcc60 (no view gate, no ConsumeRound, no recoil); ConsumeRound retired (not a binary method). Gotcha #20 sweep (all sites disasm-verified): simulationFlags|=0x1 == engine DelayWatchersFlag (audio watchers muted forever) removed everywhere -- projweap/mislanch fire marks, ProjectileWeapon::ResetToInitialState (@4bbb47 = updateModel|=1); Emitter::SetDirty retired and split per binary site into ForceUpdate() (@4bafaa/@4ba55d) vs ExecuteOnUpdate() (@4ba99a/@4ba943); Emitter fault gate GetFlags()==1 -> simulationState==1 (@4baab9). AmmoBin::GetAmmoState() accessor added (named-member read of ammoAlarm@0x1A8). BT_LOOK_TEST=<frame> scripted verify added (mech4.cpp): holds the rear-view button 300f on/300f off to drive viewFireEnable headlessly. Verified solo ARENA1 (bhk1, autofire): 54-60 [projectile] PUSH + impact smoke; look-back denial window = trigger pulses, state stays 2, zero launches, resumes on release; enemy (disabled) mech launchers pinned 7 + full recoil; STREAK-6 recharge dial sweeps across BT_SHOT frames; lasers fire throughout; zero gauge faults. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
63b168cb92 |
SeekVoltageGraph: full reconstruction -- the eng-page POWER graph + top-box eraser (Gitea #11)
The #10 audit's one WRONG: the port Execute was a bring-up no-op, so the emitter/myomer engineering pages never erased their top data box -> stale sibling-page ghosts on the shared Eng bit-plane (SYSTEM 10 PPC showing the Streak ammo box, etc). Full faithful widget landed: - btl4gau2: ctor/BecameActive/Execute/clear/ticks/cursor recovered from the capstone disasm of @004c6798/@004c6920/@004c6934/@004c6be4/@004c6c30/ @004c6c6c (Ghidra dropped every x87 arg). Plot: v=0..12000 step 1200, x=Round(response(v)*230), y=Round(v*(1/12000)*187) (ld80 @004c6bd0/@004c6d74 = exactly 1/12000); change-test samples the response at 12000V vs the 9999 activation sentinel; XOR op for tick/cursor move-by-redraw; destroyed branch centres edestryd.pcc and revives via own vtbl+0xC (BecameActive, slot 3 of PTR_0051a1fc -- vtable-dump verified). - The vtbl+0x3C sampler identified from the binary vtables: Emitter slot 15 @004bb42c = sqrt(P(v)/2.0e8), P @004bb3f4 = damageFraction*v^2*0.5* energyCoefficient; Myomers slot 15 @004b8f94 = sqrt(AvailableOutput(v)*3.6/ 350). FUN_004dd138 == sqrt (part_015.c:4026): myomers' fabs reading corrected, GetSpeedReading renamed SeekVoltageResponse. Port dispatch via complete-type bridges BTSeekVoltageSample/BTMyomersSeekSample + BTSubsystemDestroyed (databinding rule). - Emitter's AUTHENTIC attribute table recovered (binary @0x511dd4, ids 0x1D-0x25) and published: Laser*/Seek*/OutputVoltage@0x414 (currentLevel, RAW volts -- the live-cursor feed). Field renames per the table: 0x3F8 minSeekVoltageIndex / 0x3FC maxSeekVoltageIndex (static_assert-locked). The MechWeapon 0x1D OutputVoltage PORT ALIAS retired (binary table ends 0x1C; Find walks lowest-id-first, the alias shadowed the authentic row). PPC::DefaultData -> Emitter::GetAttributeIndex(). - mech4: BT_PRESET_HOLD=<n> (freeze the #9 preset cycler after n pulses) for steady-state pixel verification; BT_SEEK_LOG diag. Verified live (BLH, autofire): both #10 repro pairs held ghost-free for minutes (SYS09->SYS10 PPC, SYS02->SYS04 ERMed, SYS05->SYS06 Myomers); curves draw with live cursors; one replot per activation; quad panels/J-K-L/sec panel un-regressed. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
904c75aff9 |
Gitea #10 audit fixes: HUD attr table re-based (@5110b8, one-record shift) + BT_SHOT dock capture
- hud.hpp/hud.cpp/CLASSMAP.md: the binary HUD AttributePointers table starts at @5110b8 with a FULL id-3 FlickerRate record (the old transcription read it as a label and shifted every offset one slot). Re-based member names/offsets: rotationOfTorsoHorizontal@0x1DC (<- Torso+0x1D8 twist), limits@0x1E0/0x1E4, speed@0x1E8, rangeToTarget@0x1EC, @0x1F0 unbound, Visible@0x1F4 (init 1), Lock@0x1F8 (init 0), HotBoxVector P3D@0x1FC, ThreatVector P3D@0x208, CompassHeading Scalar@0x214 (= yaw euler[0] + twist, HudSimulation :5676). Cross-checked vs ctor @004b7f94 + HudSimulation @004b7830 (Lock rule writes @0x1F8 :5622/:5633; range default 1200 + 500 m/s slide @0x1EC). SetCompassHeading renamed SetThreatVector (@004b7810 writes @0x208 = the threat vector; no port caller). No behavioral change: the reticle feeds via port globals and the CFG never binds HUD attrs. Resolves the gauges-hud open question (Gitea #10 entry b). - L4VIDEO.cpp: BT_SHOT capture moved AFTER BTDrawGaugeInset -- the 2026-07-18 reorder had left it before the dock blit, so BT_DEV_GAUGES_DOCK screenshots silently omitted the gauge panel. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
6783619069 |
Gitea #9: the upper-MFD PRESET pages (3 MFDs x 5) live -- SetPresetMode
table re-decoded to the ModeMFD bits + desktop J/K/L page cycle
The preset system was unwired by ONE defect in the message layer: the
SetPresetMode @004d1b24 table @0051dbf0 had been transcribed from the
section dump as BIG-endian dwords ({0x1e,0x01000000} instead of
{0x1e,0x01}), so a preset press set a garbage high bit -- and for group 1
items 3-4 / group 2 items 0-2 stomped the LIVE NonMapping / Intercom /
ModeSecondary* bits -- while the real page bits never moved. Ground
truth (section_dump.txt:72901-72908, little-endian + BTL4MODE.HPP [T0]):
set = ModeMFD{1,2,3}{Quad,Eng1-4} = 1<<(group*5+item), bits 0-14, fully
disjoint from the #6 secondary trio (bits 18-20); group 2 is MFD3, NOT a
duplicate of the secondary views.
What the 15 presets show (l4gauge.cfg): group = the MFD (Mfd1 lower left
/ Mfd2 upper center / Mfd3 lower right), item 0 = the btquad.pcx Quad
overview (up to 4 vehicleSubSystems cluster panels), items 1-4 = the
full-screen engineering-detail pages (bteng.pcx + prepEngr screens
group*4+1..4 + the cluster eng children: GENERATOR SELECT A-D, POWER
graph, COOLING loop, DAMAGE, ammo). Empty screens are authored per mech
(Blackhawk: 3/11/12 empty).
Authentic dispatch (streamed "L4" .CTL EventMappings, BT_CTRLMAP_LOG
dump): each MFD owns the 8-button RIO bank around it, MODE-MASK-gated --
Mfd1 = 0x08-0x0F, Mfd2 = 0x20-0x27, Mfd3 = 0x00-0x07. Quad page ->
direct-select buttons for the POPULATED eng pages (mapper msgs
Aux1Eng1-4 0x4-0x7 / Aux2* 0x9-0xC / Aux3* 0xE-0x11); eng page -> one
back-to-Quad button (0x3/0x8/0xD) + per-subsystem controls. These
records already install and fire on desktop (btinput passes the live
manager mask), so the NUMPAD profile's 0x20-0x27 keys page MFD2
authentically.
Port wiring (the #6 pattern): keys J/K/L -> actions Mfd1/2/3Cycle ->
gBTPresetCycle -> L4MechControlsMapper::CyclePresetModeNow(group) -- a
documented desktop shim (24 mode-dependent pod buttons don't fit a
keyboard) that cycles Quad -> populated Eng pages -> Quad, visiting
exactly the pod-reachable set; the body is the authentic SetPresetMode.
Dev-composite: BTDrawGaugeSurfaces now draws the Eng1-3 planes at their
sibling cells and skips any mono plane whose channel is BlankColor,
honoring the mode-driven reconfigure (RemapGraphicsPort) -- each dev
cell shows the ACTIVE page like the pod monitor. This supersedes and
removes the 2026-07-12 GAUGREND "frozen-dial" scaffold (forced all 15
page bits active under BT_DEV_GAUGES; it pinned the shared Eng plane on
the highest screen and ate the page flips).
Pixel-verified (BT_PRESET_TEST + BT_DEV_GAUGES_DOCK + BT_SHOT,
Blackhawk): all three MFDs page Quad -> SYSTEM NN eng details -> back to
Quad in lockstep with the [mode] preset mask log; group 0 skips the
authored-empty screen 3, group 2 skips 11/12. Un-regressed: N display
cycle (0x450421->0x490421->0x510421, page bits intact), M control mode,
CONTROLS.MAP 52 bindings parse clean.
Diags: BT_MODE_LOG ([mode] preset), BT_PRESET_TEST=<frame>.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
1d6339b226 |
Gitea #6: secondary MFD Damage/Critical/Heat cycling -- reconstruct the
NotifyOfDisplayModeChange override (vtbl+0x4C @4d1ae4) + wire desktop 'N'
The secondary screen's schematic selector was mislabeled: @004d1ae4 (the
bits-18..20 ModeSecondary* mask swap) was reconstructed as a non-virtual
"SetControlMode" that nothing called, so the desktop stayed pinned on the
Damage view. The binary's L4 vtable @0051e440 pins the truth:
+0x48 = @004d1acc <- CycleControlModeMessageHandler (FUN_004afbe0):
forwards to the base RET no-op @004b048c. A BAS/MID/ADV
control-mode change never touches the secondary view
(empirically confirmed: BT_MODECYCLE_TEST cycles the CONTROL
MODE lamp, mask bits 18-20 unchanged, schematic stays ARMOR).
+0x4C = @004d1ae4 <- CycleDisplayModeMessageHandler (FUN_004afcac):
THE Damage/Critical/Heat selector, indexed by displayMode
(table @0051dbe4 = ModeSecondaryDamage/Critical/Heat).
Authentic pod inputs (streamed type-6 .CTL EventMappings, dumped via the
new BT_CTRLMAP_LOG EVENT records): secondary-panel button 0x15 -> msg
0x15 CycleDisplayMode (manual p13, the "'Mech status Info center" bottom
left of the secondary screen), button 0x18 -> msg 0x14 CycleControlMode
(manual p6, top right), 0x10/0x11 -> ZoomIn/Out. The DOS keyboard
fallbacks (Keypress 0x13d/0x13e = extended F3/F4) are dead under the
WinTesla VK map, hence the desktop pin.
Port wiring (the M/ModeCycle pattern): key N / pad RightThumb -> action
DisplayCycle -> gBTDisplayCycle -> CycleDisplayModeNow() -- the same body
the pod console button message drives. Both .MAP profiles + the
compiled-in default updated.
Verified live (docked gauges + BT_SHOT, BT_VIEWCYCLE_TEST): the sec
panel cycles ARMOR DAMAGE silhouette -> CRITICAL DAMAGE subsystem list
-> HEAT DAMAGE colored list, mask 0x450421 -> 0x490421 -> 0x510421; M
control-mode cycling un-regressed (BAS/MID/ADV lamp cycles, view pinned).
Diags: BT_MODE_LOG, BT_VIEWCYCLE_TEST=<frame>, BT_MODECYCLE_TEST=<frame>,
BT_CTRLMAP_LOG now dumps EVENT records. KB: gauges-hud secondary-view
section rewritten, CLASSMAP +0x48/+0x4C slots, decomp-reference env
gates, GAUGE_COMPOSITE phase-4 entry resolved.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
2ae9bd43ae |
Coolant Flush end-to-end (Gitea #7): InjectCoolant id-4 handler + drain + FLUSH.PFX cloud + 'H' key
The playtest report (sound plays, no gauge drop, no cloud) traced to the
Reservoir's InjectCoolant chain being dead in three places:
- The handler was never REGISTERED: the binary's Reservoir handler table
@0x50e680 has one entry {4, "InjectCoolant", @4aee70}; added
Reservoir::GetMessageHandlers + the press/release handler (press starts
the flush gated on coolantLevel@0x12C > 0 -- the old body misread +0x12C
as currentTemperature; release stops it; novice lockout via FUN_004ac9c8).
- Reservoir::InjectCoolant (@4aefa4, 1019 bytes) was an empty stub -- the
drain the coolant gauge reads. Reconstructed in full: work list =
condenser/weapon/heatable chains (+0x7cc/+0x7bc/+0x7ac, roster-walk
emulation with the binary's duplicate-visit weighting; HeatSink-filtered
[T2 guarded]) + the linked master sink; per sink with flowScale != 0 move
squirtMass x flowScale x dt (clamped to the tank / sink capacity) and
credit pendingHeat with the negative carried-heat delta capped at
sinkMass x reservoir startingTemperature -- the set%-biased flush of the
manual (p24), riding the existing heat model.
- Two latent ctor decode bugs surfaced and fixed: the master gate @4af408
(and @4aeb40 HeatWatcher, swept) reads the OWNER MECH's simulationFlags
(*(param_2+0x28)), not the resource's subsystemFlags (the misread left
the CoolantSimulation Performance unregistered); and the capacity scale
FILDs the bank's INTEGER HeatSinkCount ((float10)*(int*)(link+0x1d0)) --
the float reinterpret gave ~1e-44 -> a permanently empty tank.
Capacity = 0.05 x heatSinkCount x streamed CoolantCapacity (BLH: 6.0).
Visual: the binary's mode-1 coolant-effect renderable (FUN_00456a68, built
for classID 0xBC0 on "ReservoirState", part_014.c:5439; tick @part_007.c:
8780) starts psfx 19 = FLUSH.PFX ("Coolant flush", BTDPL.INI) when the
state changes to 1 -- BTSpawnFlushCloud (mech4.cpp) spawns it on the same
alarm edge as an attached emitter at torso height.
Input: new CONTROLS.MAP action "Flush" on 'H' (HELD; press+release both
dispatch, the held-button payload). Diags: BT_FLUSH_LOG, BT_FLUSH_TEST.
Verified live (FOGDAY): [flush] Reservoir level 6 -> 0.13 -> 0 over ~0.6 s
held (= the manual's 3-4 punches to empty), the coolant vertBar source
Reservoir/CoolantMass drains, and the bluish condensation cloud rises from
the mech (scratchpad/flush_cloud.png vs flush_before.png).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
d9ceddb12a |
Aim ray follows the torso elevation (the boresight leveling erased it)
Follow-through on the pitch fix: the view pitched but shots still flew level (user report). Cause: the task-#48 AIM BORESIGHT leveling in the eye's aim-camera publish (L4VIDRND) strips ALL pitch from the pick-ray direction -- correct for the TERRAIN body pitch it was built against, but it also erased the pilot's deliberate R/F elevation. Fix: mech4's per-frame eye compose publishes the torso elevation (gBTEyeElev); the publisher re-applies it onto the LEVELED forward (fwd = (cos e * level, sin e)) before building the basis -- terrain pitch stays stripped, the deliberate aim survives into BTGetAimRay. Sign matches the pixel-calibrated view compose (+ = up). Harness evidence: pinned-down elevation visibly pitches the chase eye into the terrain (the ray basis moves); a full headless aimed-kill could not be driven (the autofire gate needs a designated target and the random spawns wedged short of the truck row) -- aim-at-truck kill needs the human pass. Awaiting human verification (issue #8). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
b85afed925 |
Torso-elevation aim LIVE: R/F now pitches the view + aim ray (pitch was inert)
User + tester reports: pitch does not work. Root cause: the Torso sim integrated the R/F / stick-Y axis into currentElevation (authored limits and rates all correct) but NOTHING consumed it -- eyepointRotation's only writer was the look-state switch, so neither the cockpit view nor the aim ray (camera basis) ever pitched. Shots always flew level; low targets (trucks) were unhittable. Fix (faithful: the pod's stick-Y pitches the EYE; the torso geometry does not tilt): per-frame compose in the HUD tick -- eyepointRotation = EulerAngles(lookPitch + torsoElevation, lookYaw, 0); BTCommitLookState now stores its look component in gBTLookPitch/Yaw; new complete-type bridge BTGetTorsoElevation (torso.cpp, mirrors BTGetTorsoTwist). DPLEyeRenderable consumes it every frame, so the view and the boresight aim pitch together (crosshair stays screen-centred). Sign PIXEL-CALIBRATED via new diag BT_FORCE_ELEV=<-1..1> (pins the axis headless): screenshots confirm axis +1 (key R) = aim UP, -1 (F) = down. X still recenters. Awaiting human verification. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
6f6a39b8c9 |
Issue #3 (b)+(c): weapon damage reaches cultural icons -> full trkdead explosion + authored burn fire
(b) The 'tiny explosion' on the ram kill is AUTHORED: crunch res 31 = 'stephit'
(one video object, effect 1008 = ddam5 damage smoke) -- a step/ram squash is
small by design. The FULL explosion res 32 = 'trkdead' = psfx 15 dtrkboom
(fiery omni burst) + psfx 16 dtrkburn (the burning-wreck fire), reached by
WEAPON kills -- which the 1995 binary dispatches [T1]:
- MechWeapon::SendDamageMessage @004b9728 (part_013.c:6765) gates only
"target NOT derived from Mech@0x50bdb4 OR aimed zone set": a non-Mech
boresight target takes the zone=-1 damage UNCONDITIONALLY;
- Missile contact @004be078 dispatches at the struck solid's OWNER entity
with no class test at all.
Port wiring: Mech::WorldStructurePick returns the struck solid's owning entity
(BoxedSolid::GetOwningSimulation; TERRAIN.cpp:107/246 build every static solid
with its Terrain/CulturalIcon/Door entity as owner); the mech4 pick block
designates IT instead of the gBTTerrainEntity sentinel (sentinel = fallback);
the projectile contact path grew the non-mech damage-zoned else-branch
(@004be078 mirror, direct Dispatch). Plain terrain ignores the damage
(ENTITY.cpp:885 zone==-1 guard); an icon's handler maps -1 -> 0 and dies.
Truck armor is WeaponDamagePoints=1 (TRK.DMG): one laser = one dead truck.
(c) The burning fire is dtrkburn.pfx, authored INTO the death package (every
icon family carries 1016: trkdead/bigdead/meddead/msldead/twrdead). There is
NO looping BurningState fire in the binary: the damage-zone effect watcher
ctor @0042a984 has exactly one call site (the Mech ctor, part_012.c:10405), so
icon ExplosionTables are inert, and CulturalIcon has no Performance.
Documented as authentic -- nothing invented.
Verified live (BT_SHOT pixel capture): 26 laser kills, [cult] TakeDamage
type=3 -> DYING res=32 -> DPLIndependantEffect 1015+1016 at the icon origin;
frames show the orange dtrkboom fireball, dtrkburn flames on the fresh wreck,
and the rubble aftermath; ram harness re-run still fires crunch res 31.
Diags: BT_FIRE_AT_ICON (designate nearest ahead icon; live-icon census in
CULTURAL.cpp), BT_FX_TEST="1015,1016".
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
0bcba26213 |
KB: land the EXPERIENCE-LEVELS decode from glass-cockpit (Cyd)
Brings Cyd's experience-level / simulation-mode research onto master (the KB-decode portion of glass-cockpit 4e01e83; the bundled BT410 source manifest is left for the full glass-cockpit merge). - context/experience-levels.md (NEW): the egg per-pilot 'experience' field (novice/standard/veteran/expert) is the pod's SIMULATION-FIDELITY tier, decoded end-to-end. FUN_004c0bc8 reads btMission->experienceLevel(+0xe4) and fans it into the +0x25c/+0x260/+0x26c/+0x270/+0x274 flag block: +0x25c 'sim live' (novice lockout: jams/searchlight/powersub), +0x260 the HEAT-MODEL master switch (veteran+expert; FUN_004ad7d4), +0x274 raw level (FUN_004ac9c8 = ==0 novice predicate; the valve/advanced-cockpit lockout). 4.0->4.10 drift: the viewscreen hunting-aid gate is GONE in 4.10 (HUD reads none of these flags), and movement heat is veteran+expert not expert-only. - btplayer.cpp/.hpp: CORRECTED comments/labels -- the +0x25c..+0x274 block is seeded from btMission experienceLevel/advancedDamageOn, NOT the scenario role's returnFromDeath; the 'roleClassIndex/showKills' names are scoring-era mislabels. Code logic UNCHANGED (comment-only): the ctor still reads scenarioRole (STAND-IN, defaults 2 = veteran) pending the wiring task. - Corrections swept into gauges-hud.md (ROOKIE->novice lockout), open-questions.md (player+0x260/0x274 semantics now PINNED), pod-hardware.md, subsystems.md, decomp-reference.md; CLAUDE.md router row. No code-logic change -> no rebuild needed (comment + markdown only). The runtime wiring (seed from BTMission::ExperienceLevel()) remains TODO. Co-Authored-By: Cyd <cyd@falloutshelterarcade.com> Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
171c993147 |
HUD: missile/AC weapon pips blink on fire again -- read authentic WeaponState (attr 0x1C)
Reported: the reticle's missile pips no longer momentarily disappear when
firing. Traced it: the pip's 'loaded' flag has read MechWeapon::rechargeLevel
(>= 0.999) since the reticle Execute was recovered (task #37). That's a port
APPROXIMATION of the binary's authentic attr 0x1C (WeaponState @0x350). It
works for emitters -- rechargeLevel is charge-driven and tops off at 1.0 when
Loaded -- but projectile weapons (MissileLauncher/autocannon) never write
rechargeLevel (it's authentically static at 1.0; the recharge DIAL draws full
and never moves). So a missile pip's 'loaded' was permanently true and the pip
never blinked. NOT an audio regression -- it never worked in the port; the
audio wave (
|
||
|
CydandClaude Fable 5
|
122fb7bccb |
Fix the backtick crash (a /FORCE-hidden linkage bug) + backtick = view toggle
The crash (any typed key in a glass session; found via the backtick report): the merge-reconciliation stand-down declared extern BTRIODevicePresent at BLOCK scope inside the extern-C BTInputSuppressKey -- the declaration inherited C linkage, _BTRIODevicePresent went UNRESOLVED, and /FORCE bound the call to garbage (cdb: wild call into Sensor::DefaultData from LBE4ControlsManager::Execute's suppression check). The tolerated-LNK2019 batch hid the new unresolved external -- the exact CLAUDE.md /FORCE trap. Fix: the extern moved to file scope (C++ linkage); link verified clean of _BTRIODevicePresent. Backtick feature (per Cyd: backtick = 1st/3rd person): PadRIO edge-detects VK_OEM_3 in its poll (focus-guarded, message-path-free) and the mech4 view block consumes it beside the V action (which stands down with the binding engine in glass mode). Verified live: two real presses -> [view] COCKPIT eyepoint -> [view] external chase, game alive. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
CydandClaude Fable 5
|
1e6f5fd347 |
FE: the menu process applies NO platform profile -- the preset leak fix
Steam-host report ('no glass panel, plasma yes'): a direct btl4.exe start ran
the MENU under the DEV profile, whose putenv(L4CONTROLS=KEYBOARD) leaked into
the relaunched mission child -- the child's glass preset (sets-when-unset)
could then never select PAD: no PadRIO, no panel; the plasma appeared only
because DEV never touches L4PLASMA. Menu-mode is now detected FIRST and the
front-end process skips the profile putenvs entirely (profiles belong to game
processes); boot line reads 'MENU (front end -- no profile applied)'.
Verified: zero-arg start -> menu -> launch -> child boots GLASS, PadRIO up,
72-control panel present, plasma present.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
CydandClaude Fable 5
|
8cf2cc1f07 |
FE: the RP412 menu + lobby-room pattern; flat single-exe dist (per Cyd)
Menu (btl4fe, modeled on RP412 RP_L4/RPL4FE.cpp): full catalogs as always-visible clickable LISTS in three columns with friendly names -- 8 maps, the canonical 8 certified mechs, colors, times, weather, lengths, modes -- bright/dim green with a selection chevron, double-buffered paint, real EDIT controls for pilot name + LAN peers (green-on-black via WM_CTLCOLOREDIT), framed LAUNCH / HOST STEAM / JOIN STEAM buttons, and the loadout persisted across the per-mission relaunch (fe_last.ini, gitignored implicitly by *.ini? no -- plain file beside the eggs). ENTER/ESC kept. Lobby room (RP412 RPL4LOBBY look): pilot roster with loadouts (mech, color), framed L A U N C H M I S S I O N (owner) + LEAVE LOBBY buttons, clickable. Dist: FLAT layout (the RP412 convention) -- ONE btl4.exe entry point at the folder root beside the content tree (the shape TeslaConsole manages), DLLs + launchers at root, content flattened from git-tracked files. Verified: the staged flat tree boots the Mission Console zero-arg from its own root; the click-driven menu launches a full marshaled mission (row click -> length=60 in the egg, LAUNCH click -> ladder -> 41+ ticks, fe_last.ini written). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
CydandClaude Fable 5
|
f889e24ce0 |
Merge origin/master: the D1 relay/operator line + input remap meet the glass layer
33 master commits in (relay TCP/UDP + PySide6 operator console, CONTROLS.MAP +XInput binding engine, camera seats, torso pitch aim, sign fixes, the 1995 manual, version stamping, 18-mech certification). Conflicts: .gitignore + CLAUDE.md router rows (combined). SEMANTIC RECONCILIATION (the one real overlap): masters btinput binding engine (ungated, CONTROLS.MAP) and the glass PadRIO (gated, bindings.txt) would both read the keyboard/pad in a glass+PAD session. btinput now joins the stand-down convention: BTInputPoll yields (and BTInputSuppressKey claims NOTHING, so authentic hotkeys flow) when an operational cockpit device owns the input path -- BTRIODevicePresent, BT_KEY_BRIDGE force-override honored, forced harness exempt. One input system per mode: btinput on pod/dev desktops, PadRIO on glass. The mechmppr/mech4 bridge merges composed clean (masters negate-once sign fix inside our device-gated bridge). The D1 relay keeps its own raw sockets by design (an alternative LAN wire; Steam and relay are separate modes). Verified post-merge: all 3 configs build; glass boots with [input] binding engine standing down + PadRIO owning input (30 ticks); pod forced-walk speedDemand=61.501 with btinput ACTIVE; 2-node loopback MP full 31/31 mission, 76/76 ticks. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
ff5260ce98 |
Coolant-loop cross-check vs the 1995 manual: structure strongly faithful
Dumped each mech's subsystem->coolant-loop (BT_SPEC_LOG in mech4: walks the roster once, resolves each subsystem's linked-condenser number via BTCoolingLoopFrame) and diffed all 6 manual mechs' COOLANT LOOPS tables. RESULT -- the structure survives the 4.0->4.10 gap remarkably well: - BACKBONE identical on ALL 6: Generator A/B/C/D on loops 1/2/3/5, Sensors(our Avionics) on loop 2, Myomers on loop 5, LRMs on 1&3, autocannon on 4, big energy weapon on 6 -- exact match - weapon LOADOUT identical on 5 of 6 (Thor/Vulture/MadCat/Owens/ Blackhawk); Loki is the one full rework (4.0 PPCx2/AFC100/SRM6 -> 4.10 AFC50x2/ER Medium x2/SRM4) - the consistent 4.0->4.10 change is a small-laser REDISTRIBUTION: the 2 ER Small Lasers moved off the sensor/heavy loops onto the energy loops 4&6 (Thor/MadCat/Vulture); Owens near-perfect (loops 1&3 exact) - Loop 0 = correctly UNCOOLED infrastructure (condensers, reservoir, gyro, torso, HUD, ammo bins, ...) -- not a coolant loop CONCLUSION: the coolant-loop reconstruction is faithful; every diff is 4.0->4.10 balance tuning, not a bug. BT_SPEC_LOG retained. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
f4cf1e631a |
Spec cross-check vs the 1995 manual: reads CORRECT, numbers are 4.0-vs-4.10 drift
Audited our live streamed subsystem config against the manual's per-mech stat sheets (new BT_SPEC_LOG dump: torso speed/limits, heat-sink count, reservoir capacity, at subsystem ctor). RESULT: structure + semantics align perfectly; the tuning NUMBERS differ -- because the manual is Tesla 4.0 and our content is release 4.10. Point-release balance drift, NOT a reconstruction bug: - Owens + Blackhawk are the two fixed-torso mechs in BOTH (speed 0, limit ~0, torsoHorizontalEnabled=0); the other four twist-enabled -- our reads correctly identify every case - torso speed/limit + heat-sink count exist per-mech exactly as the manual documents; only the values were retuned 4.0->4.10 (e.g. torso speed MadCat 80->50, heat sinks Loki 38->15) - reservoir coolantCapacity reads a flat 20 = the coolant THERMAL capacity (game units), NOT the manual's per-mech 'liters' (a display/flavor quantity with no single subsystem field) -- different measures, not a bug CONCLUSION: do NOT retune content to the manual -- BTL4.RES is the authentic 4.10 shipping data; the 4.0 manual's numbers are an earlier pass. The manual CONFIRMS our structural fidelity. BT_SPEC_LOG retained for re-auditing. Follow-up (structural, less drift-prone): the per-mech coolant-loop weapon/generator assignments. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
cb82d8c1d0 |
Turn/twist/free-aim sign family: negate ONCE at the key bridge (user-verified)
User live-tested: 'if i push the left arrow the mech turns right' -- correct, and it invalidated my earlier screenshot-forensics 'D=right verified' claim (the yaw telemetry actually agreed with the user all along: D gave POSITIVE yaw = CCW = LEFT; the sim uses math convention, positive = counter-clockwise, for turn AND twist). On the pod the RIO Ranger owned the hardware sign; the desktop bridge now negates in ONE place per channel family: - key_turn = -gBTDrive.turn (forced/BT_GOTO harness demands stay sim-frame, un-negated) - stickPosition.x = -gBTTwistAxis (Standard/Veteran torso stick) - SetFreeAimSlew call-site negations REMOVED (the bridge negation now flows through; double-flip removed) Matches the manual (p8): 'pulling your joystick to the right torso twists your Mech to the right.' User verified live: arrows steer correctly (Blackhawk, basic mode) and MadCat torso twist is correct in middle mode. LESSON (recorded): large-rotation screenshot comparisons are AMBIGUOUS (both directions put 'new scenery at an edge'); trust tracked landmarks, numeric telemetry with an established convention, or the user's live observation. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
af80e62070 |
Fixed-torso free-aim left/right was reversed (tester report confirmed)
Field report: 'left/right is reversed'. Investigation with screenshot + numeric verification found it channel-specific: - A/D leg steering: CORRECT (D tap -> scenery slides left = turns right; verified via cockpit screenshots) - Torso TWIST (turning-torso mechs, e.g. MadCat): CORRECT all along (E -> currentTwist +0.27 = right -- consistent with weeks of validated play; an interim blanket negation that broke this is reverted) - Fixed-torso FREE-AIM slew (Blackhawk & friends): REVERSED -- E/right panned the view LEFT. The slew consumer pans opposite the twist convention; on the pod the RIO layer owned the hardware sign. Fix: negate stick_x ONLY at the two SetFreeAimSlew call sites (Standard + Veteran branches). Verified after fix: MadCat E -> currentTwist +0.270 (right); Blackhawk E -> view pans right. New BT_INPUT_LOG diags: [input] twist in/currentTwist (Standard branch) + mechYaw in the Basic elev line. Note for testers: the tester was almost certainly flying a fixed-torso mech -- 'reversed' reports should always record WHICH mech. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
1271d3bc76 |
Torso elevation (pitch aim) wired: the pod stick's Y axis lives
The mechs could always tilt their aim up/down -- Torso models the full vertical axis (currentElevation, rate, VerticalLimitTop/Bottom, recenter) and EVERY 1995 control mode routes stickPosition.y into Torso::SetAnalogElevationAxis -- but the desktop bridge hard-zeroed stick Y, so the axis was dead on a keyboard rig. The one pod control the remap left unwired. - btinput: JoystickY axis -> elevTarget/elevActive/elevAbsolute - mech4 shim: sElev integrator (same walk/spring model as the twist; X recenters pitch too via gBTElevRecenter) - mechmppr bridge: feeds stickPosition.y every bridged frame (the old unconditional zero removed); both mode branches covered - CONTROLS.MAP (+ numpad profile + compiled default): R/F = aim up/down, pad LeftStickY = elevation (was unused) - torso.hpp: CurrentElevation()/ElevationVelocity() accessors (diag) - [mppr] trace gains stickY (note: the trace reads AFTER the next frame's device push re-zeroes the stick -- input flows regardless) Verified live: R held -> torso elevation climbs at the authored rate and clamps at 0.349066 rad = exactly 20.0 deg (the Blackhawk's VerticalLimitTop); release holds the aim. The eyepoint correctly stays level -- pitch aims the GUNS and reads on the HUD's vertical elevation tape, as in the pod. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
4459262b9c |
Camera seat LIVE + Mech::PlayerLinkMessageHandler reconstructed (@0049f624)
The spectator/broadcast seat works end-to-end: a hostType=1 +
vehicle=camera pilot page boots a CameraShip whose 62-camera arena1
network loads from the BTL4.RES type-27 resource (the engine's
CreateStreamedCameraInstances existed all along -- the file probe falls
back to it), the BTCameraDirector locks onto the first live mech, and
the ship TRACKS it (sees=1, goal advancing) and CUTS between authored
camera positions (screenshot-verified: wide arena shot -> close
tracking shot).
The missing piece was the Mech override of PlayerLinkMessageHandler
(@0049f624), which the reconstruction never filled. The engine base
resolves mech->player; BT's override adds:
1. the REVERSE link player->playerVehicle = this on EVERY node
(replicants included) -- how the camera director and scoreboard
find a REMOTE player's mech; without it a spectator parks forever
('NO goal entity')
2. clears NonScoringPlayerFlag (0x4000 = bit 14): a pilot with a
vehicle is a SCORING player -- this admits REPLICATED players to
the ranking pass, so cross-node rank/score displays work
3. master only: seeds the heat bank's ambientTemperature (bank
@0x1d4) from the mission [mission] temperature= (BTMission+0xf4)
-- correcting the heat family's 'frozen 300' deviation note (it
was never frozen; THIS is the writer)
Bridge BTSetBankAmbientTemperature lives in heatfamily_reslice.cpp
(mech.cpp cannot include subsystem headers -- local-stub collision).
BT_CAM_LOG diagnostics: camera-network count, director pick + Players
group census, ship follow state, link dispatch/receive.
Verified live: 2-seat (mech + camera) relay session -- replicated
player shows +veh, director goal locked w/ 30s timer, ship tracking a
moving mech through camera cuts; standard 2-node mech smoke PASS
(un-regressed). Lesson re-learned: a 'clean' build filtered on 'error
C' missed a linker file-lock failure -- one whole test cycle ran
against a stale exe (the /FORCE gotcha's cousin; grep -i error, not
error C).
Remaining (task open): ranking-window overlay draw (L4VIDRND stubs),
operator-app camera-seat row, shot polish.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
17176058cc |
First 4-pod session VERIFIED + the EntityID-cast diagnostic trap
4 pods, relay-assigned seats, 4-pilot MP4.EGG (eggmodel-generated incl. callsign bitmaps): 4 distinct seats, full ladder, every node replicates all 3 foreign mechs (host-qualified [repl] sets are exact complements), 4 distinct spawn positions (no dropzone stacking), UDP at 4-pod fan-out (relay tx=3x rx, zero drops), all pods alive through the session. Per-host [net-rx] census symmetric: 36 NewDynamicEntity makes (mech + subsystem roster) from every host to every node. DIAGNOSTIC TRAP that cost a false bug-hunt: EntityID::operator int() returns localID ONLY, so the [repl] log's (long)GetEntityID() collapsed different hosts' mechs onto one number and read as 'missing replicants'. The log now streams the EntityID object (host:local via its operator<<). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Fable 5
|
fad962bec8 |
Version stamping: 4.11.<git commit count> (<hash>[+])
4.10 = the 1995 arcade release; 4.11 = the win32 reconstruction; the
build number is the git commit count -- monotonic, zero-maintenance,
and every exe pins to exact source via the short hash ('+' = built
from an uncommitted tree). tools/btversion.cmake regenerates
build/btversion.h on every build (write-if-changed, no rebuild churn);
the stamp shows in the boot banner (btl4.log head, replacing the stale
'v4.10' line) and the window title (incl. the MP node tag).
Verified: build stamps 4.11.311 (980c9cd+), banner + title correct on
a live boot.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
arcattackandClaude Fable 5
|
980c9cd7e5 |
Input remap: CONTROLS.MAP binding engine + XInput gamepad support
The pod's controls reach the game through the RIO serial board; on a
desktop that hardware is a keyboard shim of hardcoded GetAsyncKeyState
reads. New binding engine (game/reconstructed/btinput.cpp) maps PC keys
and an XInput pad onto the authentic channels through a user-editable
file (content/CONTROLS.MAP, community-suggested grammar, corrected):
key/pad -> button <addr> real buttonGroup emissions, mirroring the
RIO convention exactly (press a+1 w/ mode
mask saved, release -a-1 w/ saved mask;
L4CTRL.cpp:2470-2520) -- aux/preset banks,
hotbox, panic, reverse thrust all reachable
key/pad -> axis Throttle rate (lever), pedals/JoystickX
deflect (turn/twist) into the existing
virtual-controls integrators (feel, gait
detent, spring-centering all unchanged)
keypad pilot|external <n> keyboardGroup key values ('0'-'F')
pckey <char> any authentic 1995 typed hotkey
action <name> port dev controls (view, all-stop, ...)
Keys claimed by a binding are SUPPRESSED from the legacy WM_CHAR/KEYUP
feed -- ends the historic double-dispatch ('w' drove AND selected pilot
0; F5's key-up value 0x74 aliased to the 't' hotkey; letter key-ups fed
the developer fake-event dispatcher). Unbound keys keep their authentic
meaning. The dual-use 'V' is split: V = view toggle, B = look behind.
Default profile = WASD classic (compiled-in twin; delete the file to
restore). CONTROLS_NUMPAD.MAP ships the corrected community layout
(keypads are NOT buttons 0x50-0x6F -- that space doesn't exist; no
clickable cockpit exists so everything needs a binding; keyboard fire
buttons added; 0x36/0x37 are hotbox not 'config'; missiles moved off
Ctrl). XInput loads dynamically (1_4 -> 9_1_0), disconnected-pad
probing rate-limited; pad sticks write the axes as absolute positions
(the spring is physical), triggers/buttons per the file.
Verified live: bindings load (43), W and NumPad8 drive (speedDemand 0 ->
61.5), X all-stop (spd -> 0), aux-bank emission (D1 -> [input] 0x2f
PRESS/release under the numpad profile), suppression both directions
(posted 'r' reaches [keych], posted 'w' swallowed), full-keyspace
WM_CHAR+WM_KEYUP fuzz x3 survived with sim advancing, XInput graceful
with no pad, 2-node relay session un-regressed (full ladder + UDP).
Pad-in-hand testing still needs a physical controller.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
|
||
|
CydandClaude Fable 5
|
f703bb1d56 |
Steam: the lobby + IDENTITY-TOKEN roster -- internet MP code-complete (step 4c)
NEW gated (BT_STEAM) game/glass/btl4lobby: an ISteamMatchmaking room replacing the arcade Site-Management screen -- host creates (lobby data btl4=1), members join by filter, pilots publish name/mech/color, the host ENTER mints the roster and signals GO. THE FAKEIP LESSON (live-verified, prior-art assumption DISPROVEN): a fresh process gets a DIFFERENT FakeIP, so menu-time fake addresses go stale by mission time -- the first cycle timed out connecting to its own stale address. Redesign: roster addresses are opaque ipv4-shaped TOKENS (169.254.77.N with ports 1501/1502) minted by the host at GO, mapped to Steam IDENTITIES; connections ride ConnectP2P(identity, channel) with console=0/game=1 virtual ports; the map reaches mission processes via env (BT_FE_MYFAKE + BT_FE_STEAMMAP); the GetMyAddress seam feeds the pod its own token for roster self-match; CheckSocket reports peers by token. L4STEAMNET reworked (no FakeIP allocation at all); the marshal gained the Steam-wire branch. Verified single-machine (ON/ON, live Steam): menu -> HOST STEAM LOBBY -> room -> GO -> token map minted -> egg roster carries the token -> mission process up with 1 roster token incl. self -> pod self-matches -> stock console ladder -> mission RUNS (46 ticks). Remaining: the live 2-account cross-machine session (docs/STEAM_TEST.md). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
CydandClaude Fable 5
|
48ede2f7d7 |
Net: the Steam transport -- FakeIP + SDR behind the wire seam (step 4b)
NEW gated (BT_STEAM) TU L4STEAMNET: ISteamNetworkingSockets with FakeIP -- pseudo-SOCKET handles (0x5EA0xxxx) behind the L4NET BTNet* seam; the engine TCP byte stream rides reliable-NoNagle Steam messages re-assembled into per-connection rings (nonblocking recv semantics preserved: empty -> WSAEWOULDBLOCK, peer-closed -> 0); two FakeIP ports mirror the arcade console/game channel convention; listen sockets + accept queues via the global status-changed callback; graceful degrade to Winsock at every step. Seam completions in L4NET.CPP: CheckSocket reports a pseudo-socket peer as its FAKE ipv4:port (the lobby egg roster matches unchanged); OpenConnection TCP_OPEN delegates FakeIP targets to BTSteamNet_Connect. WinMain installs on BT_STEAM_NET=1 (lobby launch path / by hand). CMake: gated SDK include/ lib/dll-copy. Both pumps (SteamAPI_RunCallbacks + sockets RunCallbacks) drive it -- the FakeIP result rides the GENERAL dispatch (first attempt with only the sockets pump timed out). Verified live (ON/ON build, Steam client running): SteamAPI_Init OK, steam_appid.txt(480) auto-written, FakeIP allocated (169.254.36.58, console 54464 / game 54465); without BT_STEAM_NET or without Steam the game stays pure Winsock. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
CydandClaude Fable 5
|
c4ca87b808 |
Miniconsole: the front end + LocalConsole marshal -- self-launched missions (step 3)
NEW gated dir game/glass/: btl4fe (green-on-black GDI catalog menu -- map/ time/weather/length/mech/color/pilot/mode/port/peers; egg writer emitting the FULL console egg shape, golden-tested vs MP.EGG: identical section sequence at identical line offsets, the 4 static ordinal pages verbatim, GDI-rendered 128x32/64x16 pilot-name plasma bitmaps in MP.EGG framing) and btl4console (the marshal: a worker-thread console CLIENT speaking the btconsole.py wire protocol verbatim -- 1040-byte chunked egg, 20s settle, RunMission x2, STAY CONNECTED, own the clock, StopMission at expiry; logs marshal.log). The engine sees a real connected console and runs the 100% stock ladder -- NO engine hooks (less invasive than planned: the L4APP.H setters proved unnecessary; launches go through real argv on relaunch). WinMain (one gated block): zero-mission-arg glass launch -> menu -> relaunch self with the mission argv (per-mission process relaunch; BT_FE_* env arms the marshal); post-RunMissions BT_FE_LOOP tail returns to the menu. Menu relaunches CLEAR the BT_FE_* handoff (found live: the inherited env re-armed a marshal instead of showing the menu). Verified end-to-end (synthetic menu drive): menu -> frontend.egg -> relaunch -> marshal feeds self over loopback -> stock console ladder -> mission RUNS (58+ ticks) -> 60s clock -> StopMission -> clean menu return, no env leak. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
CydandClaude Fable 5
|
418acf07e4 |
Panel: the vRIO layout + coloration, plasma flip fix, button-trap guard
Per Cyd: the on-screen panel now mirrors vRIO (C:\VWE\vrio -- CockpitLayout.cs
+ PanelCanvas.cs, itself the RIOJoy profile-editor layout from the original
Win32 RIO mockup): five 4x2 MFD clusters (addresses descending), four 1x8
board columns (Throttle/Secondary/Screen/Joystick), the two 4x4 hex keypads
(0x50/0x60 -- cells emit real keypad KeyEvents: internal=pilot unit, external=
operator unit), physical names (Panic/Main/Hat*/Pinky...), vRIO colors: red
lamp cells + yellow Secondary/Screen + neutral-blue keypads, flash half-
periods 500/250/125ms, right-click latch (gold outline). 104 controls.
PlasmaWindow: the gauge renderer writes the 128x32 buffer TOP-DOWN -- the
bottom-up flip rendered the marquee upside down (user-reported); copy straight.
Button-trap guard (the
|
||
|
CydandClaude Fable 5
|
db9ac947f7 |
Displays: on-screen cockpit buttons + desktop plasma + the glass preset (steps 2d/2e)
NEW gated TUs: L4PADPANEL (GDI top-level window, all-W APIs: the pod button banks -- upper/lower aux, 12 secondary, specials/hat/handle, 63 buttons -- clickable via PadRIO::SetScreenButton with lamp-lit faces from GetLampState, 10 Hz repaint; created by the PadRIO ctor on BT_PAD_PANEL=1) and L4PLASMAWIN (PlasmaWindow : Video8BitBuffered -- the gauge renderer draws the 128x32 plasma into its pixelBuffer through the SAME code path as the serial device; Update() blits orange-on-black at L4PLASMASCALE, default x4). Gated seams: L4GREND.cpp L4PLASMA=SCREEN branch; btl4main.cpp -platform glass preset (PAD,KEYBOARD + BT_DEV_GAUGES + SCREEN plasma + panel; env always overrides; non-glass builds log+fall back to DEV); run.cmd glass token. MFD surfaces need NO new code: the existing dock-bottom / BT_DEV_GAUGES_WINDOW=1 / BT_DEV_GAUGES_DOCK=1 modes are the display story. Verified live: -platform glass boots GLASS profile, panel + plasma windows up, pad detected, dev gauges awake, mission loop clean. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
CydandClaude Fable 5
|
9f35a8034a |
Controls: the keyboard bridges STAND DOWN for a live device (step 2c)
New engine query BTRIODevicePresent() (L4CTRL.cpp, ungated -- pod-correct for the serial RIO too): device exists AND IsOperational(). Both dev input bridges -- the mech4.cpp mapper-attr writes and the mechmppr.cpp BT_KEY_BRIDGE block -- now gate their WRITES on it: BT_KEY_BRIDGE unset = auto (bridge only when no device), 0 = force off (the documented pod setting, honored), else force on. The BT_FORCE_THROTTLE headless harness always rides the bridge. The mapper demand READ (turn = turnDemand) always runs. Verified live (glass build, PAD): OS-injected LSHIFT hold slews the PadRIO throttle 0 -> 0.33 -> 1.0 with pre==thr every frame -- the value arrives via the ENGINE push through the streamed .CTL binding, not the bridge -- and speedDemand=61.501 comes out of the authentic InterpretControls. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
CydandClaude Fable 5
|
b26e8205e3 |
Controls: the .CTL positional-id off-by-one -- CONFIRMED live and FIXED (step 2a)
The streamed L4 mapping resource carries the binary's positional attribute ids (stick=3, throttle=4) but MechControlsMapper chained from Subsystem::NextAttributeID == 2 -- every streamed record resolved ONE MEMBER LATE (attr 4 -> pedalsPosition, verified via the new permanent BT_CTRLMAP_LOG diagnostic in CreateStreamedMappings). A latent real-pod bug: the serial RIO throttle would drive the pedals member; the dev keyboard bridge masked it. Fix per the mechweap/mech attrPad idiom: ids pinned to the binary numbering, id-2 gap padded, static_assert-locked. Torso + weapon chains verified already aligned. Regression: BT_FORCE_THROTTLE headless walk clean (speedDemand=61.501 through authentic InterpretControls, gait cycles, no faults). Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
e2c21c4db2 |
Fix the tester 'buttons crash the game' report: two keyboard killers
Reproduced by full-keyboard fuzz (every WM_CHAR + WM_KEYUP posted to the game window, per-key liveness; delivery proven by the new BT_KEY_LOG [keych] trace). Two distinct issues: 1) '&' == Shift+7 is the engine's dev-console STOP-MISSION keystroke -- one shifted-key slip while hunting unmapped panel keys (MAP zoom '+' is Shift+'=') instantly ended the session, indistinguishable from a crash. Now env-gated (APP.cpp): default ignored with a log line; BT_KEY_STOP=1 restores the authentic stop (verified both ways live). Same hazard class as the arrow-release '&' alias already swallowed in L4CTRL.cpp:1516. 2) '\' (the developer fake-event key) was a REAL wild-jump crash: Entity::Dispatch STAMPS entityID/interestZoneID into the message at Entity::Message offsets (ENTITY.cpp:236), and the '\' case dispatched a bare Receiver-sized ReceiverDataMessageOf<ControlsButton> at the Mech -- the stamp wrote past the stack object and corrupted the frame (cdb: call to eip=1 out of Receiver::Receive). The 1995 binary does the identical overwrite and survived on stack-layout luck. Fixed with Entity::Message-sized placement-new backing (btl4mppr.cpp); the only such call site (grep-verified). Verified: full fuzz (95 chars + F-keys + letter/digit keyups, 118 keys delivered) survives end-to-end; '&' stops cleanly under BT_KEY_STOP=1. KB: reconstruction-gotchas.md gains gotcha 19 (Entity::Dispatch message stamping) + the '&' note. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
1ed8b05160 |
Radar view-wedge tracks the torso twist (Gitea issue #1)
The SECTOR radar's view cone read viewHorizontalRotation, wired by the MapDisplay ctor from the mech's Torso -- but FindSubObject and GetHorizontalRotation were NULL stubs, so the connection was never created and the wedge sat at heading 0 regardless of twist. Reconstructed from the binary: - FindSubObject (FUN_0041f98c): a subsystem-ROSTER walk (count @+0x124, array @+0x128) matching the streamed subsystem name (sub+0xd4) with a tolower-strcmp (FUN_004d4b58) -- the 'Torso' sub-object IS the roster Torso subsystem. - GetHorizontalRotation: torso+0x1D8 == Torso::currentTwist (layout-locked), via the existing task-#56 bridge BTGetTorsoTwistAddr (Radian is layout- identical to Scalar). Verified live (MadCat, Standard mode Q/E): the wedge tracks the twist in lockstep (rot 0 -> -2.21 rad), and the semantic test passes -- body turned away, torso twisted back onto the enemy: reticle green + wedge pointing at the enemy's blip on the body-fixed scope. NB the Blackhawk's torso is FIXED (+/-0.01 deg limits) -- its wedge authentically never moves; test with a twisting mech. Diag env: BT_RADAR_LOG. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
63250aee41 |
Fix two Jul-16 regressions: BT_DEV_GAUGES crash + -net dead controls mapper
Both surfaced today (dormant ~1 day) the moment the pod launch flags
(BT_DEV_GAUGES=1 BT_START_INSIDE=1, tools/mp_launch.sh) were used to drive in
multiplayer -- which made the same-day paint change look guilty. Confirmed on
the pre-paint build too; the trigger was the Jul-16 audio attribute work.
1) BT_DEV_GAUGES crash (cdb: CoolingLoopConnection::Update, ~15s in as the gauge
builds lazily). The dev-gauge cooling-loop lamp reached the cooling master by
RAW attribute index -- GetAttributePointer(3) + *(master+0x1d4). The audio
commits (
|
||
|
arcattackandClaude Fable 5
|
e0474ff92a |
Per-pilot mech paint: wire the color/badge/patch substitution end-to-end
- Mech::resourceNameA/B/C -> real CString members (the binary's 16-byte CStringRepresentation; deep-copy bind from the MakeMessage = FUN_00402a98, implicit member dtors) + paint-name accessors - SetupMaterialSubstitutionList reads the real egg names ([paint] log); TearDown clears the callback first (FUN_004d11e8) - dpl_SetMaterialNameCallback is real now (L4VIDEO registry); bgfload MaterialResolver::resolve() applies it to every material name -- the port analogue of the dpl board rewriting names at load - MP_BHMC.EGG: color=Red -> Crimson (vehicletable has no Red; binary Fail()ed) Verified live 2-node MP: crimson MadCat with hip hazard stripes + yellow VGL leg emblems; white Blackhawk + emblems; replicants painted on both nodes. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
ebdfa40d95 |
HUD (task #68 follow-up): authentic reticle pip GROUPS -- front vs rear
The binary reticle registration resolves each weapon's RearFiring attribute and registers its pip in group 1 (front) or 2 (rear) (part_014.c:5429-5434) [T1]; the reticle draws the group selected by the mech's reticleElementMask low bits (= binary mech+0x390, driven by the weapon-update view switch part_013.c:5588-5595: forward |1&~2, look-back |2&~1). Port: BTBuildReticle passes the real group (was hardcoded 1 on the disproven "no BLH weapon is rear" belief); BTCommitLookState drives the mech's reticleElementMask low bits per view (mech4's HUD tick already publishes them as gBTHudGroupMask, and the reticle Draw already filters on it). Resolves the user-reported "only 2 ERM dots but the mech has 3": ERMLaser_1 (front) and ERMLaser_2 (rear) both author pip position 1 -- with every pip drawn in one group the two red dots sat exactly on top of each other. Now: forward view = 5 pips (2 PPC + ERM_1 + 2 SRM), look-back = the 2 rear lasers' own group layout. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
38febae36b |
Rear-fire + look views (task #68): the pod's rear arsenal reconstructed
The user's tip ("some mechs actually do fire backward") checks out end to
end. Binary ground truth [T1]:
- weapon+0x334 (attr 0x1B "RearFiring"): the ctor tests the MOUNT SEGMENT's
page name for the marker 'b' (@0x511aa2, part_013.c:6913-6930) -- the back
gun ports sitelbgunport/siterbgunport. The old reading ("EXT in the
weapon model name") was a double misread (wrong string, wrong name).
- mech+0x410 (attr id 50 "RearFiring"; the old `stateFlags` label): the ctor
ORs every weapon's flag (part_012.c:10220) -- "carries a rear arsenal".
- The mapper's five-state LOOK machine (part_013.c:396-459): on a state
change it re-aims the eyepoint (mech+0x360 = EyepointRotation -- consumed
by DPLEyeRenderable, already live in the port) and re-arms each weapon's
viewFireEnable(+0x3E0): FORWARD view = the non-rear weapons, LOOK-BACK
(yaw pi + lookBackAngle pitch) = the REAR-mounted ones, side/down = none.
+0x3E0 is the same flag the emitter's Loaded->Firing gate reads (the old
`useConfiguredPip` label) -- pips and fire permission both follow the view.
Port: rearFiring derived from the mount segment name (BTWeaponMountIsRear);
mech rearFiring ORed in the roster pass (the old SubProxy::IsDerivedFrom
stub returned 0 -- that loop never ran; now bridged through
BTWeaponIsRearFiring, which also fixes the weaponRoster fill); the look
commit is LIVE (BTCommitLookState: eyepoint EulerAngles from the authored
per-mech look angles -- now real members, were Wword scratch parks -- +
per-weapon view enables); MissileLauncher/ProjectileWeapon FireWeapon gate
on viewFireEnable like the emitter; RearFiring attrs (mech + weapon) bind
real members. Keyboard: HOLD 'V' = the pod's rear-view button.
Live-verified on the default blackhawk: ERMLaser_2 -> siterbgunport rear=1,
ERMLaser_3 -> sitelbgunport rear=1, PPCs/SRMs/torso mounts forward -- the
blackhawk authors TWO REAR LASERS (owens also has back ports). [rearfire]
trace under BT_PROJ_LOG.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 4.8
|
ab6ea83e3b |
Missiles (task #67): launch through the WEAPON MOUNT frame -- the
backward-firing rack User report (madcat): missiles sometimes leave the mech BACKWARD; lasers always fine. Root cause: only missiles fly the authored MuzzleVelocity vector, and BTPushProjectile rotated it through the mech BODY basis (localToWorld) -- but the madcat's racks ride the TORSO. The muzzle POINT was segment-resolved (tracked the twist) while the launch DIRECTION followed the LEGS: twist the torso far enough and rounds left the back. Lasers/ACs aim straight at the designated pick (no launch vector) -- unaffected, exactly as observed. Binary ground truth [T1]: the fire builder FUN_004bcc60 spawns the missile with the FULL muzzle-segment frame (the real GetMuzzlePoint fills an AffineMatrix into the descriptor, :8762-8764), composes the authored MV with the z-NEGATION (:8759-8761 -- confirming the 2026-07-12 telemetry finding) onto the mech's own localVelocity (FUN_004b9cbc = owner+0x1c4), and the dumb seeker re-aims 100u ahead of the MISSILE's own frame each frame (0x4be9a0 disasm) -- the mount orientation IS the launch direction. Port: BTPushProjectile takes muzzle_seg and rotates the launch vector through the mount segment's world frame (segment-to-entity x localToWorld, the same matrix the muzzle point already used), keeping the z-negation convention, and inherits the shooter's world velocity; body-basis fallback for callers without a segment. All four call sites pass GetSegmentIndex(). Bonus decode banked for the full Missile-entity revival (KB-worthy): the three authentic performances -- Seeker 0x4be9a0 (aim = target-frame offset / 100u-ahead dumb + loft/lead 0x4beae4), Thruster 0x4be474 (quaternion-slerp BODY TURN toward the aim at turnRate deg/s), MoveAndCollide 0x4bef78 (velocity aerodynamically aligned to thrust via signed-square per-axis gains, ballistic droop as fuel burns, PROXIMITY FUSE on seeker rangeToTarget, max-range + altitude-floor retire). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
c51d64a6b8 |
Gyro tail + audio (task #66): the INSTABILITY MODEL -- mech+0x3F0 reconstructed
Byte-decoded the un-exported master-perf block @0x4aad3d-0x4aaf14 (capstone;
the same gap that held the F5 footstep code) [T1]:
instab = (min(|AccelerationLastFrame| / maxUnstableAcceleration, 1)
x unstableAccelerationEffect)^2
instab += clamp((demand - legCycleSpeed)/demand, <=1) # "gun the engine"
x unstableGunTheEngineEffect # (demand clamped to
# [gimpStride(neg), runMax2])
if (legAnimationState == 4 /*turn-in-place*/) instab += unstableStopedTurnEffect
clamp to 1 -> mech+0x3F0 -> gyro->swayBias (gyro+0x3A8)
Every piece resolves to already-reconstructed structure: the model-record
tuning block rec+0x80..0x94 (ctor copy @0x4a2593 -- the six authored
Unstable* fields, previously parked in the Wword scratch bank, now real
members); AccelerationLastFrame@0x82c = the snapshot of the ring-derived
localAcceleration (copied at the perf tail @0x4ab142); CurrentSpeed@0x348 =
legCycleSpeed; the trn state 4 gate; and the gyro feed lands in the
EXISTING swayBias member + GyroscopeSimulation consumer (task #56) --
GyroFrameJointWrite's "0.0f model TBD" argument is now the live value.
UnstablePercentage (binary id 52 @0x3F0) binds the real member: the LAST
dead audio attribute is live -- the authored instability alarm (start
thresh 0.01 + volume = the fraction) sounds under hard maneuvers, and the
cockpit ambient sway now scales with reckless driving.
Live verification (30s, 0.6-throttle run): instab 0.38 during the walk->run
chase (cyc 22.2 vs demand 33.6), settling to 0.002-0.12 per-stride ripple at
steady run; attribute binds with live float values; [instab] trace under
BT_GYRO_TRACE. unstableSuperStopEffect/unstableHighVelocityEffect writers
remain unlocated (plausibly the airborne perf variant) -- noted on members.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 4.8
|
a11a697824 |
Audio: footsteps arrive on the FIRST stride -- the 10-20 s warm-up bug
User report: footfalls silent for the first 10-20 s of every mission (all
mechs), then solid. Root cause was three interlocking layers, each measured
with timestamped traces:
1. The authored footstep volume chain (LocalAcceleration [0,10]->ctl100 +
LocalVelocity [0,0.6]->ctl101 through authored N=30/N=15
AudioControlSmoothers, fill 0) hangs off the SOURCE's watcher chain
(scale watches smoother watches mixer watches source), and an idle
source's chain executes only at Start attempts -- one smoother sample
per stride.
2. Each hop is frame-gated (AudioComponent::ExecuteWatchers,
DefaultAudioFrameDelay), so any burst collapses to one execution.
3. The transient drop gate (vol < 0.3, AUDREND) rejected every Start while
the smoother average crawled up 1/30th per attempt -> ~25 dropped strides
before the first audible step, then per-frame execution while playing
kept it warm forever ("solid after that").
Fixes (engine-level, each documented in place):
- AudioScaleOf<T>::Execute now sends EVERY poll (scales are continuous
value-feeders; the base bitwise change-gate -- Motion::operator== is
memcmp -- froze on our deterministic gait math, where the original's
noisy physics floats never bit-repeated. Triggers/matchers keep the
change gate: their semantics are edge-based).
- Component/AudioComponent::PrimeWatchers(passes): recursive, GATE-FREE
watcher pump; AUDREND runs 30 passes on every transient Start request so
the authored smoothers evaluate at their true steady state before the
drop gate reads the volume.
- localAcceleration derives via the binary's exact structure: 15-sample
ring buffers of the raw position derivative + dt (ctor part_012.c:9836,
derive :15169-15195), in the PerformAndWatch tail so it runs every frame.
- AttributeWatcherOf::GrabCurrentValue private -> protected (the scale
override calls it).
Verified (30 s walk from cold start): drops 25 -> 3 (the survivors are
authentic quiet-stride gating: first gentle strides at vol ~0.28 vs the 0.3
gate), footfalls deliver from the first stride, 43 delivered with live
per-stride gain variation. Diag traces added: [accwatch]/[fsscale]/
[smooth]/[smoothcfg]/[motionscalecfg] + timestamps on DROP/volset.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 4.8
|
0e2401fb52 |
Audio Phase 4d (AUDIO_FIDELITY F5): footStep is the authored CONTACT LEVEL
The binary's per-frame perf (disasm @0x4a9e80-0x4a9eb6 leg / @0x4aba86- 0x4abab9 body) computes footStep@0x394 = (jointlocal.y <= *footStepThreshold) with the threshold pointer = SequenceController+0x20 = &ANI hdr[2] -- the header word the engine's own AnimationInstance captures (JMOVER.cpp:1415) and our SelectSequence skipped. States 0/1 retain the value. Port: SelectSequence captures hdr[2]; PerformAndWatch evaluates the contact level per frame from the cached jointlocal root joint (leg channel drives the pose); the 150 ms clip-transition pulse + decay are RETIRED (steps fired at clip boundaries with a fixed width; clips whose root crosses twice or never counted wrong). Live verification (30s walk): the authored threshold decodes real (-0.232 root height); rootY oscillates across it per stride (-0.26 contact / -0.19 swing) with clean 0->1->0 transitions per leg state (5/6/7); 34 footfall deliveries at stride rate with per-stride varying gains. Also closes F23(2): the 17 authored AnimationState trigger states fire empirically -- the EngineShiftFwd/Rev heard during the gait dead-band hunt WERE states 10/11/14/15; the runtime clip numbering is correct. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
9dcb4752de |
Audio Phase 4c (AUDIO_FIDELITY F17/F19): impact scaling + the authored footstep feed
F17 CollisionSpeed (binary id 24 @0x4B4): real member captured as |worldLinearVelocity| when the contact accumulator arms (0->1) -- the authored AttackVolume [0.9,1] / Brightness [0.7,1] scales over impact speed [0,25] now make harder hits sound louder and brighter. ReduceButton (id 46 @0x340): real watchable member (the keyboard rig never presses it). UnstablePercentage stays deferred: its sway/overspeed model @0x3F0 is the known gyro-ledger gap (live writer unexported); binding without the model would be a stand-in. F19 footstep feed (the invention is dead, long live the authored chain): new [motionscalecfg/motiontrigcfg] traces recovered the authored configs -- EVERY motion watcher extracts |linearMotion| (motionValue=3); the footstep volume mixer is fed by LocalAcceleration [0,10] -> ctl100 (per-stride kick) + LocalVelocity [0,0.6] -> ctl101 (0.4 base while moving). The port never wrote Mover::localAcceleration, so ctl100 read 0 and the old mech2.cpp step-intensity broadcast (patch-sniffing, invented curve) fought the live authored scale. Now: localAcceleration.linear = d(published velocity)/dt -- EXACTLY the binary's derivation ((avgVel - prev)/avgDt into +0x1e4, part_012.c:15186-15195) -- and the broadcast is REMOVED. Regression (30s, walk throttle): stable; footfalls deliver through the wholly-authored chain with per-stride VARYING gains (0.61/0.72/0.62 -- real step dynamics, impossible under the old constant-curve invention). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
21378ec132 |
Audio Phase 4b (AUDIO_FIDELITY F16): the torso-twist servo whir -- Torso
publishes its real attribute table Recovered the binary Torso attribute table [T1]: dense ids 3..15 from MechSubsystem::NextAttributeID (HeatWatcher/PowerWatcher publish nothing -- binary parity), all 13 rows land on already-reconstructed members: RotationOfTorsoVertical/Horizontal @0x1E4/0x1D8, HorizontalLimitRight/Left @0x1DC/0x1E0, SpeedOfTorsoVertical/Horizontal @0x1EC/0x1E8 (the |rate| the binary abs's -- our derive already did), StickPosition @0x1F0, TorsoUp/Down/ Left/Right/Center @0x1F8..0x208, MotionState @0x20C (statusFlags; the binary writes 2 on the limit-hit frame -- the authored ==2 matcher is the twist-stop clunk, settling the audit's [T4] guess). Torso's AttributeIndex was default-constructed EMPTY -- TorsoTwistInt01/ Ext01/Stop01 were unreachable. Now the authored chain (pitch -200..+200 cents over twist speed 0.5..0.9, start/stop gate at 0.25, stop clunk on MotionState==2) drives them unchanged. Regression (25s): stable; all three bind real; **attrnull count = 0 -- every authored audio attribute in the game now binds a real member.** Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
cc2b109cc8 |
Audio Phase 4a (AUDIO_FIDELITY F6/F7): coolant-leak warning + missile alarm
F6 ReportLeak (the largest dead authored block -- 38 of 54 match watchers):
recovered the binary HeatSink attribute table (16-byte {id,name,off+1} rows
@0x50e438..0x50e4c8, ids 3..12) [T1] -- it confirms EVERY existing heat
binding (CurrentTemperature@0x114 .. CoolantMassLeakRate@0x130, HeatSink@
0x164) and adds the one row we never published: ReportLeak (id 12) ->
+0x138 = coolantActive, the INT leak hysteresis flag UpdateCoolant
(@004adbf8) drives 1/0 around draw 0.003/0.0025. PoweredSubsystem derives
from HeatSink, so the single row serves all 19 authored leak watchers
through the chained index, exactly like the binary. MechWeapon's pinned-id
pad absorbed the +1 chain shift (0x0E -> 0x0F, tripwire fired as designed).
F7 IncomingLock/DistanceToMissile (missile alarm): binary Mech table walked
in full (ids 21..56 [T1] -- also settles FootStep@0x394, CollisionSpeed@
0x4B4, UnstablePercentage@0x3F0, ReduceButton@0x340 for the next findings).
IncomingLock id 54 @0x3fc, DistanceToMissile id 56 @0x400; the old
"maxSpeed @0x400 = FLT_MAX" member was a MISREAD of the far default and is
retired (its 1000.0f "override" was RadarRange id 47 @0x404, already
published). Real members + accumulators: Missile::MoveAndCollide reports
target + range each tick (BTReportIncomingMissile bridge); PerformAndWatch
latches per frame. The authored beeper (match 1/0) + range->TEMPO scale
(100..800 -> 600..10, accelerating as the missile closes) read them
unchanged. Drive is intent-level [T3]; init 0/FLT_MAX matches the binary
reset (part_012.c:9446-9447).
Regression (30s): stable; ReportLeak binds real on every subsystem (0 pad
redirects); DistanceToMissile binds with FLT_MAX live; attrnull 41 -> 3.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 4.8
|
aa004eb7b8 |
Gait: keyboard detent snaps the lever out of the walk/run DEAD BAND + KB
Byte-decoded finding [T1]: the gait SM has no stable state for a demand in
(walkStrideLength@0x534, reverseSpeedMax@0x538). Cap semantics settled from
LoadLocomotionClips @0x4a80d4: 0x538 is the walk->run TRANSITION CLIP's exit
speed (the run ENGAGE threshold -- not a reverse max) and 0x34c (run-cycle avg
root speed) is the mapper's continuous demand multiplier (FUN_004afd10). The
finished-callbacks up-shift when tgt > 0x534 but enter/sustain run only when
tgt >= 0x538, so a demand parked between them (Blackhawk: 22.02-30.87 =
throttle 36-50%) hunts walk -> shift-up -> shift-down forever, firing the
authored EngineShiftFwd/Rev sounds each swing -- the user's repro, faithfully
reproduced by all-authentic logic + data. Likely masked on the pod by
MECHANICAL throttle-quadrant detents ("5 speeds" lore; the software path is
notch-free) [T4] -- added to get-from-Nick.
Accommodation (keyboard = our stand-in lever): at key REST, snap the lever to
the nearer dead-band edge (walk cap, or run engage + margin since the cont
check is >=). Sweeping THROUGH the band while held stays continuous -- an
authentic moving lever; the single shift it fires is the authentic shift.
BT_GAIT_TRACE logs [gaitdetent] snaps.
KB: locomotion.md gait-dead-band section, pod-hardware.md mechanical-notch
hypothesis, open-questions.md Nick item.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|
||
|
arcattackandClaude Opus 4.8
|
537749cae3 |
KB: audio fidelity Phase 1+2 settled facts -> context/wintesla-port.md
wPreset patch numbering, SF2 v1.0 pitch generators + EMU8000 44100 base rate + the WAV bake formula, inverted SBK attenuation, full-zone/key-select/loop- region/release-fade architecture, distance/gain/doppler model, the audio-clock origin (FUN_0044e19c = ApplicationManager::GetFrameRate; frames were clock ticks), and the ConfigureActivePress base-attribute resolution. Annotated the mech4.cpp velocity smoothing as AUTHENTIC [T1] (binary Mech::Execute AverageOf filters, part_012.c:15169-15179). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
691e88569a |
Audio Phase 2 (AUDIO_FIDELITY F1/F2/F13/F14): full-zone soundbank -- key-splits,
layers, baked tuning, loop regions, release fades Extractor rewrite (tools/sf2extract.py): every sample-bearing instrument zone becomes a SAMPLEINFO slot -- 603 zones / 241 presets (68/115 + 94/126 multi- zone, matching the audit exactly). Per zone: keyRange(43), sampleModes(54), SBK samplePitch(55) + rootKey(58) + coarse/fineTune(51/52), attenuation(48, INVERTED SBK scale, 0.375 dB/step [T3], baked into the PCM), releaseVolEnv(38), pan(17), shdr loop region. F2 pitch (algebraically exact): WAV rate = round(44100 * 2^(((6000 - rootCents) + tune)/1200)) -- EMU8000 v1 base 44100. Cross-checks: FootFall 17300 Hz (the audit's +4.2 st), MissileLoaded low zone 88200 (-24 st), Warnings01 8-way klaxon split w/ 3 looped zones, Death01 162 Hz extremes. F1 zone selection: SetupPatch/PlayNote take the authored note; attach/play only zones whose [keyLo,keyHi] contains it (detach the rest so a rewound source can't replay a stale buffer). Live-verified: LaserLoaded/ MissileLoaded note 36 -> low clunk zone, note 84 -> high blip zone (pitch 4); LaserCFire plays all 3 authored layers incl the looping sustain. Stereo-pair zones pan via listener-relative AL_POSITION (distance model is AL_NONE). MAX_PRESET_SAMPLES=25 (AllExplosion); fixed PRESET_isImplemented's >=5 bound. F13 loops + releases: authored [loopStart,loopEnd] applied via AL_SOFT_loop_points at buffer load (0 rejections; kills the latent boom-loop on MechExplosion's 1.5% sustain slice + the ~2.4 Hz LaserBSustain wrap tick); StopNote now honors the authored releaseVolEnv (1.1-3.9 s on ~20 looping presets) with a dB-linear fade serviced from AudioHead::Execute; restarts reclaim fading sources. One-shots keep the instant stop (faithful). Regression (40s drive+fire): stable, loop points accepted, key-splits + layers verified in the delivery trace, chirp still dead, footfalls fire. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
fc7f311771 |
Audio Phase 1 (AUDIO_FIDELITY F3/F4/F10/F15/F18/F20 + KB): the quick wins
F3 distance: alDistanceModel(AL_NONE); restored the commented authored distance multiply in Dynamic3D::CalculateSourceVolumeScale, added the same override to Static3D, dropped the (now inert) AL_MAX_DISTANCE writes. Far battle audio follows the authored knee/rolloff curve again, and the volume cull / voice steal / ducking chains are distance-aware. F4 volume law: AL_GAIN = volume_scale^2 at all 3 per-frame sites (Direct/ Dyn3D/Static3D) -- the GM CC7 squared curve; linear was ~+6 dB at mids. F10 doppler: alDopplerFactor(0) (AL's model ran wrong constants + sign- inverted velocity: approaching sources pitched DOWN); the AUTHORED dopplerCents (AUDIO.INI range/speed-of-sound model, decomp-proven consumer part_008.c:7466) now adds into the Dynamic3D pitch chain. F15 ConfigureActivePress: published at the MechSubsystem BASE (binary id 2, descriptor @0x50de5c -> +0x110); renamed the misnamed vitalSubsystemIndex member (the weapon ConfigureMappables handler already drives it 0/-1). Removed the invented Sensor/Myomers duplicates and RESTORED their byte- exact layouts (0x328/0x358 allocs + asserts). MechWeapon's pinned-id pad absorbed the +1 chain shift -- which matches the binary's own numbering. F18 cook-off warning: AmmoBin FireCountdownStarted -> the existing cookOffArmed @0x18C (binary table @0x512600); the countdown klaxon can fire. F20 zoom blip: L4MechControlsMapper publishes TargetRangeExponent -> the live @0x1a4 zoom member (own table chained to MechControlsMapper). KB: replaced the bogus divisionParameters+0x10 rate read with SystemClock::GetTicksPerSecond() (FUN_0044e19c is GetFrameRate -- original audio frames were CLOCK TICKS). Regression (35s drive+fire): stable; ConfigureActivePress binds real on all 9 subsystems (idle -1, zero pad redirects); FireCountdownStarted + TargetRangeExponent bind live members; attrnull 53 -> 41; chirp still dead; footfalls still fire (gain now correctly squared). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
c68307ad53 |
Audio: kill the per-footfall static -- smooth the PUBLISHED velocity (task #50)
User pinpointed it: the per-stride 'static' was NOT the footstep sample -- it was the ambient engine hum being interrupted in time with the footfalls. Diagnosis (live tape): EnginePower01 was caught in a rapid Play->Stop cycle (80x/session). The idle-hum is gated by authored LocalVelocity triggers (hum ON in speed [1,20], OFF above 20) -- and the port's localVelocity is a RAW per-frame position derivative that pulses with every stride (gait acceleration + ground-snap bob). At walking speed |v| straddles the 20 band edge, so the trigger Start/Stop-flapped the hum on every foot plant; at run |v| >> 20 keeps it off (matching 'goes away at higher speeds'). Fix: ~0.25s exponential filter on the PUBLISHED localVelocity.linearMotion (fwd + vertical) -- kills the stride ripple, tracks real speed changes within a couple strides. The physics worldLinearVelocity (StaticBounce, collision damage pricing) is untouched; update records + the impact gate get the smoother value (both benefit). VERIFIED: EnginePower 1 play / 0 stops for the whole run (was 80 stop-cycles); FootFall cycles normally per stride; gear shifts/windup lifecycle intact. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
arcattackandClaude Opus 4.8
|
be626c71ce |
Audio: KILL THE CHIRP -- ConfigureActivePress backed real (idle -1) on Sensor+Myomers (task #50)
The obnoxious always-on clicking was the cockpit CONFIGURE-MODE ticker: an
authored looped sequence gated by an AudioIntegerTrigger with threshold -1 on
<subsystem>.ConfigureActivePress (the held-configure-button index; -1 = none).
The attribute was one of the inert-pad redirects -- the pad reads 0 = "button 0
held forever" -> the ticker Start-fired at load and pulsed 2.7/s eternally.
Found via [sendcfg]/[seqstart] traces: the first seq start immediately follows
the trigcfg(thresh=-1, onID=Start) construction on the pad address.
Fix: real int configureActivePress = -1 APPENDED to Sensor ("Avionics") and
Myomers, registered in their attribute tables. Both classes are byte-exact
factory allocs, so the sizeof locks AND the placement-new alloc constants are
bumped TOGETHER (Sensor 0x328->0x32C, Myomers 0x358->0x35C) -- the tripwire
caught a mid-layout insert (seekVoltage@0x330 shift) and a fixed-alloc overrun
before they shipped; member moved to the true tail. Wiring the live value
(EnterConfiguration/ExitConfiguration sets/clears the index) restores the
authored hold-to-configure tick later; idle -1 is the correct silent state.
VERIFIED: ProgramButton01 plays ZERO times (was the 2.7/s chirp);
ConfigureActivePress binds real (vtbl=FFFFFFFF = the -1); FootFallInt at 0.98
gain; stable.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
|