Version string, zip name and README. This one is about the screen:
the cockpit scales both ways and re-fits on resize keeping 16:9, -fit
runs it borderless over the monitor at a matched render size, the six
secondary displays are the players to scale and the radar to place,
and the button banks reach under the glass.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
L4VB16.h carries GlassSize and CockpitGlassSizes, which L4VB16.cpp uses
in both the constructor and LayoutCockpit - 8dc6605 left it behind (the
add named the path in the wrong case), so that commit does not build on
its own.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Button banks
The exploded diagnostic view was still display-only - it predates the
button work - so it now builds the same banks as the cockpit, with
the pod arrangement laid out from the panes measured sizes rather
than a hardcoded 640/480 grid (the banks make each window bigger than
its glass, and the bottom row hung off the work area otherwise).
The map side columns were spread height/6 from the top, but the maps
own legend grid is not sixths: measured off the bitmap it starts 13
rows down with six 102-tall cells on a 105 pitch. Every button sat
high of its label, worst at the bottom. Each buttons top and bottom
now come off that grid separately and are subtracted - scaling a
height directly would let rounding drift them back out of step on a
resized cockpit.
Depth 100 to 240: against the 480 glass the two banks meet in the
middle bar the strips, so practically the whole display is a press
target. This mattered most in the cockpit, where the panes are small
enough that the halfway clamp governs - at 100 the MFDs had a 110px
dead band straight through the middle of the glass.
-fit (also spelled -windowed-fullscreen)
Borderless over the whole monitor, with the render size chosen to
match. The cockpit presents the 3D into a viewscreen that fills its
canvas, so the right -res is that canvas at the scale the cockpit
will settle on; computing it with identical arithmetic makes the
stretch a copy. On the 3440x1440 panel that is 133% and -res 2553
1436, against 125% for the windowed path that pays for the taskbar.
The pick runs after the whole command line, so an explicit -res wins
from either side of -fit. Capped at 3840x2160. Cockpit mode only -
mode 0 has to stay playable on real pod hardware and mode 2 is a dev
view - so those get the resolution and keep their windows.
Display layout, in environ.ini
L4MFDSCALE sizes all five MFDs, L4MFDSCALE_UL and friends override
any one of them, L4RADARSCALE the radar, and L4RADARPOS puts the
radar bottom centre, in either bottom corner, or halfway up either
side. Scaling is applied in canvas units before the canvas is fitted
to the window, so a number means the same thing on every monitor.
Sizing each display separately let the clamps become exact rather
than one conservative rule for all five: what limits a display is its
actual neighbour. Which neighbour that is depends on the radar, so
the clamps follow it - on the bottom edge it clears the one MFD above
its column, but centred on a side it has one above AND below and
grows from the middle both ways, so it must clear the taller twice
over. Clamping shrinks uniformly; these are photographs of real
instruments and a one-axis clamp would squash them.
Verified on the ultrawide: all five radar positions, per-display and
group scaling with the clamps biting, -fit with and without an explicit
-res, and the button geometry measured back off the screen.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The canvas was capped at 100%, so a bigger monitor got a 1920x1080
cockpit in the corner of the screen and maximising did nothing - the
layout only ran once at startup.
Now the fit is one uniform scale with no ceiling, recomputed whenever
the window changes size (maximise, restore, drag), and the canvas is
centred in whatever client area it gets. Uniform scale is what locks
the aspect: a wider-than-16:9 desktop letterboxes with even black bars
instead of stretching the cockpit. Panes gained Resize() so the glass
and its button banks re-scale with the canvas; the pixel buffers keep
their native source resolution.
Scaling up is free quality on the MFDs - their glass is a downscale of
a native 640x480 channel until about 200%.
Verified on the 3440x1392 ultrawide: opens at 125% (2400x1350) instead
of 100%, maximises to 126% centred with even bars, a 1884x661 window
fits 61% letterboxed left/right, 1084x961 fits 56% letterboxed top/
bottom, and a 2584x1461 client scales up to 134%.
The 3D still renders at -res and D3D stretches it to the canvas, so
raise -res to match a large screen for 1:1 pixels; start-windowed.bat
and the README say so.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The amber Secondary/Screen columns get the same treatment as the red
MFD banks, turned on its side: each button reaches 100px in behind the
map with a 10px indicator clearing the edge, so the lamp reads as a
slim column and the radar picture is the click target. The shared
buttonDepth/indicatorStrip constants now drive both banks, and the
columns are clamped so they can never meet behind a narrow map.
The map pane narrows from 404 to 344 for a 324-wide glass, handing the
difference back to the viewscreen.
Verified live: clicking 60px inside the radar from either edge presses
the column button behind it, with feedback in that side's strip (720
and 1350 pixels).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The red banks were thin strips sitting outside the glass, so the click
target was only as tall as the strip. They are now 100px buttons that
extend BEHIND the MFD picture with just a 10px indicator clearing the
edge: the lamp still reads as a slim strip along the bezel, but the
region of the display above or below it is what you press. Paint order
flipped to match - buttons first, glass over them.
The banks are clamped so they can never meet in the middle on a
scaled-down cockpit, and the panes lost 40px of height each (260 vs
300 for a 240-tall glass), which hands that space back to the
viewscreen.
Verified live: clicking 50px inside the picture presses the button
behind it and the press shows in the indicator strip (770 pixels
changed, all of them within the strip).
Amber map columns are untouched for now.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
They were mapped to the config buttons (0x37/0x36), which the 9 and 0
keys already reach from the Upper Right MFD bank. Freeing them gives
players two pad buttons to assign; bindings.txt carries the mapping as
commented example lines so the way to re-enable it is in the file.
Docs and the dist README follow.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Written from the default bindings.txt so it matches what the game
actually writes. Covers the Xbox pad (ASCII diagram plus a table of
every button and its RIO address), the keyboard - numpad flight
cluster diagram, the Shift/Ctrl/Alt throttle and reverse modifiers,
Alt+Q abort - and the panel button banks, showing how the number and
letter rows map onto the five MFD clusters exactly as printed on the
pod board, with the G/B gap keys and the F-key Secondary/Screen
columns. Also notes the keypads being deliberately unbound, the RGB
lamp mirror, and how to rebind with worked examples.
pack-dist copies it to the dist as CONTROLS.txt, flattened to ASCII so
it reads correctly in Notepad while the markdown source keeps its
typography. README links it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Unpacking the zip anywhere now yields one self-contained RP412\
directory instead of scattering ~1000 files into the extraction
folder. The -Zip step stages a copy under the temp dir as RP412\ and
compresses that folder.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two pieces of MFD work that had been sitting in the tree (already in
every build and dist since).
The compact cockpit glass shows the full 640x480 gauge canvas at about
half size, and COLORONCOLOR did that by dropping every other row and
column - which shredded the 1-bit vector strokes and small text.
HALFTONE area-averages instead (with the brush origin set, as MSDN
requires) so the downscaled MFDs stay legible.
L4MFDSPLIT=2 adds an exploded diagnostic view: every display in its
own full-size desktop window at native resolution, decoded exactly as
the pod VDB split them from the single gauge canvas, with no cockpit
compositing and no downscale. It makes an individual MFD readable and
screenshottable at full resolution for comparison against the
emulator per-channel reference windows. L4MFDSPLIT=1 keeps the
composited glass cockpit and stays the default.
Also: .gitignore now covers the packaged RedPlanet-*.zip releases,
which live on the Gitea release page rather than in the tree.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The packer wipes and rebuilds dist\, which silently discarded the
hand-made steam_appid.txt every repack - and without it SteamAPI_Init
fails and the game quietly falls back to TCP, which is the confusing
symptom testers hit. The dist now ships it (480, Spacewar) alongside
the RP412STEAM=1 environ.ini, so copying the folder to a machine with
Steam running is the whole setup. Test doc updated to match.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Closes the gap left by the football commit. Members publish their
picks as lobby member data (tm/ps) alongside their loadout, and the
owner publishes the scenario (sc) so members know when the picks
matter. The lobby room turns into a team sheet: each member row shows
their team and position, and MY TEAM / MY POSITION buttons cycle the
local pick and republish it live, so everyone watches the sides fill
out before the host launches.
The egg builder honors explicit picks and only fills gaps:
- pilots who chose a team get it; the rest are spread across the
host team and one other so the sides stay balanced
- a team with no volunteer runner promotes its first UNPICKED member,
never overriding someone who chose crusher or blocker
- if two pilots on a team both claim runner, the first keeps it and
the second lines up
- colors stay derived: runner in the team runner color, everyone else
in the team color
Verified: a three-pilot egg puts the host on crusher in team color
with an unpicked teammate promoted to runner in runner color, the
other side gets its own runner, and the teams/pilots blocks group
correctly; the lobby room cycles picks and repaints the roster; both
scenarios still pass their single-player regressions.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The setup menu gains a SCENARIO group. Picking Football relayouts the
menu live: the track list swaps to the football-legal set (drops
Paingod Passage and the race build of Freezemoon Freeway, adds the
football build headmf - RPConfig per-scenario invalid lists), the
COLOR and BADGE columns become TEAM and POSITION, and the title
reads MARTIAN FOOTBALL.
The egg builder was restructured around one flat pilot table so both
scenarios share it. Football emits scenario=football, per-pilot team=
and position= entries, and the [teams] / [team::X] / [pilots::X] /
[teambitmap] blocks in RPFootballMission layout (team name bitmaps
generated by the same GDI plasma renderer as pilot names). Colors are
derived rather than chosen, as the arcade did it: the runner wears the
team runner color, crushers and blockers the team color. Multi-pod
games alternate pilots across two teams and give each team exactly one
runner, honoring the host own position pick.
Verified end to end: Football launches from the menu, the engine loads
the football mission (the cockpit shows the RUNNER - GO FOR POINTS
panel), the console marshals it to a scored finish, and the Death Race
path still passes its regression unchanged.
Known gap: lobby members cannot pick their own team or position yet -
the host pick seeds a deterministic assignment.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Carries the worldwide lobby-search filter for cross-region internet
testing (the only change since 4.12.1 besides the README rewrite).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
README.md rewritten around the lineage: Red Planet 4.10 on the
Tesla 1 pod platform, 4.11 the Win32 port, 4.12 the Steamification
of 4.11 - with the arcade-to-consumer replacement table, current
status (v4.12.1 verified on three machines), playing/building/docs
sections brought up to date.
And ahead of internet-wide beta testing: lobby search now applies the
worldwide distance filter - Steam defaults to roughly same-region
results, which would have hidden lobbies from cross-region testers
even though joining them works fine.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The map/radar glass grows from 240x320 to 360x480 on the 1920x1080
canvas (user request - the radar reads best big). The flanking
Secondary/Screen columns, bottom-center placement, and canvas scaling
all follow from the measured size automatically.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The environ.ini reader now skips comments (# or ;), blank lines, and
anything that is not KEY=VALUE, so the shipped file documents the
whole configuration surface: the core settings as-shipped (controls,
renderer, gauge canvas, plasma, single-window cockpit, frame rate,
Steam networking), the optional toggles (keyboard lighting, stick
flip, AA, particles, plasma scale/position, fixed seed), LAN hosting
without Steam, the developer/testing switches (RP412DEVKEYS,
L4CONSOLELEN, the Steam self-test), and the arcade multi-monitor
heritage variables. Stale L4MFDSCALE reference dropped from the
README.
Verified: the game boots on the commented file with values applied
(controls line honored, Steam transport up from the in-file switch).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The polish-backlog item, implemented from vRIO KeyboardLampMirror:
game-commanded RIO lamp states paint per-key RGB keyboards through
Windows Dynamic Lighting (WinRT LampArray). Keys bound to lamp
addresses in the active bindings profile glow with the panel palette
(red banks, yellow Secondary/Screen columns), flash modes use the
exact L4MFDVIEW formula so keyboard and on-screen buttons blink in
step, unbound keys are blacked out so the board reads as the button
field, and zone-lit keyboards fall back to a board-wide mirror of the
strongest lamp. Advantage over vRIO: Dynamic Lighting grants LEDs to
the FOREGROUND app - which is the game - so no Windows settings
dance.
Isolation: L4KEYLIGHT.cpp compiles /std:c++17 + DEFAULT packing +
conformance (per-file vcxproj settings; the engine /Zp1 would break
the WinRT ABI) with a scalars-only interface, and all WinRT work runs
on a private worker thread (watcher, claiming, 100ms paint loop).
On by default with a bindings map present; RP412KEYLIGHT=0 opts out;
missing Dynamic Lighting logs once and stays dormant.
Verified live on the dev laptop: claimed its 24-zone keyboard
(board-wide mirror) during a race; race cycling with per-race
start/stop of the mirror thread stays green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Per the user: the game never reads the pilot keypad, so the numpad
becomes the flight cluster - 8/2/4/6 stick, 7/9 pedals, 0 trigger -
with Shift/Ctrl as throttle up/down and Alt as reverse thrust. That
frees the entire letter board: W/A/S/D/Q/E return to their printed
MFD bank positions and B goes back to being the gap key, so the
default profile now carries the complete unmodified vRIO bank layout.
The keypad addresses stay bindable (arcade key events) but ship
unbound.
Alt as a held flight control meant every release popped the window
menu and stole focus - WndProc now eats SC_KEYMENU. Shift/Ctrl/Alt
key-name aliases added to the parser alongside the .NET names.
Profile parses clean (59 key buttons, 8 key axes); single-player
cycle and key-bomb tests green (Alt+Q abort unaffected).
Machines with an existing bindings.txt keep their old map - delete
the file to take the new defaults.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
PadRIO now loads bindings.txt (vRIO profile grammar: key/pad/padaxis
lines with toggle, deflect/rate, invert/deadzone options) written
self-documenting with the full default layout on first run. The
default is vRIO board-complete map - number and letter rows are the
MFD banks as printed on the panel, F-keys the secondary/screen
columns, numpad the pilot keypad (0x50-0x5F delivered as arcade RIO
KeyEvents, a new PadRIO capability), Space/arrows the joystick
column - with the desktop driving keys carved out: WASD stick, Q/E
pedals, PgUp/PgDn throttle, B reverse (vRIO gap key; R returns to
its bank). Pad bindings unchanged in spirit, plus Panic on LB and
config on Start/Back; axis signs are encoded in the profile now, so
L4PADFLIP flips on top of it.
Default profile parses with zero rejected lines (68 key buttons, 8
key axes, 12 pad buttons, 5 pad axes); single-player cycle and the
key-bomb tests stay green.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Full input-surface audit of the PC keyboard channel. The arcade abort
was the typed ampersand character (0x26), but the Win32 port feeds
WM_KEYUP VIRTUAL-KEY codes into the same channel - and VK_UP is also
0x26. The hat look-up key aborted the mission: that was every mystery
abort across the multiplayer test rounds. Likewise the E key (0x45,
the right pedal!) dumped the event queue on every release.
Disarmed: plain 0x26 and E are swallowed at the L4 layer; the abort
answers only to the deliberate Alt+Q chord (translated to the legacy
engine code, so APP.cpp is untouched); the debug toggles (wireframe
Alt+W, predator vision Alt+V, frame dump Alt+F, perf stats, event
queue on Alt+E now) arm only with RP412DEVKEYS=1. The cheat-string
manager has no PC-keyboard strings and the trace-log keys are
compiled out of release - both inert.
Verified live: a volley of VK_UP releases mid-race leaves the mission
running; Alt+Q aborts on demand. Docs and the dist README updated.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Round seven was the first complete Steam race: three machines, five
minutes, wall deaths respawning, the console ending the race on time,
and rematches launched from the same lobby. The one gap the run showed:
only the owner saw scores - members went straight back to the room.
The owner now publishes its console results (host, score, name, keyed
by the race nonce) into lobby data right after teardown; members pull
the sheet (waiting up to 8s for it to land), inject it into the local
results intake, and the same RACE RESULTS screen shows on every
machine before the room.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Reproduced A/B on the dev box: with RP412STEAM=1 the wired pad
disappears from XInput because Steam Input intercepts Xbox controllers
for AppID 480. One-time client setting fixes it (disable Steam Input
for Spacewar, or globally for Xbox controllers); PadRIO hot-connects
within 3s once released. Our own AppID will configure this
server-side.
environ.ini in the dist now ships RP412STEAM=1 (the packer regenerates
the file, which was wiping the hand edit each round); machines without
Steam credentials fall back to TCP cleanly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Round six raced all three machines (staging fix confirmed) and then
exposed what happens when a pod leaves mid-mission - which arcade pods
never did.
The B crash dump named it exactly: VTV::TakeDamageMessageHandler
resolved message->inflictingEntity to NULL (the entity belonged to the
departed owner) and dereferenced it - Verify is compiled out in
release. Collision damage from an entity that no longer exists is now
ignored.
And the race B and C were left in was a zombie: the owner (console)
had aborted, so the mission clock would count up forever and the
death/respawn flow hung with nobody to arbitrate. Lobby-member races
now set gConsoleLossEndsMission: losing the console mid-mission posts
StopMission locally, the pod tears down, and lands back in the lobby
room. Arcade -net pods keep the re-listen-and-wait behavior.
Loopback hosted race still green.
For the drivers: the ampersand key is the arcade mission-abort - that
was every crash-on-keypress so far; and a sleeping Bluetooth pad wakes
on the Xbox button and hot-connects within 3 seconds (PadRIO
re-probes).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Round five reached the race - full mesh on all three machines, eggs,
ACKs, mission running - but the owner raced ALONE. Cause: the engine
self-runs a pod at WaitingForLaunch when its console host is not
online (the arcade no-console fallback), and the owner''s in-process
console never connects to its own pod. On fast-loading owners the
self-run beat the console''s staging gate, so RunMission was never
sent and the members sat staged at black screens until someone hit
the & emergency-abort key.
gConsoleMarshalsLaunch (APPMGR) now tells the engine an in-process
console owns the launch: the network-race install sets it and the
owner holds at WaitingForLaunch with everyone else; plain single
player leaves it False and auto-runs as always. Verified on loopback:
all pods staged - RUN is back in the hosted-race log and both the
hosted race and the single-player cycle pass.
Also: unhandled-exception minidumps (rpl4crash.dmp beside the exe,
dbghelp loaded lazily) so test-machine crashes hand back stacks.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Round four reached one step from the race: eggs delivered, both
members ACKed with complete meshes, one member entered LoadingMission.
Two failures remained, both now fixed.
One: Steam reports incoming callers under locally-allocated ALIAS
FakeIPs, not their global ones - the owner accepted both mesh legs
but its identity check compared the alias against the egg address and
never counted the connections (no Connected to GameMachineHost on the
owner). The peer table now carries each member SteamID (lobby go
roster gained a field) and Accept resolves the caller identity back
to the global FakeIP the egg promised.
Two: mission load stalls the game thread for 10-30s with nothing
pumping, and Steam default 10s connected-timeout sheared every
connection mid-load (end reason 4001, rx ages 11.5-20.5s - right at
load duration). Connected timeout is now 90s; TCP never timed out an
idle arcade link and races pump every frame once running.
Self-test still green (ping, survives listener close).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Round-three diagnosis from the three-machine logs: the console
channel connected first try on SDR both ways - then died seconds
later with end reason 5010 (PeerSentNoConnection). Cause: the arcade
engine closes its console LISTENER the moment the console connects
(correct under TCP, where accepted sockets outlive the listener), but
Steam''s CloseListenSocket closes all accepted connections
ungracefully. The members silently killed their console connection at
accept; the owner''s next packet got no-connection back, no eggs were
ever fed, and all three pods sat waiting.
The transport now bridges the semantics: an engine close only marks
the listener (new callers are rejected, pending queue dropped); the
Steam socket is destroyed in Cleanup at mission teardown. Re-listening
on the same engine port reopens the marked listener.
The loopback self-test now covers exactly this: accept, close the
listener, then push data both ways over the accepted connection -
PASSED (ping 1, survives listener close 1).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Root cause of the three-machine failure found and fixed. The
connection-status callback was registered as a per-connection config
value pointer - which the steam_api flavor of the library never
dispatches (only the standalone lib does). So members never saw the
incoming connection request, never accepted, and the owner timed out
after 120s of state-5 retries. Valve''s own SpaceWar example registers
SteamNetConnectionStatusChangedCallback_t with STEAM_CALLBACK; the
transport now does the same through a CCallback listener constructed
after SteamAPI_Init.
Proven with the new RP412STEAMSELFTEST=1 loopback: one machine
listens on its fake console port and dials its own FakeIP - the log
now shows incoming/accept/connected on both ends and a verified data
round trip, connect succeeded on attempt 1.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The three-machine test failed at exactly one step: the owner''s
ConnectByIPAddress to a member''s fake console port retried silently
for 120s while the member WAS listening on that port. The transport
threw away Steam''s reason for killing each attempt.
Now every connection state change logs the connection description,
and drops log the end reason plus Steam''s debug string - the next
run will say exactly which subsystem refused (cert, FakeIP directory,
routing, accept). Connect also polls GetConnectionInfo directly
instead of trusting only the callback flags, logs each attempt''s
final state, no longer holds a pointer into the connection table
across mutations, and paces retries at 1s.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
RPL4LOBBY implements the multiplayer front door on ISteamMatchmaking.
The setup menu grows HOST STEAM RACE / JOIN STEAM RACE buttons when
the Steam wire is live; hosting creates a tagged public lobby, joining
finds one. Every member publishes FakeIP + fake ports + persona +
loadout as member data; the room screen lists members (host marked)
and gives the owner a launch button.
Launching writes a nonced go-roster into lobby data. Each pod
registers every peer with the Steam transport (two-port peer table:
engine console/game ports map to Steam fake ports on connect) and
enters the race: the owner through the hosted-race path - it builds
the multi-pilot egg from real personas and loadouts and its console
marshals everyone - and members as network pods that boot straight
into WaitingForEgg for the owner to feed over the wire.
The lobby outlives races: members loop back through WinMain into the
room (no local console needed - MissionCompleted is waived for member
races), and the owner returns to the room after its results screen.
Leaving the lobby clears the hosted-race priming.
Verified on this box: menu buttons appear under RP412STEAM=1, hosting
creates a lobby on the Steam backend, the room runs and leaves back to
the menu; single-player cycling and the LAN hosted race both still
pass. Full three-account mesh test is next, on real hardware.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The lobby-owner-as-console architecture, in-engine. RPL4CONSOLE gains
RPL4LocalConsole_InstallNetworkRace: the owner pod switches to network
mode and meshes like any pod (egg fed locally via FeedLocalEgg, which
now opens the ConsoleOnly state gate), while the console tick also
marshals REMOTE pods over NetTransport speaking the exact arcade
protocol - egg chunks with 5s-retry-until-ACK, 1Hz state polling,
RunMission once every pod stages at WaitingForLaunch, StopMission at
expiry (remotes first, local pod holds until their EndMission scores
land), score intake labeled with [pilots]-order names on the results
screen.
The front end builds the multi-pilot egg: RP412HOSTPODS lists member
console channels (lobby stand-in; the Steam lobby feeds the same
path), RP412HOSTPORT/RP412HOSTADDR set the owner side.
Winsock Connect now redials with a fresh socket per attempt (a refused
TCP socket is dead; the old loop reused it) bounded at 120s - needed
whenever a peer boots after the caller, which is the normal Steam
lobby launch order.
Verified on loopback: member pod in -net, owner hosting from its menu;
mesh completed both sides, 30s race, remote score collected over the
wire (host 3), local stop after the drain, results screen shows both
pilots by name in one process that returns to the menu.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Steamworks SDK 1.64 vendored at extern/steamworks_sdk_164 (headers +
win32 redistributables only; .gitignore trims the rest). Both projects
build with RP412_STEAM; activation stays behind the RP412STEAM=1
environment switch, so plain desktop runs never touch Steam.
L4STEAMTRANSPORT.cpp implements NetTransport on ISteamNetworkingSockets
with FakeIP: SteamNetTransport_Install brings up SteamAPI, relay
network access, and a two-port FakeIP identity (fake port 0 = console
channel, 1 = game mesh), then swaps the process wire; any failure logs
the reason and the game carries on over TCP. Addressing keeps the
engine untouched: all pods share the -net port convention, eggs carry
fakeip:engineport, and the transport alone translates engine ports to
Steam fake ports via the lobby-fed peer table (RegisterPeer). Connect
mirrors the TCP retry-while-refused loop; Receive normalizes message
lanes back into the stream semantics CheckBuffers expects.
Runtime verified on this box: RP412STEAM=1 under AppID 480 came up as
169.254.59.52 (fake ports 32256/32257); without Steam credentials it
falls back to TCP cleanly; default boot logs no Steam lines at all.
steam_api.dll ships in the dist.
Next: the lobby layer (ISteamMatchmaking member data -> RegisterPeer +
egg build + RPL4CONSOLE marshal), which needs a second account to test.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
tools/two-pod-test.ps1 stands up two -net pods on loopback and
marshals them with a minimal console feeder speaking the Munga
protocol (TeslaSuite vendored Munga Net.dll): state polling, egg
chunk delivery with ACK-after-mesh, RunMission when both pods reach
WaitingForLaunch, StopMission(0) at time expiry, EndMission score
intake.
First run passed clean: pod A listened on its game port, pod B
connected from its bound port, both ACKed after the mesh completed,
raced the same 60s mission on Wiseguy's Wake, stopped on command,
and reported final scores. The deterministic TCP mesh works end to
end through the NetTransport seam - the feeder logic is exactly the
marshal the Steam lobby owner will run in-process.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Steam-multiplayer prerequisite from the design doc: L4NET keeps
hosts, message queues, and the deterministic mesh ordering, while
connect/listen/accept/close, send/receive, startup/cleanup, the local
interface list, and ip[:port] parsing move behind NetTransport
(L4NETTRANSPORT.h). WinsockNetTransport carries the existing TCP
behavior over verbatim - including the connect retry-while-refused
loop the egg-ACK ordering relies on - and is the process default;
NetTransport_Set installs a replacement before the network manager
comes up.
L4STEAMTRANSPORT.h documents the ISteamNetworkingSockets mapping
per method (FakeIP keeps [pilots] entries as IPv4 strings) behind
RP412_STEAM until the Steamworks SDK lands.
Also fixed in passing: the ExclusiveBroadcast path sent
sizeof(network_packet) - four bytes of pointer - instead of the
message size, which would have sheared the stream framing had it
ever fired.
Verified: single-player race cycle (menu, race, results, menu, race)
green; -net 8000 boots, listens for a console through the transport,
and idles stable.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
After a console-marshaled race ends, the race loop now shows a RACE
RESULTS screen (place / pilot / final score, sorted descending, with a
CONTINUE button) before returning to the setup menu. Scores come from
the local console's intake; single-player rows carry the pilot's own
name, additional pods show their host number until the Steam roster
maps IDs to personas.
The setup menu also keeps the player's selections and pilot name across
races now instead of resetting to defaults each cycle.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
WinMain now wraps the engine block in a loop: when a front-end-launched
mission ends under the local console, the setup screen comes back in the
same process instead of exiting (the arcade relaunch-per-mission model).
Replaces the CreateProcess self-respawn - required for Steam, where the
lobby and sockets must survive across races.
Second-cycle re-init crash fixed: d3d_OBJECT kept a static texture cache
keyed by filename, so race 2 got IDirect3DTexture9 pointers created on
race 1 destroyed device and died at first draw (DrawMesh AV). The cache
is now flushed in ~DPLRenderer before the device is released, and
ParticleEngine::Initialize drops particles left over from the previous
mission. Verified: three consecutive 30s races in one PID, each stopped
on time by the console with final scores collected.
Also: L4CONSOLELEN env override for test-length races, and the console
exposes MissionCompleted() for the loop.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Domain correction from playtest: hand-fed eggs are a developer shortcut
- a mission only ends on a console command, so the clock hits 00:00 and
counts up forever. Even single-player games need a console marshal.
RPL4CONSOLE is that console. Like the real one it lives on its own
thread: it owns the mission clock and raises the stop request at the
selected length; the app-manager per-frame hook (new gPerFrameHook seam
in APPMGR, called while the application global is live - the loop
condition NULLs it on exit, which ate the first attempt) executes the
engine-safe part, dispatching the same StopMissionMessage TeslaConsole
sent. Final scores flow in through a new RP-layer sink
(gConsoleScoreSink in RPCNSL): RPPlayer feeds it the same score it
sends a real console at mission end.
It also inherits the launcher role: the application tears down after a
stop (arcade pods were relaunched per mission by TeslaLauncher), so
WinMain respawns the process when the console ended the mission,
landing back on the race-setup screen. L4NetworkManager grows
FeedLocalEgg (the single-user egg-inject path, callable mid-session)
for the future in-process loop.
Verified end to end: menu -> 3:00 race -> stop dispatched exactly on
time -> final score collected (host 1 = 4113) -> process respawned with
the front end up. -egg runs stay unmarshaled (the dev shortcut).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Starting without -egg, -net, or -mr now boots a race-setup screen
(RP_L4/RPL4FE.cpp) instead of aborting: track / vehicle / color / badge
/ time-of-day / weather / race length plus pilot name, populated from
TeslaConsole''s RPConfig.xml catalog (Death Race scenario). LAUNCH
builds the egg exactly as the console did - the RPMission.ToEggString
port, including the pilot name pre-rendered to 1bpp plasma bitmaps
(128x32 + 64x16) via GDI with the console''s auto-shrink font logic and
the verbatim ordinal graphics - writes frontend.egg, and injects it
into the standard egg-load path (new L4Application::
SetEggNotationFileName).
The menu is a GDI child of the main window (pod green-on-black, double
buffered, mouse driven, EDIT control for the name) running a modal loop
before engine init; closing the window exits cleanly. Found and fixed
along the way: the empty egg CString holds a NULL representation
(operator! is the safe emptiness test), and the modal loop needed a
queue nudge for launch clicks delivered via SendMessage.
Verified end to end: boot -> menu -> LAUNCH -> generated egg (7.5KB) ->
racing in the 1080p cockpit with score and mission clock running.
start-windowed.bat now boots into the front end.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Findings from TeslaConsole.RedPlanet and L4NET: the pod lifecycle
(egg chunks/ACK, RunMission, telemetry, results), the egg as the entire
mission definition (NotationFile text incl. pre-rendered plasma name
bitmaps), the RPConfig.xml catalog, and the key topology finding -
every pod gets the same egg and builds a deterministic full TCP mesh
from the ordered pilots list (connect to earlier entries, listen for
later). Maps 1:1 onto Steam: lobby owner = console, SteamIDs = pilot
addresses, ISteamNetworkingSockets P2P = the mesh, with a NetTransport
seam at L4NET mirroring the RIOBase pattern. Implementation options and
open decisions listed for signoff.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The 4-8px black padding framing every MFD and the map read as a jarring
border over the 3D. Glass and button strips now run to the pane edges
(last button in each strip/column absorbs the rounding remainder);
only the thin separations between buttons within a strip remain.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
SS_BLACKRECT paints the system window-frame color - gray on modern
Windows - so the viewscreen child is now a plain STATIC subclassed to
erase true black. The MFD/map panes flickered because Paint() cleared
the on-screen surface before redrawing at the fill cadence; the pane
now composes off screen and lands in a single BitBlt.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Playtest: the half-height red buttons did not read well; back to
display_height/8 (18..40px). The contiguous amber map columns stay.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Playtest direction on the canvas layout: all five MFDs at the compact
320x240 glass size - upper pair pushed to the top corners, score glass
top-center, lower pair in the bottom corners, map bottom-center - and
the viewscreen now fills the entire 1920x1080 canvas. Launched with
-res 1920 1080 the 3D renders native 1:1 (the 2007 D3D9 path takes the
1080p backbuffer and 16:9 aspect without complaint). start-windowed.bat
updated accordingly.
Verified live: full-screen native 3D with the cockpit floating over its
edges, mission running, preset lamp lit on the map column.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The cockpit is now a fixed 1920x1080 canvas (uniformly scaled down on
smaller monitors, min 25%):
[ MFD UL 640 ][ MFD UC 640 ][ MFD UR 640 ] <- native glass, 1920 wide
[ viewscreen 800x600 centered ]
[ MFD LL ] [ Map ] [ MFD LR ] <- bottom edge
Playtest direction: the original pods MFDs partially occluded the main
display, and that is used here on purpose - the panes overlap the
viewscreen and render over it (viewscreen pinned to the bottom of the
sibling z-order, WS_CLIPSIBLINGS everywhere, so the 3D present clips
around every pane). Top-row glasses are gauge-canvas native 640x480 -
three across is exactly 1920. Red MFD buttons at half height; the amber
map columns stack contiguous like the pod strips. The auto-fit
scale/L4MFDSCALE machinery is gone - the canvas is the design space.
Verified live at 100% scale: contiguous native top row over the
centered viewscreen, bottom cluster overlapping its lower edge, map and
gauges updating (BOOST values moving, presets lit).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Remove-Item raced a live playtest session and gutted the folder around
the locked files. Detect a running rpl4opt.exe under dist and abort
before deleting anything.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
CydandClaude Fable 5